DuraVent PelletVent 4 in. 45-Degree Elbow
DuraVent PelletVent 4 in. 45-Degree Elbow
Item # 175285199
$129.99
Neighbor’s Club Members earn points with purchases.
$129.99
New Cardmembers earn a $20 Reward‡ with qualifying purchase of $20 or more plus earn 5% in Rewards+ on this purchase. Valid through 8/9/26.
Out of stock at or near
Grassland (franklin) TN
Out of stock delivering to
37027
Neighbor’s Club Members earn points with purchases.
Stay ready for any project with the DuraVent PelletVent 4 in. 45 Degree Elbow . This elbow offsets obstructions as needed. This elbow swivels 360 degrees at the base. The double-wall, insulated design of this elbow ensures superior performance. The angle is not adjustable.
- UL listed for clearance to combustibles in the USA
- Air-insulated design for superior performance
- Seams are factory-sealed on all elbows, tees and fittings for resistance
- Ships one four inch tool
| Brand | DuraVent |
|---|---|
| Country of Origin | Made in USA |
| Burner System | N/A |
| Cabinet or Housing Material | Stainless steel |
| Coverage Area | 0 N/A |
| Features | Air-Insulated |
| Finish | Other |
| Fuel Flow Rate | 0 N/A |
| Fuel Type | None |
| Heater Control | None |
| Heating Unit Type | N/A |
| Ignition Type | None |
| Indoor/Outdoor | Indoor |
| Intended Use Grade | Residential |
| Maximum BTU Heat Output | 0 N/A |
| Mounting Location | Other |
| Number Of Heat Settings | N/A |
| Primary Material | Stainless Steel |
| Product Height | 8.19 in. |
| Product Length | 8.19 in. |
| Product Weight | 6.32 lb. |
| Product Width | 4.63 in. |
| Run Time | 0 N/A |
| Warranty | Limited Lifetime |
| Manufacturer Part Number | 4PVL-E45S |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 1 of 1 Question
Newest questions
Q: can I use this 45' directly from stove into return pipe that extends through wall
3 years ago1 Answer
- A: Hi jimboskeena, Thanks for your question. Here is what I received from our vendor- We usually start with an appliance adapter first. Then screw and seal with 500RTV silicone sealant. If a 45 Elbow fits directly to the outlet of the stove you may screw and seal it in place.3 years agoHelpful?
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 1 of 1 Question
Newest questions
Q: can I use this 45' directly from stove into return pipe that extends through wall
3 years ago1 Answer
- A: Hi jimboskeena, Thanks for your question. Here is what I received from our vendor- We usually start with an appliance adapter first. Then screw and seal with 500RTV silicone sealant. If a 45 Elbow fits directly to the outlet of the stove you may screw and seal it in place.3 years agoHelpful?
Similar Items
-
-
Top Rated
-
-
Top Rated
-
-
-
-
Top Rated
-
-
-
Top Rated
-
Items You May Like
-
-
-
-
-
Top Rated
-
Top Rated
-
Top Rated
-
-
-
-
Top Rated
-
Reviews
1 to 0 of 2 Reviews .