We have been using our comfortbilt HP22-N for about 3/4 weeks now. For the most part we love it. It's easy to use, easy to clean and maintain. The only thing is the thermostate. We set it to maintain 72 and sometimes it shuts off at 68, sometimes it shuts off at 75. Same thing for coming back on - it's always between 3-5 degrees off in turning off and on. Other than that small inconvience we love it.

While only trying out our new HP22-N during our 1st cold snap, it proved to be everything I had hoped for. Having owned a pellet stove previously, I did research for over a year on the possible purchase of a new stove. I read many reviews, watched a lot of You Tube videos and even talked on the phone with a gentleman from Comfort Bilt. My biggest concern was the noise level, but after the test run, the HP22-N is not noisy! I've got a stock of pellets, waiting for cold weather. Winter will be the test, but I have a feeling our HP22N will prove to be what we have wanted in a pellet stove! Thank You - Comfort Bilt!

We live in The Jemez Mountains in New Mexico. We have a 3 story home. We installed The Comfort Bilt pellet stove on the second floor, we run it on 1 most of the time and maintain 70 degrees. With an 80 lbs hopper the stove runs 2 days. The ash drawer is large so I use an ash vacuum once a month to clean. I love this pellet stove!!! I am going to install a second one for the bottom floor which has a pellet stove, this is an amazing pellet stove I highly recommend.

I have had my HP 22 N pellet stove now for three years this fall. Well use our stove for primary heating and no longer use our central heat. Well love this stove. We burn about 4-5 pallets of pellets a winter. I clean the burn pot once a day and use my ash vacuum every other day. Cleaning only takes a couple minutes at most. I do a major cleaning once a year and that takes about an hour were I remove the fans and clean all internal exhaust passages. You should have a spare parts kit. You should have a extra igniter, a main power switch and a spare burn pot. If you have those you will only be down a few minutes for most of the common maintenance issues that will occured. What should be noted when your igniter wears out taking off the side panel (2 screws ) makes the replacement a five minute job at most. The main switch comes with an extra internal fuse but removal the main switch is a bit tight. The location of the main switch is probably the least thought out part of the stove. The main power switch may take about 30 minutes. We set the thermostat and the stove provides good temperature control for about 1600 sqr ft area. My wife tells me the stove was the best purchase I have ever made. We love the HP 22 N stove.