Spreader Review is a great product. Super easy to use.

Very courteous and professional service I was short some components and they stood by their products and sent them to me right away thank you so much

I received the spreader on a Friday. Went to put together on Saturday and there were parts that did not fit. Called on Monday to Agrifab. Still waiting for parts...

I gave five stars for these reasons; 1 - price. It is marketed as “made in USA” and comparable in price to the made elsewhere brands. 2 - size and weight. I don’t have a ton of storage for lawn implements. It pulls good behind my riding mower, it’s easy to hook up and unhook, and it can be stood up on its back and takes up little space. 3 - It works! The hopper is wide and tall enough for me to easily load 40 lb. bags of fertilizer. It would probably do 50 lb. bags too, but I only loaded what I had. The flow or spread rate is easy to adjust by loosening, setting, then tightening the setting knob. Then , from the mower’s seat you can shift its spread lever from off to the flow rate you selected. Reach to the lever to raise the transport wheels, that puts the spikes down on your lawn. That’s all there is to it. Oh, start your mower. 4 - the first thing I noticed is the spikes on the aerator sink completely into the ground in most of my yard, as I expected it to do. It is best however, to use the aerator after a rain if the soil is hard and dry. So the aerator part gets 5 stars. 5 - the bonus is, while you are aerating your lawn you have the option to spread seed, fertilizer, weed control, or whatever. All the way across the bottom of the hopper are slotted holes that allow the hopper to spread whatever you have in it. And there’s a lever that controls when and how much you want to spread, reachable from your seat. As the spikes turn a gear and chain turns an agitator at the inside bottom of the hopper that insures you get spread rate until the hopper is empty. It is a little complicated to assemble. All the information is provided - but not on the same page. You have to flip back and forth to make sure you are using the correct parts provided. I would suggest laying everything out first then read the instructions carefully and it will go together. The results are worth the trouble.