Water Source Well System Pressure Switch, 20/40 PSI
Item # 1028053
Get everything you need
Neighbor’s Club Members earn points with purchases.
Item # 1028053
Shopping at
Grassland (franklin) TN
Delivery to
37027
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
This Water Source Well System Pressure Switch signals the pump to start when the water system drops to 20 PSI (factory set) and stops at 40 PSI (factory set). This well pump pressure switch is to be used with submersible well or jet pumps. It can be wired 115-volt or 230-volt. This pump pressure switch must be used in conjunction with a well pressure tank. The air pressure in the well tank, when empty of all water, must be set to 18 PSI, or the switch will not operate properly.
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
- Signals the pump to start when the water system drops to 20 psi (factory set) and stops at 40 psi (factory set)
- Can be wired 115 volt or 230 volt
- Well pressure pump switch for use with submersible well or jet pumps (that can create up to 40 pounds of pressure)
- Motor wires are connected to the 2 middle posts (color does not matter)
- Breaker box wires are connected to 2 outside posts (color does not matter)
- 2-spring design allows for adjustment of cut-in and cut-out pressure settings
- Adjustments to springs should only be made by users with good knowledge of well systems
- Tank must be in good condition in order for pressure pump switch to work properly
| Brand | Water Source |
|---|---|
| Country of Origin | Imported |
| Compatibility | For use with submersible well pumps or as a replacement switch |
| Package Quantity | 1 |
| Primary Color | Gray |
| Primary Material | Steel |
| Product Height | 3.95 in. |
| Product Length | 3.95 in. |
| Product Weight | 0.89375 lb. |
| Product Width | 3.75 in. |
| Pump Accessory Type | Switches |
| Manufacturer Part Number | PS2040 |
Q: I can not find any pressure switch that says can be used with section pump. Can this 20/40 pressure switch be used with a section pump?
2 years ago- A: Hi there, For this specific inquiry please contact the manufacturer at Watersource 1-800-346-76112 years agoHelpful?
Q: How do I set the pressure tank to 18 lbs of pressure with no water in it? Am I to pump up the tank with air before turning on the well pump?
4 years ago- A: For additional product support, please contact the manufacture.4 years agoHelpful?
Q: What size and male or female thread is the air pressure connector?
9 years ago- A: There is a female 1/4" water pressure connector. There is no air pressure connector.9 years agoHelpful?
Similar Items
-
-
-
-
Top Rated
-
-
-
-
Top Rated
-
-
-
Top Rated
-
Top Rated
Items You May Like
-
-
-
-
-
-
-
-
-
-
Top Rated
-
-
Customers Also Bought
-
-
-
-
Top Rated
-
Top Rated
-
-
Top Rated
-
-
-
Top Rated
-
-
Top Rated
Reviews
- instructions
- quality
Good quality pressure switch.
Yes, I recommend this product.
Farmers
Yes, I recommend this product.