Red Shed 23 in. LED Scarecrow Groundbreaker Halloween Animatronic with Sound

A: If your new animatronic only works when you physically touch it, it is almost certainly stuck in "Try Me" mode, or the sound sensor requires a much sharper vibration to trigger. Because you just unboxed the Red Shed 23 in. LED Scarecrow Groundbreaker from Tractor Supply, check these three common fixes to get the sound activation working properly: 1. Remove the "Try Me" Cord Most store-bought animatronics ship with a temporary "Try Me" button plugged into the main control box so shoppers can test it on shelves. • Look at the battery/control housing. If there is a thin wire plugged into a small jack (separate from the main power/battery components), unplug it completely. • Leaving a "Try Me" cord plugged into the jack locks the prop into a manual-trigger-only mode, disabling the built-in sound sensor. 2. Switch from "Demo" to "ON" Check the toggle switch right next to the battery compartment. It usually has three positions: • DEMO / TRY ME: Only activates when you press a button or disturb the base. • OFF: Completely shuts down. • ON / SENSOR: This is the setting you need. Switch it fully to ON. If it is already on "ON," flip it back and forth a few times to ensure the switch isn't stuck halfway between contacts.

A: You secure the Red Shed 23 in. LED Scarecrow Groundbreaker by placing its flat base directly on flat ground and using ground stakes or small landscape staples around the base frame to anchor it against the wind. Place a small hidden rock or flat brick behind or inside the base structure if you expect strong winds.

A: The item is indoor and “outdoor covered porch” due to the head and hand movement components.