CountyLine Galvanized Mesh Gate, 16 ft. L x 50 in. H at Tractor Supply Co.
Skip to Main Content
MESSAGE

CountyLine Galvanized Mesh Gate, 16 ft. L x 50 in. H

SKU # 360296699
Product price

Save Up To
See Price in Store
Why?
Product Rating is 4.8
4.8
(5)

Financing Available! Click here for more details...

Quantity

Delivery Options:

Item Information

Safely Confines Your Small Animals

Keep your small livestock safe and secure. CountyLine Galvanized Mesh Gate is designed to prevent your hogs, goats and sheep from escaping while also protecting them from potential predators.

Provides Easy Access

CountyLine Galvanized Mesh Gate is designed to make it easy for you and your small livestock to get in and out. This wire filled walk-through is extremely sturdy so you can safely pass through with large equipment. The gate also comes with a chain latch to ensure your animals do not escape.

Avoids Potential Injuries

This 16 ft. utility gate has round corners without sharp edges, and is made of extremely durable but smooth steel rods that keep your animals safely enclosed with minimal chance of injury.

When it Comes to Your Animals, We Don't Compromise Quality

CountyLine Galvanized Mesh Gate uses a special galvanized finish that provides ultimate strength and protection to ensure this gate will last for years.

Specs:

  • 16 ft. L x 50 in. H Mesh Gate
  • 1 3/4 in. diameter steel tubing with superior continuous-welded saddle joints
  • Galvanized finish to ensure longer life in the field
  • Bolt-on hinges allow gate to be easily reversed when hanging two gates together

Specification Description
For Use With: Hogs, Goats & Sheep
Product Type: Gates
Length: 16 ft.
Height: 50 in.
Product Weight: 72 lb.
Included: Hinges, Lag Screws and Chain Latch
Brand: CountyLine
Manufacturer Part Number
CountyLine Galvanized Mesh Gate, 16 ft. L x 50 in. H is rated 4.8 out of 5 by 5.
Rated 5 out of 5 by from Two years later... I bought this gate to replace a twenty year old hat channel gate. This gate is much lighter and easier to manually open / close. The gate looks much better than the older one and keeps my dogs in while keeping other animals out. After two years of daily use and harsh Florida weather, this gate has held up extremely well. I am purchasing another to use at a different location in my field.
Date published: 2017-10-03
Rated 5 out of 5 by from Gate Review This gate looks well made. Hope it stands the test of time.
Date published: 2017-05-12
Rated 5 out of 5 by from Over priced I have two of these gates and they have worked well for years. I was going to buy 2 more 16' gates for a big driveway. My local feed and seed dealer had the same gate 50 bucks cheaper.
Date published: 2014-09-14
Rated 4 out of 5 by from Not what is pictured I looked this gate up on line and went to the store to purchase it. It didn't look right when I put it in my trailer. When I got back on the internet I noticed they were showing a gate with rounded corners. The one I got has square corners. I would have complained if I had noticed this before I picked it up. The gate works fine and I can live with the squared off look. Just wish they would show the right product on line. I'll be more cautious next time.
Date published: 2012-12-05
  • y_2018, m_6, d_15, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_360296699, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_tractorsupply
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

What is the overall length of this gate, also the OA length to center of hinge pivot. Picture shows rounded top corners are these gates the same as picture or did they change to straight butt welds. Thanks.

Asked by: poncons
All gates are 3” shorter than listed length to allow for gate hardware. Yes, the gates have rounded top corners as shown in picture.
Answered by: ErlindaC
Date published: 2018-05-10

What is the sizing of the grid pattern on this gate?

Asked by: HillbillysKatahdins
This is a graduated wire mesh. It runs from 1-3/4” at the bottom to 4” at the top.
Answered by: KirwinH
Date published: 2017-10-05
  • y_2018, m_6, d_15, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_360296699, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING)]
  • clientName_tractorsupply
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT