The STKR Concepts MPI Multi-Point Illumination Light features the Multi-Point Motion Activated Lighting System. The indoor motion sensor light creates five points of light, all from your existing fixture! These 5 points spread light to all corners of the room, filling the entire space and reducing shadows caused by single-point illumination. These indoor motion lights install in minutes and are powered by a standard ceiling fixture, eliminating the need to hire an electrician to properly light large spaces like a garage, attic, or basement. The motion sensor ceiling light can be installed as easily as a light bulb. Then, position and mount the 4 satellite light pods anywhere in the room, up to 9.5 feet away from the hub. The power wires for the satellite light pods plug directly into the main hub and any excess cable is retracted by the cable maintenance system designed into each pod. The end result is five points of illumination filling the entire room with 7500 lumens of light. Nearly 10x the light output of a traditional light bulb. The MPI is equipped with the newest tech in motion sensing and can detect even the slightest movements. Immediately upon entering the room, or as the garage door budges, the entire area is flooded with light. This motion sensing technology is fully adjustable. Turn the sensitivity to high for large rooms and the MPI will detect movement from up to 20' away. Turn the sensitivity down for smaller rooms or turn this feature off to control the MPI with the light switch as you would any traditional light. In addition, the MPI has a feature to temporarily override the motion sensor with your existing light switch. Finally, the MPI offers a USB power port in the main hub, allowing users to easily plug any security camera directly into the main hub and power it from that single power source. Cameras can be placed anywhere on the ceiling without the need to run long extension cords up the wall and across the ceiling.