Lincoln Electric EASY MIG 140
Lincoln Electric EASY MIG 140
Item # 2472312
Stocked & Ready
$799.99
or
or
Buy a Welder and Get 15% off Welder accessories.
Get everything you need
Neighbor’s Club Members earn points with purchases.
Lincoln Electric EASY MIG 140
Item # 2472312
Stocked & Ready
Buy a Welder and Get 15% off Welder accessories.
$799.99
or
or
$67/mo.† suggested payments with 12 Months Financing or earn $39 in Rewards+ on this purchase.
Shopping at
Grassland (franklin) TN
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
Whether you are a home DIYer or a professional Lincoln Electric EASY MIG 140 wire feed welder is the perfect tool for your next project. Requiring a common 120-volt input power, the EASY MIG 140 can be used almost anywhere. With its simple two knob controls and lightweight wire drive system; this compact welder is easy to use - even for beginners! The user-friendly interface makes dialing in easier and yields a smooth arc with minimal splatter. Lincoln Electric EASY MIG 140 is an excellent choice for light fabrication, home shops and farm repairs. With its protective metal case, the machine stays strong through the elements.
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
Looking for more information on welders? Check out our guide on welding in the product documents section.
- WELD ANYWHERE: Plug in the EASY MIG 140 wire feed welder anywhere 120V input power is available
- WELDING CAPABILITES: Weld up to 140 Amps and a maximum thickness of 5/16in
- EXTRA PROTECTION: Metal case provides protection from the elements
- PORTABLE: Ideal for maintenance and mobile welders
- EASY-TO-USE: Simple two-knob control for wire speed and voltage
- PERFECT FOR ANY WELD JOBS: This machine is best for DIY projects, hobbyists, home repairs and more
- HEAVY DUTY WIRE DRIVE: Fully adjustable drive system reduces the chance of wire tangling and crushing
- ENHANCED QUALITY: Brass-to-brass gun connection enhances conductivity
- Application: Shop, Farm, and Home
- MIG Aluminum Welder capabilities with spool gun sold separately
| Brand | Lincoln Electric |
|---|---|
| Country of Origin | Imported |
| Compatible Metal | Aluminum, Steel |
| Compatible Wire Types | Solid |
| Features | WELD ANYWHERE: Plug in the EASY MIG 140 wire feed welder anywhere 120V input power is available |
| Ground Cord Length | 10 ft. |
| Gun Length | 10 ft. |
| Input Frequency | 60 Hz |
| Maximum Open Circuit Voltage | 33 OCV |
| Maximum Welding Amperage | 140A |
| Maximum Wire Diameter | 0.045 in. |
| Maximum Wire Feed Speed | 500 ipm |
| Maximum Material Thickness | 0.3125 in. |
| Minimum Amperage Output | 40A |
| Minimum Generator Power Required | 120V |
| Power Cord Length | 10 ft. |
| Product Height | 13.7 in. |
| Product Length | 17.9 in. |
| Product Weight | 50 lb. |
| Product Width | 10.15 in. |
| Rated Output at 20Percentage Duty Cycle | 90A |
| Spool Size Capacity | 4 in. |
| Warranty | 3 Years |
| Welder Input Voltage | 120V |
| Welding Applications | Flux-Core Welding (FCAW), MIG Welding (GMAW) |
| Phase | Single Phase |
| Polarity | DC |
| Manufacturer Part Number | K2697-1 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 8 of 8 Questions
Newest questions
Q: Does it require a 20a breaker or is a 15a fine?
4 months ago2 Answers
- A: a 20 amp breaker is recommended3 months agoHelpful?
Q: How many amp service does this unit require?
4 months ago1 Answer
- A: Hi Larp22! This unit requires a 20 amps.4 months agoHelpful?
Q: Is using gas is mandatory for this welder
5 months ago1 Answer
- A: Hi Neighbor! Using shielding gas is not mandatory.5 months agoHelpful?
Q: Will a 3500 running watt generator provide adequate power?
5 months ago1 Answer
- A: Hi Neighbor! A 3500-running-watt generator is generally the bare minimum for a Lincoln Electric EASY MIG 140, providing enough power for light-duty, intermittent, or lower-setting welding, but it will likely overload if used continuously at high power. For optimal, uninterrupted performance, a 5,000-watt or higher generator is recommended.5 months agoHelpful?
Q: Do you have a gasless welder combination plasma cutter
7 months ago1 Answer
- A: Thank you for your question! The Lincoln Electric EASY MIG 140 is a MIG welder designed for both gas-shielded and flux-core (gasless) welding applications. However, it does not include a plasma cutter or function as a combination unit.7 months agoHelpful?
Q: how does the E ASY MIG140 compare to the POWER MIG 140 MP
10 months ago1 Answer
- A: The Lincoln Electric EASY-MIG® 140 is a straightforward MIG/Flux-Cored welder built for ease of use—perfect if you only need wire welding on steel and stainless. It’s heavier (about 50 lbs) and single-purpose, but simple and reliable. The POWER MIG® 140 MP offers more flexibility: it can run MIG, Flux-Cored, Stick, and even DC TIG. It’s lighter (around 34 lbs), more portable, and gives you options for different welding processes. The trade-off is higher cost and a bit more complexity. Bottom line: Choose the EASY-MIG 140 if you want simple, dependable MIG welding. Pick the POWER MIG 140 MP if you want one machine that covers multiple processes.10 months agoHelpful?
Q: lost my owners manuel -what are the letters ABCD - I have .035 wire and want to weld on 3/16" angle iron where should i set machine
a year ago2 Answers
- A: On your welder, the letters A, B, C, and D typically refer to voltage settings, and the numbers control wire feed speed. For welding 3/16" angle iron with .035" wire, a good starting point would be setting your machine to 3D: 3 is your wire feed speed—this is on the lower side, but a good baseline. D is the hottest voltage setting, which gives you the heat needed to get good penetration on 3/16" steel. You can always fine-tune from there depending on your weld results. Also, check the inside front panel of your welder—there’s usually a procedure decal guide there with recommended settings for wire type, thickness, and more.a year agoHelpful?
Q: What is the amperage input requirement?
a year ago1 Answer
- A: Hi, Input Frequency 60 Hz Maximum Open Circuit Voltage 33 OCV Maximum Welding Amperage 140A Maximum Wire Diameter 0.045 in. Maximum Wire Feed Speed 500 ipm Maximum Material Thickness 0.3125 in. Minimum Amperage Output 40A Minimum Generator Power Required 120Va year agoHelpful?
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 8 of 8 Questions
Newest questions
Q: Does it require a 20a breaker or is a 15a fine?
4 months ago2 Answers
- A: a 20 amp breaker is recommended3 months agoHelpful?
Q: How many amp service does this unit require?
4 months ago1 Answer
- A: Hi Larp22! This unit requires a 20 amps.4 months agoHelpful?
Q: Is using gas is mandatory for this welder
5 months ago1 Answer
- A: Hi Neighbor! Using shielding gas is not mandatory.5 months agoHelpful?
Q: Will a 3500 running watt generator provide adequate power?
5 months ago1 Answer
- A: Hi Neighbor! A 3500-running-watt generator is generally the bare minimum for a Lincoln Electric EASY MIG 140, providing enough power for light-duty, intermittent, or lower-setting welding, but it will likely overload if used continuously at high power. For optimal, uninterrupted performance, a 5,000-watt or higher generator is recommended.5 months agoHelpful?
Q: Do you have a gasless welder combination plasma cutter
7 months ago1 Answer
- A: Thank you for your question! The Lincoln Electric EASY MIG 140 is a MIG welder designed for both gas-shielded and flux-core (gasless) welding applications. However, it does not include a plasma cutter or function as a combination unit.7 months agoHelpful?
Q: how does the E ASY MIG140 compare to the POWER MIG 140 MP
10 months ago1 Answer
- A: The Lincoln Electric EASY-MIG® 140 is a straightforward MIG/Flux-Cored welder built for ease of use—perfect if you only need wire welding on steel and stainless. It’s heavier (about 50 lbs) and single-purpose, but simple and reliable. The POWER MIG® 140 MP offers more flexibility: it can run MIG, Flux-Cored, Stick, and even DC TIG. It’s lighter (around 34 lbs), more portable, and gives you options for different welding processes. The trade-off is higher cost and a bit more complexity. Bottom line: Choose the EASY-MIG 140 if you want simple, dependable MIG welding. Pick the POWER MIG 140 MP if you want one machine that covers multiple processes.10 months agoHelpful?
Q: lost my owners manuel -what are the letters ABCD - I have .035 wire and want to weld on 3/16" angle iron where should i set machine
a year ago2 Answers
- A: On your welder, the letters A, B, C, and D typically refer to voltage settings, and the numbers control wire feed speed. For welding 3/16" angle iron with .035" wire, a good starting point would be setting your machine to 3D: 3 is your wire feed speed—this is on the lower side, but a good baseline. D is the hottest voltage setting, which gives you the heat needed to get good penetration on 3/16" steel. You can always fine-tune from there depending on your weld results. Also, check the inside front panel of your welder—there’s usually a procedure decal guide there with recommended settings for wire type, thickness, and more.a year agoHelpful?
Q: What is the amperage input requirement?
a year ago1 Answer
- A: Hi, Input Frequency 60 Hz Maximum Open Circuit Voltage 33 OCV Maximum Welding Amperage 140A Maximum Wire Diameter 0.045 in. Maximum Wire Feed Speed 500 ipm Maximum Material Thickness 0.3125 in. Minimum Amperage Output 40A Minimum Generator Power Required 120Va year agoHelpful?
Similar Items
-
-
Top Rated
-
-
Top Rated
-
Top Rated
-
-
-
-
Top Rated
-
-
-
Top Rated
Items You May Like
-
-
-
-
-
-
-
Top Rated
-
Top Rated
-
-
Top Rated
-
-
Reviews
1 to 0 of 1 Review .