Majic 1 pt. Enamel Reducer, Clear

A: Hi Neighbor! Yes, Majic Tractor, Truck, & Implement Enamel can be clear coated.

A: Hello Neighbor, We would not recommend this product for cleaning a carburetor, as it could damage internal components and degrade seals.

A: For the best results, it is highly recommended to use the Majic Enamel Reducer with other Majic brand paint products.

A: Majic Reducer is a proprietary blend of “exempt” solvents, designed for use with the application of Majic Tractor, Truck & Implement Primers and Enamels. If spraying, we recommend the host product be reduced at an 8:1 ratio (8 parts Majic Tractor & Implement Primer or enamel to 1 part Majic Reducer)… Be sure to apply product in very thin coats, and allow 24 hours to dry between coats (minimum). Too heavy and application and/or re-coating too soon will disrupt the coating’s curing process, and won’t dry “hard” for several days…or longer. *Majic Tractor, Truck & Implement Primers & Enamels are tough & durable, high solids coatings that exhibit excellent adhesion, and corrosion, impact and abrasion resistance. Majic Reducer adds 0 VOC to the host product, allowing it to remain VOC compliant.

A: Please see the links below: Data sheet: https://assets.unilogcorp.com/187/ITEM/DOC/100093251_Datasheet.pdf Specification Sheet: https://assets.unilogcorp.com/187/ITEM/DOC/Majic_Paints_100093251_Specification_Sheet.pdf

A: Majic Tractor, Truck & Implement Enamels are high solids, hard-drying oil/alkyd enamel coatings that demonstrate exceptional adhesion and durability. For brush & roll application we do recommend that the product be reduced between 5-10% with Majic Reducer to (a) improve the film’s “flow & leveling” properties, and (b) to help control the applied thickness of Majic T&I Products. Please read & follow carefully the application instructions printed on the product label (with special attention to the recommended applied thickness (recommended 2.5-3.0 mils wet) and “allowable” recoat times (minimum 24 hours) as too heavy an application, and/or re-coating too soon may result in a film that won’t dry “hard” for several days…or longer. The use of Majic Catalyst Harder is optional, but the benefits that will be realized is a harder film (more resistant to abrasion and impact), and faster film curing.

A: Enamel reducer is specially formulated to provide spray consistency when added to Majic Tractor Truck & Implement Enamels and Primers and Majic Rust Kill Enamel.

A: No, it is recommended that the full 1 pint be added to one gallon of paint.

A: Majic Reducer, #8-0750, is a proprietary blend of “exempt” solvents that mix perfectly with the solvent structure of Majic Tractor, Truck & Implement Coatings, and is most likely compatible with other oil based coatings – it is always best to follow the manufacturer’s specific instructions on reduction, and application, of their own products. Rustoleum Tractor Paint recommends that reduction, for conventional spray, should be up to 15% with Acetone (also an “exempt” solvent), and any solvent other than acetone would not be recommended.

A: While not recommended for use, Mineral Spirits could be used to reduce Majic Tractor, Truck & Implement Primers & Enamels* at approximately the same ratio (8:1), and not interfere with Majic Catalyst Hardener (Majic Catalyst Hardener is an optional additive to T&I products…be sure to read – and follow – all mixing, safety & disposal instructions if/when using Catalyst Hardener). *The recommended reducer for Majic Tractor, Truck & Implement Primers & Enamels is Majic Reducer, #8-0750. Majic Reducer is a proprietary blend of “exempt” solvents that add 0 VOC (Volatile Organic Compounds) to the host product. The addition of VOC containing solvents, such as Mineral Spirits, may render the host product Non-(VOC) Compliant, and cannot be recommended.