Sportsman 4,000/3,500 W Dual-Fuel Generator/Welder
$499.99
Sportsman 4,000/3,500 W Dual-Fuel Generator/Welder
Sportsman 4,000/3,500 W Dual-Fuel Generator/Welder
Item # 142058699
$499.99
or
or
Notice:
This Item cannot be shipped to CA.Add a protection plan
Powersport plans are not available in CA.
Neighbor’s Club Members earn points with purchases.
$499.99
or
or
$42/mo.† suggested payments with 12 Months Financing or earn $24 in Rewards+ on this purchase.
Out of stock at or near
Grassland (franklin) TN
This item is not available
Search Stores
Temporarily unavailable
Notice:
This Item cannot be shipped to CA.Add a protection plan
Powersport plans are not available in CA.
Neighbor’s Club Members earn points with purchases.
The Sportsman 4000/3500-Watt Dual-Fuel Generator/Welder has everything you need for the job in one package. Able to handle the needs of most contractors, this dual-fuel generator/welder is also great for homeowners and recreational activities. Equipped with four 120 Volt outlets and a whole lot more, this dual-fuel generator/welder can handle almost everything you need at the job site. Try Sportsman's versatile dual-fuel generator/welder today!
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
- Great dual-fuel generator/welder for a variety of applications
- 4,000 surge watts and 3,500 running watts can run the RV, household appliances, and power tools
- Dual-fuel generator/welder utilizes either unleaded gasoline or LPG propane gas a s a fuel source (propane tank not included)
- 7.0 HP engine, 4 stroke, 212cc, air cooled, recoil start, OHV 4 stroke engine with AVR, recoil start, single phase
- Dual-fuel generator/welder offers: 9 hour run time with a 50 percent load on an full 3.2 gal. gas tank, or 12 hours with a full 20 lb. propane tank
- (4) 120V AC outlets (each 20 amps), (1) 120V RV outlet (30 amps), (1) 12V DC outlet (8 amps) for battery charging, circuit protection
- AC/DC circuit reset, engine shut off switch, welding power switch, low oil shutdown; oil capacity: 18.5 oz. SAE 10W30,
- Dual-fuel generator/welder puts out less than 69 dB noise with no load at 23 ft.
- Comes with a DC connector wires for charging 12 Volt automotive-type batteries, a spark plug wrench, and a 5 ft. regulator hose kit
- Surge watts / running watts may be reduced by 10% when using propane fuel vs. gasoline
- EPA approved, Non-CARB compliant/Not for sale in California
- High altitude use: this generator is not recommended for high altitude use above 3,000 ft.
- Inverter power manages input fluctuations for better welds and more control
- Comes TIG ready for scratch start, over/low voltage protection, anti-sticking, and hot start
- Welds mild steel, stainless steel, cast iron, and hard surfacing
- Powered by the generator, 120V input, 60Hz, 25.75 amps, single phase
- 76V DC no load voltage, duty cycle 25% at 85A, 10 to 85 AMP DC output range
- Uses 1/16, 5/64, and 3/32 inch (1.6-2.5mm) electrodes, E6013, E7014, E7018, and stainless steel suggested
- Dual-fuel generator/welder equipped with 6 ft. welding cable with electrode holder, 6 ft. ground cable with earth clamp, face mask, and wire brush
| Brand | Sportsman |
|---|---|
| Country of Origin | Imported |
| Description | Dual Fuel 4000 Surge Watt Generator Plus Stick Welder/TIG ready |
| Engine Brand | Sportsman |
| Engine Displacement | 212cc |
| Features | Duel Fuel 3500 Running Watts/ 4000 Surge Watts with |
| Fuel Tank Capacity | 3.2 gal. |
| Fuel Technology | Dual-Fuel |
| Accessories Included | None |
| Generator Amperage | 30A |
| Generator Running Watts | 3500W |
| Generator Starting Watts | 4000W |
| Generator Voltage | 120V, 12V |
| Number of Circuits | 2 |
| Number Of Outlets | 6 |
| Operational Volume (dB) | 69 dB |
| Outlet Types | 120V/30A |
| Packaged Height | 21 in. |
| Packaged Length | 25.5 in. |
| Packaged Weight | 102 lb. |
| Packaged Width | 21.25 in. |
| Power Type | Gas, Propane |
| Primary Color | Gray |
| Product Height | 25 in. |
| Product Length | 19 in. |
| Product Weight | 19.5 in. |
| Product Width | 112 lb. |
| Recommended Application | Campsite, Job Site, Recreational, Tailgating |
| Run Time at Full Load | 4 hours on Gasoline , 6 hours on Liquid Propane |
| Run Time at Half Load | 9 hours on Gasoline , 12 hours on Liquid Propane |
| Start Type | Recoil |
| Manufacturer Part Number | GEN4000DF-STW |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 30 Questions
Newest questions
Q: Can this welder will five thirty second welding rods
a year ago1 Answer
- A: The welder has an infinite current control. It is capable of welding with electrodes up to 3/32” diameter. Welds Up To 1/8˝ With 1/16 in., 5/64 in. or 3/32 in.Anonymousa year agoHelpful?
Q: Are longer welding leads available?
a year ago1 Answer
- A: No we only have the set that comes with the generator welder.Anonymousa year agoHelpful?
Q: What gauge wire is used for the welding leads?
a year ago1 Answer
- A: Welding Machine Max No load Voltage (V) 72 Current Range (A) 10-85 Duty Cycle 25% Usable electrodes (mm) 1.6-2.5Anonymousa year agoHelpful?
Q: Does it come with welding leads?
a year ago1 Answer
- A: yes it doesAnonymousa year agoHelpful?
Q: How long are the welding leads?
a year ago1 Answer
- A: Power Supply 120V, 25.7A, 60 HZ, Single Phase No-Load Voltage 72 Volts DC Output Range 10 - 85 Amp DC Duty Cycle 25% @ 85A Suggested Electrode E6011, E6013, E7018, Stainless Steel Electrode Diameter 1/16 in, 5/64 in, 3/32 in Inverter Power Will Maintain Fluctuations In Input Power For Better Welding And Dependable Output Welds Carbon Steel/Stainless Steel Thermal Overload Protection & Arc Force Over/Low Voltage Protection, Anti-Sticking, & Hot Start Welds Up To 1/8˝ With 1/16 in., 5/64 in. or 3/32 in. Electrodes 10 - 85 AMP Welding Range Input Voltage: 120V - 60 Hz Rated Duty Cycle: 25% @ 85A WELDER IMPORTANTAnonymousa year agoHelpful?
Q: What gauge are the welding leads?
a year ago1 Answer
- A: Max No load Voltage (V) 72 Current Range (A) 10-85 Duty Cycle 25% Usable electrodes (mm) 1.6-2.5Anonymousa year agoHelpful?
Q: Are the welding leads Dinse 35-70, or LC40?
a year ago1 Answer
- A: it is dinse 35-70Anonymousa year agoHelpful?
Q: Hi what gauge are the welding leads 2, 3, or 4 gauge
a year ago1 Answer
- A: Power Voltage(V) 120 Power Frequency(Hz) 60 Max Input Power(KVA) 3 Efficiency(%) 85 Max No load voltage(V) 72 Current range(A) 10-85 Duty cycle 25%Anonymousa year agoHelpful?
Q: Does it come with longer leads
a year ago1 Answer
- A: no it does notAnonymousa year agoHelpful?
Q: Can you tell me how soon this will be available for purchase again
2 years ago2 Answers
- A: The answer you received was not from the manufacture. We have them available at https://www.buffalocorpstore.com/product/dual-fuel-generator/Anonymous2 years agoHelpful?
1 - 10 of 30 Questions
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 30 Questions
Newest questions
Q: Can this welder will five thirty second welding rods
a year ago1 Answer
- A: The welder has an infinite current control. It is capable of welding with electrodes up to 3/32” diameter. Welds Up To 1/8˝ With 1/16 in., 5/64 in. or 3/32 in.Anonymousa year agoHelpful?
Q: Are longer welding leads available?
a year ago1 Answer
- A: No we only have the set that comes with the generator welder.Anonymousa year agoHelpful?
Q: What gauge wire is used for the welding leads?
a year ago1 Answer
- A: Welding Machine Max No load Voltage (V) 72 Current Range (A) 10-85 Duty Cycle 25% Usable electrodes (mm) 1.6-2.5Anonymousa year agoHelpful?
Q: Does it come with welding leads?
a year ago1 Answer
- A: yes it doesAnonymousa year agoHelpful?
Q: How long are the welding leads?
a year ago1 Answer
- A: Power Supply 120V, 25.7A, 60 HZ, Single Phase No-Load Voltage 72 Volts DC Output Range 10 - 85 Amp DC Duty Cycle 25% @ 85A Suggested Electrode E6011, E6013, E7018, Stainless Steel Electrode Diameter 1/16 in, 5/64 in, 3/32 in Inverter Power Will Maintain Fluctuations In Input Power For Better Welding And Dependable Output Welds Carbon Steel/Stainless Steel Thermal Overload Protection & Arc Force Over/Low Voltage Protection, Anti-Sticking, & Hot Start Welds Up To 1/8˝ With 1/16 in., 5/64 in. or 3/32 in. Electrodes 10 - 85 AMP Welding Range Input Voltage: 120V - 60 Hz Rated Duty Cycle: 25% @ 85A WELDER IMPORTANTAnonymousa year agoHelpful?
Q: What gauge are the welding leads?
a year ago1 Answer
- A: Max No load Voltage (V) 72 Current Range (A) 10-85 Duty Cycle 25% Usable electrodes (mm) 1.6-2.5Anonymousa year agoHelpful?
Q: Are the welding leads Dinse 35-70, or LC40?
a year ago1 Answer
- A: it is dinse 35-70Anonymousa year agoHelpful?
Q: Hi what gauge are the welding leads 2, 3, or 4 gauge
a year ago1 Answer
- A: Power Voltage(V) 120 Power Frequency(Hz) 60 Max Input Power(KVA) 3 Efficiency(%) 85 Max No load voltage(V) 72 Current range(A) 10-85 Duty cycle 25%Anonymousa year agoHelpful?
Q: Does it come with longer leads
a year ago1 Answer
- A: no it does notAnonymousa year agoHelpful?
Q: Can you tell me how soon this will be available for purchase again
2 years ago2 Answers
- A: The answer you received was not from the manufacture. We have them available at https://www.buffalocorpstore.com/product/dual-fuel-generator/Anonymous2 years agoHelpful?
1 - 10 of 30 Questions
Similar Items
-
-
-
-
-
-
Top Rated
-
-
-
Top Rated
-
-
-
Reviews
Summary of Reviews
This versatile unit effectively welds and powers tools, though some users found the welding leads short and the welding shield flimsy. While the generator portion worked well for most, a few felt the welder lacked sufficient power for their needs. Overall, the product provides good value for basic w...
- English
- German
- French
- Spanish
- Portuguese
- Italian
- Korean
- Chinese
- Japanese
- Arabic
Customer Images and Videos
- price
- large
- small
- in-store
- performance
- refund
- returns
- sawing
1 to 4 of 87 Reviews .
1 – 4 of 87 Reviews
Most Recent
Review 1
5 out of 5 stars.
Good value
a year ago
For a price that would be a deal for a generator alone you get a DC stick welder added In. I’ve got 2-3 hours of welder under this piece to this point so I’m comfortable with saying this thing works. My only criticism is the length of the welding leads included. I made a set of longer leads and this thing rocks. So far I haven’t even put gas in it and have just run it off a propane tank. If you’re looking for a light-duty portable stick welder I think you will be happy with this one.
SweepstakesYes
Yes, I recommend this product.
Review 1
1 out of 5 stars.
Machine doesn’t work
a year ago
Received the welder put oil and fuel in it motor will not start unless on starter fluid called manufacturer who said there was nothing they could do for me do not recommend this machine unless you want to but a large paperweight
No, I do not recommend this product.
Claudville, Va.
Review 1
5 out of 5 stars.
Sportsman
a year ago
This generator/welder is a great piece of equipment for anyone's shop. It's great for lite jobs.
SweepstakesYes
Yes, I recommend this product.
Review 1
1 out of 5 stars.
No warranty repair service nearby
a year ago
will not run smooth
SweepstakesYes
No, I do not recommend this product.