Majic 0.34 qt. Cub Cadet Yellow Tractor Truck & Implement Enamel Spray Paint

A: Hi Neighbor! No, Majic Cub Cadet Yellow (often sold as part 8-20955) is designed as a match for OEM Cub Cadet yellow, but it is not an exact 1:1 formulation match for the official OEM Cub Cadet 788S04021. While it is a popular, lower-cost alternative, aftermarket paints may have slight shade or luster variances. OEM Part 788S04021: This is the official "Cub Cadet Yellow 2" 12oz spray paint.

A: Hi Neighbor! Always use a primer whenever possible before working with enamel paint. Paint that is applied without a primer base is more susceptible to running, cracking and flaking.

A: This will match the newer models.

A: Majic Tractor Truck & Implement Enamels are tough & durable industrial alkyd coatings that deliver excellent adhesion, corrosion resistance and resistance to impact and abrasion. That said, active rust should be removed by sanding, grinding, wire-brushed or blasted to clean steel – all exposed, or bare steel surfaces should be primed with Majic Tractor, Truck & Implement Rust-Inhibiting Primer (in either Red Oxide, or Sandable Gray). For best results, tightly adhering rust (that cannot be removed by the above means), should be neutralized, or “converted” with an acid based converter, or appropriate metal pre-treatment solution - before priming. When applying Majic Tractor & Implement Coatings, please read & follow all package directions carefully – with special attention to the recommended applied thickness of coatings (3.0-3.5 mils wet for primers, and 2.6-3.0 mils wet for finish enamels), and to the allowable re-coat time of alkyd products (24 hours minimum) – as to heavy an application, and/or re-coating too soon will result in a film that won’t dry “hard” for several days…or longer.

A: Thank you for this inquiry… Majic Tractor & Implement Cub Cadet Yellow Aerosol, #8-22950, is NOT being discontinued – and is a very popular product, & color… If your local TSC is temporarily out-of-product, please know that this product is still current, and inventories should be replenished very soon. Thank you.

A: It will but you need to prep the fiberglass first and always wear a dust mask and eye protection when dealing with fiberglass. First wash the area clean using a soapy solution of a product like Dawn and warm water the allow to dry. Then scuff it with medium grit sand paper, wipe down it with tack cloth to remove all dust, clean it with a chemical like acetone, prime it with primer made for wood/fiberglass then paint. Allow plenty of time for primer to cure before spraying top coat. Follow the can's directions closely and you should have an acceptable finish.

A: Federal Yellow is what Cub uses....

A: Please call 1-800-451-8346 for MSDS information.

A: This is the only color they have in yellow, for Cub Cadet. It is for the current models. The same is for the white.