A: No, the AgKNX 18-21 HP Hydraulic Digger with Multifunction Skid Steer Mounting Plate will not fit your 1974 Bobcat 610 without a specialized adapter. The modern AgKNX digger uses a universal skid-steer quick-attach plate, which is not compatible with the older, pin-on attachment system of the 1974 Bobcat 610.

A: It should work fine but check the measurements in the ad to be sure.

A: Should be fine for your Bobcat

A: Augers are sold separately.

A: We have three listed on Tractor Supply the 18" SKU 193002799 12" SKU 193002499 9" SKU 193002399

A: The AGKNX is just an information website. Our parent website is www.tooltuffdirect.com. Thanks

A: Sorry, we don't sell hay spear tines or fork lift tines with the skid steer mounting plate. We can do a special order and sell them with hay spear tines if you are interested. We also don't have a stump grinder attachment. We do however have a stump planer that works with the powerhead. If you are interested in the stump planer you would need our bigger powerhead / gearbox to operate it. It takes a lot of torque to operate a stump planer. Thanks

A: We have a few different models and I can provide the torques. HP21 is our standard model. Most customer using it to dig holes are pretty happy with this unit. However, if you are using it for a stump planer or other equipment that might require higher torque you might need one of our other powerheads. Hp21 @ 3000 psi the torque is 1373 ft-lbs. HP27 @ 3000 psi the torque is 1893 ft-lbs HP41 @ 3000 psi the torque is 2987 ft-lbs HP49 @ 3000 psi the torque is 3823 ft-lbs If your machine has a higher pressure rating than 3000 psi the torque values will be higher. Hope this helps, Jon

A: Unfortunately the universal skid steer mounting plate that attaches the hydraulic digger to your mini-skid steer will not fit. It's designed for a full size skid steer. The HP21 gearbox/motor will work with your mini skid steer but the mount will not. Sorry.

A: yes.