I bought it online and had it delivered to our local store. It got there quickly. My husband assembled it and had no problems with that. It’s easy to hook to our mower, and it’s going to make yard work easier.

I had problems, from the get-go! Major one was missing part. There was supposed to be “2” bed braces / supports. Mine only had 1! Second problem was that the bolt holes didn’t match! We used a punch, to try to make them match, and that “kind of “ helped relieve that problem. Although, we did have to drill 6-10, of the holes to get a bolt through! I don’t think the Tail Gate is going to survive a couple of weeks, if it does the first day of actual use. They do need to clean up their instructions, it was confusing on a few pieces on just how they fit. Plan on stiffening it up in the near future

I used it haul bags of concrete around and it worked great!

I need bearings for this cart the bearings were never even greased failed two weeks in

I bought this cart to replace an older one of the same model. I am surprised that the new one is not as well built as the old one. The tailgate of the new one is one stamped piece and the old one is thicker and had a much better way of sliding into the open rear of the cart. It bent the first time some wood hit it. Also directions said leave bolts loose during assembly in several places, but never says to tighten them after assembly. Not an issue with me, but for a novice, that could be a problem.

I don't ever recall posting a negative review of a product before, but this is really a product to avoid if you are going to do more than the very lightest of work. I bought it to replace a cart bought more than a dozen years ago and I felt it looked very similar. What a mistake! The metal of the body is so flimsy that the side panels and especial tailgate bend if anything substantial is carried even if half the recommended weight in wood or soil. Nothing keeps the sides firmly upright enough to keep the tailgate from falling out if there is the slightest pressure on the sides from the load. I use a tight bungee cord and it helps but, particularly going up a slope, the tailgate still falls out half the time. Two months later, I am discarding it and buying a new cart that I can see first in the store. I will never buy a product of this type on line again.

Easy enough to put together, mostly. Instructions were a little confusing at one point but there's a great video on it. Tires are already going flat, easily punctured by goathead stickers. Tailgate does not fit well (falls off) so bed will not hold a full load.

Definitely needs 2 people to assemble. Otherwise good

Didn't make it past the first step of assembly. Hex axle nuts cut improperly.....didn't fit. Couldn't squeeze them in with a pair of channel locks. One thing i don't do is mess around with things that don't work properly. Built in Mexico. No instruction manual.....only pictures.

Great little cart! It was fairly easy to put together for a 70 year old Grandma. Just what I needed to tote stuff around behind my mower.

Very flimsy, so much so that it doesn't stay square and the sides can be moved in or out with just a push of a hand. If I had seen it already assembled at the store I would not have purchased it.

We use a similar one form a friend. We abused it beyond reason. Even though the constitution is sheet mental, it's much more durable than usual sheet mental of the same guage. What I don't like about this trailer is that it's small for my garden tractor. The garden tractor accessory market doesn't make anything similar that would fit my application. The other opinions are poly beds that have their own problem. I agree with other reviewers about Assembly being a little difficult. I find those kinds of assembly problems normal. When it comes to metal things seem to change from the concept product to mass production. All of the holes are close enough that a little feness makes it all work.

On the positive side, customer service is good. The product, however is junk. Iassembled the cart to find that the tailgate was bent and wouldn't fit. Customer service said it wasn't a problem, just bend the sides of the cart and it will fit. This cart will not last long. I recommend you spend more money and buy something with thicker steel

I have purchased two of the steel carts. The tires are terrible and deflate constantly. My husband is sick of replacing and repairing them. The cart is fine, but the tires should be the ones that can't go flat. Disappointed....

lot of screws to put together but well explain.the only problem is the back slide gate. to week to weak metal and dimension loose on this part.

Quality is lacking. A one piece bed would’ve been a better choice

Was missing some bolts for assembly but the local store provided them without cost when I went to the store and spoke to them about it. Once assembled, very pleased with it. Just what I needed!

My husband loves his new dump cart. I think this will work well for years to come.

I hope this will last as long as the last one .( 22 years )

A little hard to assemble. When you have three layer of steel, its hart to line up the holes. However, I am 82 years old and was able to get the job done. I have about an acre and a half lot and the small dump cart is exactly what I need. From time to time I have to cut down small trees. the cart works great to haul them off. Its great to haul dirt and fertilize around the lot.

Came in 4 days, read reviews, expected junk, got something quite nice, no dents just two holes didn’t match, drilled out holes got something that looks and works good

Great product and value. Excellent product support. Thank you.

Spreader works well. It is easy to use The only issue I had was the flow adjustment cable was defective but it was replaced under warranty very quickly.

good value, packaging or handling allowed damage to two pieces of sheet metal for the box. no feedback on durability yet

Easy assembly, great price. I sprayed truck bed liner coating on and undercoating on bottom and a plywood board in the cart. Need grease and 2 extra washers for assembly.

This dump cart is super easy to assemble. Excellent quality for the money!

The cart seems to be just as advertised, and even though we've not actually had the opportunity to load it up with a very heavy load, it does seem to be able to carry and dump a good sized load without problem. I gave a 4-star review as a couple of the pieces were bent (even though all were packed well), but my husband was able to straighten both pieces, and made them work.

Some of the best written assembly instructions I have ever seen. All parts and holes lined up perfectly. I am very pleased and impressed. Cart has already paid for itself in usage.

Good solid cart with dumping ability and priced reasonably.

Very cheaply made. Slide mechanism won't move if you have more than 25lbs of fertilizer. The weight is enough that the wire slide mechanism will bend when you try to open and close it. The stop for the application rate also will not stay where you set it so you end up putting on more fertilizer than you need. Don't waste your money on it!