I opted for the wood floor model instead of mesh since my mower weighs just over 550lbs and just standing on the mesh caused it to bow quite a bit. I got a deal on it since they were out of the mesh model at the Thanksgiving sale. Pulled it home right off of their lot. Noticed it was doing a slight "dog-walk" while pulling it and heard a variety of squeaks and rattles the whole way home. Upon crawling under it, the left side axle u-bolts appeared to have never been tightened and the axle had shifted on the spring a bit causing the dog-walk. Easy fix. As previously mentioned the welds are a bit sloppy and they don't put a lot of paint on it. The gate hinges could have been welded on the other way so my mower deck doesn't hang up on them when loading, but I'll take care of that soon enough. A few hours of work and tweaking to my liking and I think it will provide me years of service. Just do a once over on all of the critical suspension bolts before putting anything on it!

Have had the trailer just over a year and the welds and metal have started breaking . The supports that are used to hold up the ramp have broken and will have to be welded or replaced . havent used a lot but for the price one pays for these you would expect better quality ! Would look else where for trailer or just be perpared to weld up the parts .,its a simple enough fix if you weld but still somthing one shouldnt have to do after just 1 year and very little use ,rust etc