Forge & Flame 1500 sq. ft. Pellet Stove, 60 lb. Hopper Size, PP60-B
$1,299.99
Forge & Flame 1500 sq. ft. Pellet Stove, 60 lb. Hopper Size, PP60-B
Forge & Flame 1500 sq. ft. Pellet Stove, 60 lb. Hopper Size, PP60-B
Item # 1474097
$1,299.99
or
or
Add this item to unlock free delivery!
Neighbor’s Club Members earn points with purchases.
Forge & Flame 1500 sq. ft. Pellet Stove, 60 lb. Hopper Size, PP60-B
Item # 1474097
$1,299.99
or
or
$109/mo.† suggested payments with 12 Months Financing or earn $64 in Rewards+ on this purchase.
Add this item to unlock free delivery!
Shopping at
Grassland (franklin) TN
Delivery to
For delivery, this item requires a Big & Bulky handling fee.
Free delivery offer on this product..
Neighbor’s Club Members earn points with purchases.
The Forge & Flame PP60 pellet stove combines efficiency, convenience, and environmentally responsible heating. With its powerful heat output, long fuel intervals, and user-friendly features, it is an excellent heating solution for any home, garage, cabin, or workshop. The PP60 is a highly efficient and clean-burning pellet stove that is ready to transform your home heating experience. With its user-friendly dial control and automatic ignition, operating this stove is a breeze. Simply set the dial to your desired temperature and let the stove take care of the rest. Equipped with a 60 lb. hopper capacity, the PP60 can provide steady heat for up to 40 hours before needing to be reloaded. Its automatic firepot purge and impressive 84% thermal efficiency make heating with wood pellets easier and more efficient than ever before. With a heat output of 35,000 BTUs, the PP60 is capable of heating up to 1,500 sq. ft. of living space. Not only does the PP60 offer exceptional performance, but it is also certified to burn clean. Whether you plan to use your pellet stove in your workshop or home, the Forge & Flame PP60 is a versatile choice for your heating needs. It is also approved for use in mobile homes with its included fresh air intake. It comes with a 1-year parts warranty and lifetime toll-free phone support from Forge & Flame, providing you with peace of mind and dedicated assistance whenever you need it.
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
Looking for more information on heaters? Check out our guide on heaters in the product documents section.
- 35,000 BTUs heat output from the pellet stove with an 84% thermal efficiency
- 60 lb. of hopper capacity in the stove to provide steady heat for up to 40 hours between fuel loads
- Automatic ignition and intuitive dial thermostat for easy, comfortable use of the pellet stove
- Uses 3 in. or 4 in. pellet venting
- Mobile home approved with included fresh air intake
- Burns wood pellets for C02 neutral and environmentally responsible heating
- 1 year parts warranty and lifetime toll free phone support
- Variable speed blower distributes heat from the stove for up to 1,500 sq. ft. of living space
| Brand | Forge & Flame |
|---|---|
| Country of Origin | Imported |
| Blower Airflow Rate | 265 CFM |
| Blower Type | Single |
| Catalytic/Noncatalytic | Noncatalytic |
| Flue Exit Shape | Round |
| Ignition Type | Electronic |
| Indoor/Outdoor | Indoor |
| Intended Use Grade | Residential |
| Maximum BTU Heat Output | 35,000 BTU |
| Mounting Location | Freestanding |
| Number Of Blower Speeds | Adjustable |
| Pellet Fuel Type | Wood Pellets |
| Primary Material | Steel |
| Product Height | 33 in. |
| Product Length | 22 in. |
| Product Weight | 195 lb. |
| Product Width | 22 in. |
| Stove Area Heated | 1500 Sq ft |
| Stove Base Type | Pedestal |
| Stove Features | Built-In Thermostat, Blower included |
| Stove Hopper Capacity | 60 lb |
| Installation Type | Freestanding |
| Stove Maximum BTU Output Range | 20,000 - 40,000 |
| Vent Type | Non-Direct |
| Vent Diameter | 3 in. |
| Venting Location | Bottom |
| Warranty | 1 Year Parts, Lifetime Toll-Free Phone Support |
| Manufacturer Part Number | PP60-B |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 167 Questions
Newest questions
Q: do you need to order a separate vent kit
2 days ago2 Answers
- A: Hi kim3, Venting is typically purchased separately. While the stove includes a fresh air intake for mobile home use, any type "L" or "PL" pellet pipe will work for the exhaust venting.2 hours agoHelpful?
Q: pp60 compatible
17 days ago2 Answers
- A: Hello, thank you for your question. Yes, the PP60 and the PP60-B are the same height and diameter of exhaust.13 days agoHelpful?
Q: Is this compatible with Pelpro PP60 pipe placing and size
17 days ago1 Answer
- A: Hello, thank you for your question. Yes, the PP60 and the PP60-B are the same height and diameter of exhaust.16 days agoHelpful?
Q: Does it have a pipe exhaust
20 days ago1 Answer
- A: Hello, thank you for your question. The stove does require exhaust venting. There is a 3" diameter exhaust opening that is required to be vented with "L" or "PL" Class A pellet pipe.20 days agoHelpful?
Q: Can I buy the proper venting kit to complete the installation? If so where ?
28 days ago1 Answer
- A: Typically venting is purchased online. Any type "L" or "PL" pellet pipe will work. Sometimes Tractor Supply also has venting kits in stock.27 days agoHelpful?
Q: My basement floor is a couple of blocks to nderground,can the exhaust go up four feet before going to it the wall
28 days ago1 Answer
- A: Hello Stan. The venting can can up and then elbow to the outside of the home as long as all clearances and specifications in the installation manual are met. You can review the manual by downloading it here: https://downloads.hearthnhome.com/installmanuals/PELPRO_PP60_B_OWNERS_INSTALLATION_7083_801.pdf28 days agoHelpful?
Q: what is the btus on the lowest setting
a month ago1 Answer
- A: Hello, thank you for your question. We don't have a BTU specification for each setting, the minimum BTUs listed is 9,600 / hr while the maximum is 33,200 / hr.a month agoHelpful?
Q: Does it have an ash pan
a month ago1 Answer
- A: Hello Denise, thank you for your question. The PelPro stoves do not have an ash pan. It is recommended that the firebox be swept with a ash vacuum or shop vacuum.a month agoHelpful?
Q: Does it need a chimney to the outside
a month ago1 Answer
- A: Thank you for your question. Yes, all PelPro stoves need to be vented outside.a month agoHelpful?
Q: Does it have auto purge?
2 months ago1 Answer
- A: Hello Beth. If you are asking about an ash pan, there is no ash pan on this stove. If you are referring to cleaning, there is an automated "cleaning" cycle every 90 minutes where the exhaust blower ramps up to blow out excess ash.2 months agoHelpful?
1 - 10 of 167 Questions
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 167 Questions
Newest questions
Q: do you need to order a separate vent kit
2 days ago2 Answers
- A: Hi kim3, Venting is typically purchased separately. While the stove includes a fresh air intake for mobile home use, any type "L" or "PL" pellet pipe will work for the exhaust venting.2 hours agoHelpful?
Q: pp60 compatible
17 days ago2 Answers
- A: Hello, thank you for your question. Yes, the PP60 and the PP60-B are the same height and diameter of exhaust.13 days agoHelpful?
Q: Is this compatible with Pelpro PP60 pipe placing and size
17 days ago1 Answer
- A: Hello, thank you for your question. Yes, the PP60 and the PP60-B are the same height and diameter of exhaust.16 days agoHelpful?
Q: Does it have a pipe exhaust
20 days ago1 Answer
- A: Hello, thank you for your question. The stove does require exhaust venting. There is a 3" diameter exhaust opening that is required to be vented with "L" or "PL" Class A pellet pipe.20 days agoHelpful?
Q: Can I buy the proper venting kit to complete the installation? If so where ?
28 days ago1 Answer
- A: Typically venting is purchased online. Any type "L" or "PL" pellet pipe will work. Sometimes Tractor Supply also has venting kits in stock.27 days agoHelpful?
Q: My basement floor is a couple of blocks to nderground,can the exhaust go up four feet before going to it the wall
28 days ago1 Answer
- A: Hello Stan. The venting can can up and then elbow to the outside of the home as long as all clearances and specifications in the installation manual are met. You can review the manual by downloading it here: https://downloads.hearthnhome.com/installmanuals/PELPRO_PP60_B_OWNERS_INSTALLATION_7083_801.pdf28 days agoHelpful?
Q: what is the btus on the lowest setting
a month ago1 Answer
- A: Hello, thank you for your question. We don't have a BTU specification for each setting, the minimum BTUs listed is 9,600 / hr while the maximum is 33,200 / hr.a month agoHelpful?
Q: Does it have an ash pan
a month ago1 Answer
- A: Hello Denise, thank you for your question. The PelPro stoves do not have an ash pan. It is recommended that the firebox be swept with a ash vacuum or shop vacuum.a month agoHelpful?
Q: Does it need a chimney to the outside
a month ago1 Answer
- A: Thank you for your question. Yes, all PelPro stoves need to be vented outside.a month agoHelpful?
Q: Does it have auto purge?
2 months ago1 Answer
- A: Hello Beth. If you are asking about an ash pan, there is no ash pan on this stove. If you are referring to cleaning, there is an automated "cleaning" cycle every 90 minutes where the exhaust blower ramps up to blow out excess ash.2 months agoHelpful?
1 - 10 of 167 Questions
Similar Items
-
-
-
-
-
Top Rated
-
Top Rated
-
-
-
-
-
Top Rated
-
Top Rated
-
Top Rated
-
Top Rated
Frequently Bought Together
-
Top Rated
-
Top Rated
-
-
-
-
-
-
-
-
-
Top Rated
-
Top Rated
-
-
-
Reviews
Most Helpful Favorable Review
5 out of 5 stars.
Stove is four star and the buying experience a 5.
6 years ago
Purchased this as a replacement for a Pleasant Hearth that worked fine but was getting older so time to get newer equipment. It's essentially the same stove. All components are the same except for the hopper on the Pelpro is way better at 60llbs instead of 40.
Long story short the purchase was perfect. Enfield, Ct store manager interrupted her day to answer shipping questions and actually imputed the order seeing I was older and might struggle a bit.
Stove came really quick. Tractor trailer had a lift gate so getting it down was easy. Box torn but crated so well there was no damage. Installed right where Pleasant Hearth was with no vent pipe modifications needed. Followed very good instructions, the unit fired right up and has been working great. Quieter then the old stove but perhaps that's because it's newer.
I rate Tractor Supply a 5 star on this and I don't do that pretty much ever.
19 people found this helpful
Show Reviews:
Most Helpful Critical Review
1 out of 5 stars.
THE LAST TRACTOR SUPPLY, AND PELPRO, PURCHASE.
2 years ago
Horribly disappointing, not only with this all-but-worthless stove, but also with the extremely poor Tractor Supply, and Pelpro customer service. I was looking for a stove to provide heat for a basement that I had finished, with the finished square footage @ ~700. I decided on this model, stating it is rated for 1500 sq ft. After having this stove professionally installed, I discovered how that this stove could not adequately heat less than half of this claim. Contacted Pelpro with these concerns, only to be told to have the unit assessed, as if they were oblivious to both the wait, and expense, of having a professional return to inspect the stove. At my expense, I was told that the stove was defective. Contacted Pelpro once again, only to be given simple troubleshooting ideas that were looked into initially. I then contacted Tractor Supply, who declined to make things rights, with the window to return, or exchange, the stove had expired due to waiting for a professional to tell me this stove was scrap metal. Meanwhile, Pelpro eventually returns contact with more worthless information, ignoring my report to them from the professional, as they suggested. So now, with over 2k invested, well, more accurately, flushed. My last Tractor Supply purchase, my last dealing with Pelpro.
11 people found this helpful
Show Reviews:
Customer Images and Videos
- purchase
- price
- satisfaction
- installation
- cleaning
- quality
- small
- settings
1 to 4 of 324 Reviews .
1 – 4 of 324 Reviews
Most Recent
St. Johnsville, NY
Review 1
5 out of 5 stars.
Love this stove
3 days ago
We were so happy with this pellet stove, we bought a 2nd one!
SweepstakesYes
Yes, I recommend this product.
Review 1
5 out of 5 stars.
Pp60
21 days ago
Easy to install seems to work great delivery was fast and driver was polite
SweepstakesYes
Yes, I recommend this product.
Response from Forge & Flame:
20 days ago
Forge & Flame
Hello Keith, thank you for taking the time to leave us a kind review. Wishing you many cozy winters with your PelPro stove!
Review 1
1 out of 5 stars.
HUGE PIECE OF GARBAGE
8 months ago
This was the largest waste of money! Purchased in June, finally unboxed and hooked up in October. This thing hasn't worked properly since the day we started it. Called TSC to ask for a replacement and was sent to PellPro directly. This is where we were told, "PellPro is a DIY company where you can fix it yourself". That statement in and of itself is a huge red flag! Wouldn't reputable company want to fix their products and not make the consumer trouble shoot? After replacing several parts, and working on it more hours than it actually functioned PLEASE DO NOT PURCHASE THIS BRAND!!!!!!!
Response from Forge & Flame:
7 months ago
Forge & Flame
Hello Jenny. We are sorry to hear that you were not informed of the warranty and maintenance of this stove before purchase. Yes, PelPro is designed to be a DIY version of our dealer based products so that you can get the same quality at a lower price point. This is the case with most, if not all pellet and wood stoves sold at Tractor Supply. While we would like this to be disclosed so that we ensure that these stoves are the proper fit for you before purchase, that unfortunately does not always happen. We regret to hear that you had issues initially. It sounds like we were able to assist with troubleshooting and utilize the warranty to get your stove back up into running shape. If you need assistance with anything further, we would love the opportunity to help. Otherwise, we hope you have many warm winters to come with your PelPro stove.
Review 1
4 out of 5 stars.
Works
9 months ago
The ash tray fill too quick, have to empty it after it burns 1 bag of pellets.
SweepstakesYes
Response from Forge & Flame:
9 months ago
Forge & Flame
Hello,
Yes, this unit does not have an ash pan, it uses just the firepot. Depending upon how long it is burning and the quality of the pellets, will depend upon how often it is necessary to clean the firepot. Thank you for taking the time to leave us a review! We are happy to hear you are enjoying the cost savings and dependable warmth.
Yes, this unit does not have an ash pan, it uses just the firepot. Depending upon how long it is burning and the quality of the pellets, will depend upon how often it is necessary to clean the firepot. Thank you for taking the time to leave us a review! We are happy to hear you are enjoying the cost savings and dependable warmth.