Forge & Flame 2000 sq. ft. Pellet Stove, 70 lb. Hopper Size, PP70
$1,399.99
Forge & Flame 2000 sq. ft. Pellet Stove, 70 lb. Hopper Size, PP70
Online Only
Forge & Flame 2000 sq. ft. Pellet Stove, 70 lb. Hopper Size, PP70
Item # 1358272
$1,399.99
or
or
Neighbor’s Club Members earn points with purchases.
Online Only
Forge & Flame 2000 sq. ft. Pellet Stove, 70 lb. Hopper Size, PP70
Item # 1358272
$1,399.99
or
or
$59/mo.† suggested payments with 24 Months Financing or earn $69 in Rewards+ on this purchase.
Valid 5/15/2026 - 7/5/2026
Valid 5/15/2026 - 7/5/2026
This item is available online only
Delivery to
For delivery, this item requires a Big & Bulky handling fee.
Free delivery offer on this product..
Neighbor’s Club Members earn points with purchases.
Heat up to 2,000 square feet with the powerful and efficient Forge & Flame PP70 pellet stove. With its 70-pound hopper capacity, you only need to reload the fuel every 48 hours, ensuring continuous and steady heat. Operating this stove is a breeze, thanks to the intuitive dial thermostat and automatic ignition feature. The PP70 is a highly efficient and clean-burning pellet stove, meeting the EPA emissions standards for all 50 states, including Washington, Oregon, and California, and is certified to the 2020 US EPA standards. This means you can enjoy the warmth and comfort of this stove while also benefiting from its environmentally responsible design. To ensure efficient heat distribution, the Forge & Flame PP70 comes with a powerful 265 CFM variable speed blower, effectively circulating warm air throughout the room to provide you with maximum comfort. The stove burns wood pellets, which are CO2 neutral, further contributing to its eco-friendly design. Whether you plan to use your pellet stove in your workshop or home, the Forge & Flame PP70 is a versatile choice for your heating needs. It is also approved for use in mobile homes with its included fresh air intake. It comes with a 1-year parts warranty and lifetime toll-free phone support from Forge & Flame, providing you with peace of mind and dedicated assistance whenever you need it.
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
Looking for more information on heaters? Check out our guide on heaters in the product documents section.
- More heat: 42,000 BTUs with 89% efficiency.
- Less refueling: 70-pound hopper capacity provides steady heat for up to 48 hours between fuel loads.
- Simple operation: Automatic ignition and intuitive dial thermostat for easy, comfortable heat.
- Venting: Uses 3-inch or 4-inch pellet venting.
- Standard, powerful 265 CFM variable-speed blower to distribute the heat.
- Clean burning: Burns so clean that it meets the EPA emissions standards for all 50 states including Washington, Oregon and California and is certified to the new 2020 US EPA standards.
- Burns wood pellets for CO2 neutral and environmentally responsible heating.
- Mobile home approved pellet stove with included fresh air intake.
- 1 year parts warranty and lifetime toll free phone support.
| Brand | Forge & Flame |
|---|---|
| Country of Origin | Imported |
| Blower Airflow Rate | 265 CFM |
| Blower Type | Double |
| Catalytic/Noncatalytic | Noncatalytic |
| Energy Efficiency Rating | 0.49 gram/hr |
| Flue Exit Shape | Round |
| Ignition Type | Electronic |
| Indoor/Outdoor | Indoor |
| Intended Use Grade | Residential |
| Maximum BTU Heat Output | 42,000 BTU |
| Mounting Location | Other |
| Number Of Blower Speeds | Adjustable |
| Pellet Fuel Type | Wood Pellets |
| Primary Material | Steel |
| Product Height | 33 in. |
| Product Length | 22 in. |
| Product Weight | 198 lb. |
| Product Width | 22 in. |
| Stove Area Heated | 2000 Sq ft |
| Stove Base Type | None |
| Stove Features | N/A |
| Stove Hopper Capacity | 70 lb |
| Installation Type | Freestanding |
| Stove Maximum BTU Output Range | 20,000 - 40,000 |
| Vent Type | Non-Direct |
| Vent Diameter | 3 in. |
| Venting Location | Back |
| Warranty | 1 Year Parts Warranty, Lifetime Phone Support |
| Manufacturer Part Number | PP70 |
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 90 Questions
Newest questions
Q: Do I need to vent this heater outside
4 months ago2 Answers
- A: Thank you for your question. Yes, all PelPro pellet stoves require exhaust venting.2 months agoHelpful?
Q: On the PelletPro 70 model how many btu's is the lowest setting?
9 months ago1 Answer
- A: Hello, Thank you for your PP70 question! The BTU's on the lowest setting would be 9,603/hr. With 35,278 BTU's /hr at the highest setting. You are able to access the manual for the PP70 on our website: https://forgenflame.com/products/pelpro-pp70-pellet-stove. Thank you9 months agoHelpful?
Q: Can I use a 3 to 6 inch top vent offset adapter to vent this out an existing 6” masonry flue with stainless liner?
9 months ago1 Answer
- A: Hello, Thank you for your PelPro question. We recommend contacting our PelPro techs by calling 877-427-3316. They will have more questions about your specific installation before being able to give you an answer. Thank you9 months agoHelpful?
Q: How much electricity does it take to run. How big of a solar generator would I need
a year ago1 Answer
- A: Thank your inquiry. Currently the electrical rating for the PP130-B is 120 VAC, 60 Hz, Start 2.6 amps, Run 2.3 amps. We have not tested our stoves to ran off of generators of any kind. We can not guarantee the efficiency of the stove while running on a generator. If you were to run it that way we would recommend a clean sine wave inverter to be used. This is not guarantying that it would run efficient or may not harm the electronics of the stove. Please let us know if you have any additional questions.a year agoHelpful?
Q: can I put this on a timer to turn on
a year ago1 Answer
- A: This stove does not have a timer option.a year agoHelpful?
Q: If power is lost shile stove is running, will it auto restart when power is restored?
a year ago1 Answer
- A: Our units will not automatically restart after a power outage. The stove will go back to its ready state after power is restored.a year agoHelpful?
Q: What position should the damper be left in on thermostat control
a year ago1 Answer
- A: Hi Wayne, there is no damper on PelPro units. For further support, please reach out to our consumer care team: https://www.pelprostoves.com/contact-us/ask-a-questiona year agoHelpful?
Q: Will this stove operate without electricity?
2 years ago1 Answer
- A: Hi there, these stove requires electricity to operate. In the event of a power outage, these stoves can be plugged to a steady state generator to continue operating. Battery backup systems are available from Tripp-Lite. A good inverter/charger with auto switching paired up with a marine deep cycle battery can keep you warm when the power is out. We hope this helps!2 years agoHelpful?
Q: how do one get approved for the fiancing we are a tractor supply member
2 years ago1 Answer
- A: Hi, You have two options, use the link below to apply online. Make sure you scroll down to the bottom of the page. If you cant click on the link, copy and paste it into a website browser. https://www.tractorsupply.com/tsc/cms/credit?cm_sp=LP-_-Customer+Solutions-_-Financing+O ***Tractor Supply Customer Service*** 877-718-6750 Monday - Saturday 7am-9pm CST Sunday 8am-7pm CST Closed Easter Sunday and Christmas Day2 years agoHelpful?
Q: say you want to keep temperture at 70 will stove ease up when reaching 70
2 years ago1 Answer
- A: Hi, Yes, this stove comes with a thermostat.2 years agoHelpful?
1 - 10 of 90 Questions
Q&As
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 90 Questions
Newest questions
Q: Do I need to vent this heater outside
4 months ago2 Answers
- A: Thank you for your question. Yes, all PelPro pellet stoves require exhaust venting.2 months agoHelpful?
Q: On the PelletPro 70 model how many btu's is the lowest setting?
9 months ago1 Answer
- A: Hello, Thank you for your PP70 question! The BTU's on the lowest setting would be 9,603/hr. With 35,278 BTU's /hr at the highest setting. You are able to access the manual for the PP70 on our website: https://forgenflame.com/products/pelpro-pp70-pellet-stove. Thank you9 months agoHelpful?
Q: Can I use a 3 to 6 inch top vent offset adapter to vent this out an existing 6” masonry flue with stainless liner?
9 months ago1 Answer
- A: Hello, Thank you for your PelPro question. We recommend contacting our PelPro techs by calling 877-427-3316. They will have more questions about your specific installation before being able to give you an answer. Thank you9 months agoHelpful?
Q: How much electricity does it take to run. How big of a solar generator would I need
a year ago1 Answer
- A: Thank your inquiry. Currently the electrical rating for the PP130-B is 120 VAC, 60 Hz, Start 2.6 amps, Run 2.3 amps. We have not tested our stoves to ran off of generators of any kind. We can not guarantee the efficiency of the stove while running on a generator. If you were to run it that way we would recommend a clean sine wave inverter to be used. This is not guarantying that it would run efficient or may not harm the electronics of the stove. Please let us know if you have any additional questions.a year agoHelpful?
Q: can I put this on a timer to turn on
a year ago1 Answer
- A: This stove does not have a timer option.a year agoHelpful?
Q: If power is lost shile stove is running, will it auto restart when power is restored?
a year ago1 Answer
- A: Our units will not automatically restart after a power outage. The stove will go back to its ready state after power is restored.a year agoHelpful?
Q: What position should the damper be left in on thermostat control
a year ago1 Answer
- A: Hi Wayne, there is no damper on PelPro units. For further support, please reach out to our consumer care team: https://www.pelprostoves.com/contact-us/ask-a-questiona year agoHelpful?
Q: Will this stove operate without electricity?
2 years ago1 Answer
- A: Hi there, these stove requires electricity to operate. In the event of a power outage, these stoves can be plugged to a steady state generator to continue operating. Battery backup systems are available from Tripp-Lite. A good inverter/charger with auto switching paired up with a marine deep cycle battery can keep you warm when the power is out. We hope this helps!2 years agoHelpful?
Q: how do one get approved for the fiancing we are a tractor supply member
2 years ago1 Answer
- A: Hi, You have two options, use the link below to apply online. Make sure you scroll down to the bottom of the page. If you cant click on the link, copy and paste it into a website browser. https://www.tractorsupply.com/tsc/cms/credit?cm_sp=LP-_-Customer+Solutions-_-Financing+O ***Tractor Supply Customer Service*** 877-718-6750 Monday - Saturday 7am-9pm CST Sunday 8am-7pm CST Closed Easter Sunday and Christmas Day2 years agoHelpful?
Q: say you want to keep temperture at 70 will stove ease up when reaching 70
2 years ago1 Answer
- A: Hi, Yes, this stove comes with a thermostat.2 years agoHelpful?
1 - 10 of 90 Questions
Similar Items
-
-
-
-
-
Top Rated
-
-
-
-
-
-
Top Rated
-
Top Rated
Items You May Like
-
-
-
-
-
-
-
-
-
-
Top Rated
-
-
Customers Also Bought
-
-
-
-
-
-
Top Rated
-
-
Top Rated
-
-
-
-
Reviews
Summary of Reviews
The product is generally well-received, with customers praising its effective heating performance, good pellet efficiency, and easy maintenance. Many appreciate the "wood heat feel" it provides. Howev...
Most Helpful Favorable Review
5 out of 5 stars.
Nice stove
7 years ago
I have burned firewood for years but with getting older I wanted a less labor intensive way to heat as well as inexpensive compared to fossil fuel this stove is the ticket heats my cabin beautifully 1700 square feet.
22 people found this helpful
Show Reviews:
Most Helpful Critical Review
1 out of 5 stars.
Junk!
5 years ago
I've had problems with this stove since day one! I mean new out of the create this stove did not function as intended! I've replaced the ambient temp probe, the vacuum switch, exhaust temp probe and the auger motor all under warranty of course. They never offered to replace the stove but rather send me parts.. I am not a pellet stove technician this should not be my problem to solve! But still these issues should not exist on a new stove! This stove continues to red light even while burning the recommended Tractor Supply brand pellets!
7 people found this helpful
Show Reviews:
- purchase
- satisfaction
- installation
- price
- starting
- cleaning
- cleaning
- ease of use
1 to 4 of 265 Reviews .
1 – 4 of 265 Reviews
Most Recent
Review 1
5 out of 5 stars.
Beautiful stove
a month ago
It’s a beautiful stove only had about 2 weeks but so far it’s been great
SweepstakesYes
Response from Forge & Flame:
a month ago
Forge & Flame
Hello Liz,
Thank you for taking the time to leave us a review. We are happy to hear you are enjoying the cost savings and dependable warmth. Enjoy!
Thank you for taking the time to leave us a review. We are happy to hear you are enjoying the cost savings and dependable warmth. Enjoy!
Review 1
4 out of 5 stars.
Annie
3 months ago
Ll does great but doesn't want to adjust to the weather sometimes but I love my pellet Stone
SweepstakesYes
Response from Forge & Flame:
2 months ago
Forge & Flame
hello Venus, thank you for leaving us a review. Sometimes the settings need adjusted due to external variables. If you need any clarification or assistance with the settings, please feel free to reach out at (877) 427-3316.
Review 1
1 out of 5 stars.
No ash drawer/Motor failure before 90 days
5 months ago
I bought mine at Menards, on 9/26/25 and yesterday 12/24/25, the electric feeder motor died. So now I am waiting on parts, on a barely 3 month model. This unit is not built to run weeks at a time, !There is NO ash tray! So even with the trim set correctly, ash builds up after 3 or so days and you have to shut it down and cool off and clean. I hate the thermostat!! To keep a consistent burn you either have to have it at low or high, because God forbid you want a constant temp that is in-between, low or high. It will turn on and off to regulate the heat from setting 2-9, problem is because there is no way to dump ashes, the unit will kill itself because of failure to reignite, after the ash builds up. All units are going to have ash, it doesn’t matter, but PelPro doesn’t give you the ability to limit ash buildup up around the ignition. Poor design, I wish I would have done more research. I grew up with a pellet stove that was built in the late, 90’s it was 9 years before we ever replaced a part and had an ash draw, like all units should. If you are only going to use this unit up at a cabin in a garage, it might fit the bill for you. If you want this to heat all winter day-in day-out, I would recommend you go with a better unit or brand.
Response from Forge & Flame:
5 months ago
Forge & Flame
Hello,
You are correct, there is no ash tray, and if you would read page 23 of the Owner's Manual you will see we do give a Pro Tip on how to maintain the stove. We also discuss what type of pellets create more ash and which create less. We are sorry you did not understand how our unit is constructed or how it would need to be maintained. We would appreciate the chance to help you with your stove. You may call PelPro at 877-427-3316 to speak to our customer servcice.
Thank you
You are correct, there is no ash tray, and if you would read page 23 of the Owner's Manual you will see we do give a Pro Tip on how to maintain the stove. We also discuss what type of pellets create more ash and which create less. We are sorry you did not understand how our unit is constructed or how it would need to be maintained. We would appreciate the chance to help you with your stove. You may call PelPro at 877-427-3316 to speak to our customer servcice.
Thank you
Anonymous
Jefferson Township, PA
Review 1
4 out of 5 stars.
decent pellet stove for the money
6 months ago
Its a good pellet stove. Seems to be pretty efficient and its doesn't make as much ash as I thought it would be dealing with. My last house, I had a Harman and really wanted to go with that again, but wasn't sure if the layout of the new house would allow heat to get everywhere since its an old farmhouse with small rooms. Still struggling with that, but to "test" the idea, this was a lot cheaper than a Harman. I do wish it had a removable ash pan that I could empty without shutting the stove down. It also has a tendency to bounce pellets outside of the burn pot (I think this is from the back pc of the burn pot where it has a bend in it that faces the burn pot) All in all, its a decent stove for the money.
SweepstakesYes
Yes, I recommend this product.
Response from Forge & Flame:
6 months ago
Forge & Flame
Hello Dave. Thank you for taking the time to leave this review. We are glad to hear that you went with a PelPro. If you need any assistance with your stove's performance, please feel free to give us a call at (877) 427-3316. Wishing you a warm and cozy winter!