I used this to paint a metal cabinet that supports a round column mill. I fallowed the directions: Surface smooth, clean & dry. Temp between 70 - 80 Deg. Several light coats (I made 4) 24 hours apart. It turned out PERFECT! Tough paint! Wont scratch or chip and it has been impervious to oils. It has been left with cutting oils, lube oils and grease on it for days. I wipes right off and looks new. Just like all good work don't rush it! IT DRYS SLOW! (so let it be).

I bought two cans of this to paint a mower. I went to all the trouble to completely disassemble the mower, sandblasted the deck, degreased with acetone, primed it with etching primer, painted five coats of this following the label directions to let it dry 24 hours between coats, and let the deck sit in the sun for a week to cure. Upon reassembly had a small fuel leak. This paint bubbled up and flaked off almost immediately everywhere the gasoline touched. This paint is far inferior to the Valspar tractor and implement previously sold at Tractor Supply. I painted many things with that paint and it is very durable and highly resistant to gas/oil etc. This paint is very poor in that regard. I will never buy this brand again.