CountyLine Screw Point Auger, 6-1/3 lb.
CountyLine Screw Point Auger, 6-1/3 lb.
2.969 Reviews
Item # 2100301
$49.99
Get everything you need
Neighbor’s Club Members earn points with purchases.
CountyLine Screw Point Auger, 6-1/3 lb.
2.969 Reviews
Item # 2100301
$49.99
New Cardmembers earn a $20 Reward‡ with qualifying purchase of $20 or more plus earn 5% in Rewards+ on this purchase. Valid through 6/28/26.Apply now
Shopping at
Grassland (franklin) TN
Delivery to
37027
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
Need to replace a damaged or worn auger tip? CountyLine has you covered with this CountyLine Screw Point Auger. With its 2 in. shaft diameter and 6-1/3 lb. weight, this auger point is designed to fit Model 100 diggers (sold separately). Bolt-on style auger point.Spiral Point for 6 in., 9 in. 12in. 18 in. and 24 in. augers
- Replacement auger point
- Compatible with Model 100 diggers (sold separately) for farm and ranch post hole digging applications
- Made of quality cast-iron for strength and performance
- Bolt-in assembly for secure installation
- Size of the auger point's shaft diameter: about 2 in.
- Weighs 6-1/3 lb.
- Made in India
- 1-year limited warranty
| Brand | CountyLine |
|---|---|
| Country of Origin | Imported |
| Auger Diameter | 2 in. |
| Auger Length | 8 in. |
| Auger Material | Steel |
| Auger Speed | 0 rpm |
| Boom Diameter | 0 in. |
| Boom Pole Shape | N/A |
| Compatibility | 6, 9, 12, 18, 24 in. Augers |
| Features | Replacement Point |
| Frame Material | Cast iron |
| Gearbox Ratio | N/A |
| Hitch Type | N/A |
| Lift Capacity | 0 lb. |
| Maximum Tractor Horsepower | CAT 1 OR 2 |
| Minimum Tractor Horsepower | CAT 1 OR 2 |
| Number Of Lifting Loops | 0 |
| Primary Material | Cast Iron |
| Product Height | 8 in. |
| Product Length | 3 in. |
| Product Weight | 6-1/3 lb. |
| Product Width | 2 in. |
| Recommended Auger Part Number | Heavy Duty |
| Warranty | 1 Year Limited |
| Manufacturer Part Number | 71076 |
Start typing your question and we'll check if it was already asked and answered.
1 - 9 of 9 Questions
Newest questions
Q: Will this fit on a Ricoh electric auger?
2 years ago1 Answer
- A: No, Compatible with Model 100 diggers2 years agoHelpful?
Q: will this replacement tip fit in my 1.5 inch bore hole
2 years ago1 Answer
- A: With its 2 in. shaft diameter and 6-1/3 lb. weight, this auger point is designed to fit Model 100 diggers (sold separately). Bolt-on style auger point.2 years agoHelpful?
Q: I purchased two of these from TSC, both didn't last long. The current one was picked up 29 May 2023, used the first time today (26 Aug 2023) and the tip broke The previous one lasted for a month, how do I get replacements or money back? Aren't any good!
2 years ago1 Answer
- A: Contact your local TSC store for assistance.2 years agoHelpful?
Q: are there optional or upgradable tips available? fish tail or better material? we have hard pan where i’m at.
3 years ago1 Answer
- A: Unfortunately, the spiral point is the only tip that we have available.3 years agoHelpful?
Q: Do these come any shorter? I dug 80 holes with mine yesterday in some pretty nasty digging and three times when I didn't catch it in time it screwed itself in to where I had to fight it back out by hand. Great auger, just a little too hungry sometimes.
5 years ago1 Answer
- A: They don’t come shorter. When you dig a lot of holes in difficult ground you are likely to have to manually solve the issue.5 years agoHelpful?
Q: Is this supposed to be loose at the end of the auger bit? I bought a new 9 inch auger and this screw point tip just swings freely and then the whole auger starts shaking.
5 years ago3 Answers
- A: The screw point tip is replaceable and held on by a bolt. It is recommended to make sure the bolt is tight.5 years agoHelpful?
Q: Do you have other replacement points for this auger? I need a strong one to go through DG, this one is just useful for sand and soft dirt. Thank you, Ricardo
5 years ago1 Answer
- A: No, but you can purchase the carbide cutting edge that hooks on above the screw point - 2” carbide cutting edge part number S24122200.5 years agoHelpful?
Q: What is the one year limited warranty on the auger bit
6 years ago1 Answer
- A: For replacement parts, and manufacture warranty information please contact Customer Service at (888) 376-9601 available Monday-Friday 8am-8pm (EST), Saturday 8am-5pm (EST).6 years agoHelpful?
Q: What are the dimensions of the drive, the flutes and overall legnth
7 years ago1 Answer
- A: The overall length is 8.40” the actual point is 6 1/16 “ The angle of the flute is 40 degrees. The overall angle dimension is 10 degrees from center.7 years agoHelpful?
Similar Items
Items You May Like
-
-
-
-
-
-
-
-
-
Top Rated
-
-
-
Customers Also Bought
Reviews
- falling over
- purchase
- shortcoming
- quality
- drilling
- price
- dirt
- dirt
1 to 4 of 69 Reviews .
1 – 4 of 69 Reviews
Most Recent
South Texas
Review 1
5 out of 5 stars.
Bad Boy
10 months ago
This tip is a beast. Had to grind my collar back 1/8" so it would bolt up because I have a Belton but holy crap this bad boy digs. Did 50 holes under an hour.
Yes, I recommend this product.
Review 1
5 out of 5 stars.
Excellent
a year ago
Excellent, no complaints
west virginiag
Reviews 2
5 out of 5 stars.
Post hole digger parts
2 years ago
Great product! would buy again.
SweepstakesYes
Yes, I recommend this product.
Anonymous
Douglas WY
Review 1
5 out of 5 stars.
Good
3 years ago
For the price these are good. Just hard to find