Skip to Main Content
MESSAGE

GPI EZ-8 Fuel Pump, 1/10 HP, 3/4 in. Inlet

SKU # 385800499
Product price

Save Up To
See price at checkout Why?
Product Rating is 4.3
4.3
(9)
Write a review

Financing Available! Click here for more details...

Quantity

Autoship

Delivery Options:

Protect Your Purchase

We'll fix it, replace it, or reimburse you for it. Learn More

power plus

Item Information

The GPI EZ-8 Fuel Pump is ideal for on-the-go fueling. The EZ-8 Fuel Pump is designed to safely transfer low viscosity petroleum fuels with a 15 minute on / 30 minute off duty cycle.

  • Material: Heavy Duty Cast Aluminum
  • Voltage Rating: 12-volt DC
  • Flow Rate: Up to 8 gpm/30 lpm
  • PSI Rating: 15 PSI | For use with Gasoline (up to 15% alcohol blends such as E15), diesel fuel (up to 20% bio-diesel blends such as B20) and kerosene
  • 12-volt electric pump delivers 8 GPM (equivalent to standard gas stations)
  • System comes complete with 15 ft. power cord, manual unleaded nozzle, three-piece, trim-to-fit suction pipe and 10 feet of 5/8 inch hose
  • Pump is designed for permanent mounting on vented storage tanks
  • U.L. Listed motor to U.S. and Canadian safety standards
  • 2 year limited warranty

Specification Description
Brand: GPI
Fluid Type: Gasoline, Diesel, and Kerosene
Inlet Port Connection Type: NPT Male
Inlet Port Size: 3/4 in. NPT
Maximum Gallons Per Hour: 480 GPH
Maximum Gallons Per Minute: 8 GPM
Outlet Port Connection Type: NPT Female
Outlet Port Size: 3/4 in.
Product Type: Fuel Pumps
Warranty: 2-Year Limited
Power Type: 12 Volt
Manufacturer Part Number 137100-01
GPI EZ-8 Fuel Pump, 1/10 HP, 3/4 in. Inlet is rated 4.3 out of 5 by 9.
Rated 5 out of 5 by from Fuel pump I bought this pump 3 weeks ago and iam so happy to have it and it works great
Date published: 2018-08-12
Rated 5 out of 5 by from Fuel to pump I bought this needing one because my old pump quit and glad I did. Good price also.
Date published: 2018-07-31
Rated 1 out of 5 by from Not at all impressed Purchased this unit Wednesday of last week, Installed the next day on my 100 gallon auxiliary tank in my pickup. Filled the tank and had pumped roughly 15 gallons when it quit. Checked fuse and connections, finding them good. Disassembled the BRAND NEW PUMP per the instructions in the booklet to test internal connections and the switch. All checked out fine, with the switch providing 12.53vdc to the motor. Motor will not accept the power. As a Hotshot owner/operator, I have very little time to re-do anything. This has so far been a very disappointing purchase.
Date published: 2018-07-21
Rated 5 out of 5 by from Works well so far I purchased this with a 96 gallon tank. Went together very easily. Purchased a tractor battery to run it, seems to work fine. Pumped 15 gallons of fuel in a couple minutes, with no spills, lifting cans, etc. Very happy so far. Using this for a home setup, and it meets my needs.
Date published: 2017-07-17
  • y_2018, m_8, d_18, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_4, tr_5
  • loc_en_US, sid_385800499, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_tractorsupply
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 5ms
  • REVIEWS, PRODUCT

Can this pump be used for water? 

Asked by: Magik1977
Hello, the EZ-8 Fuel pump is designed to be used with Gasoline, Diesel, Gasohol( E10) and Kerosene only. Water will start to attack the aluminum housing and over time not allow it to run properly. Thank you, GPI Team.
Answered by: GPI Inside Sales
Date published: 2018-05-21

Can I purchase a wiring harness for the fuel pump.

Asked by: B211
If you are just looking for the 14 ga x 15' long power cable that goes from the pump to your battery? Yes you can purchase it by itself. It would be part number # 110412-15. if you have any questions please call us at 1-800-835-0113 Thank you, GPI Sales Team.
Answered by: GPI Inside Sales
Date published: 2018-06-08

Can you put an automatic nozzle on this pump

Asked by: Eric12345
No, the reason is the automatic nozzles have to meet UL standards to be "no pressure, no flow". If the pump cannot put enough pressure on the inlet of the nozzle to open the internal valves it will not allow any flow through the outlet of the nozzle. What this does to the EZ-8 pumps ability to transfer fuel is a great reduction in rate of flow due to having to overcome the pressure detection valves in the auto nozzles; if any flow at all.
Answered by: GPI Inside Sales
Date published: 2017-11-14

the tank I have has a 2" inlet does this pump have an adjustable inlet size kit with it or do I need something else to make it fit?

Asked by: calvcon
The EZ-8 pump has a 2" male NPT threaded adaptor to fit the standard 2" adaptor for most tanks and drums. the inlet refers to the size of the suction pipe that goes do into the tank or drum to draw up the fuel. The new EZ-8 pumps now has a 1" inlet with a 1" adjustable suction pipe that can go from 15" to 40" in length. But still has the 2" male NPT tank adaptor. If you have any other questions feel free to contact us at gpisales@gplains.com Thank you.
Answered by: GPI Inside Sales
Date published: 2018-06-02

Can the pump be locked to prevent fuel theft?

Asked by: Lewis78
Hello, the best way to prevent theft is to add alligator clips to the end of you're wires where it attaches to the battery and disconnect the clips when not in use. The EZ-8 does not come with a locking nozzle boot like the rest of our models. Thank you, GPI Sales Team.
Answered by: GPI Inside Sales
Date published: 2018-08-14

How do I prime the GPI EZ-8 fuel pump?

Asked by: DASJ
Hello, The EZ-8 pump is a self priming pump. You should not have to prime it. If you having any issues getting it to prime please call us at 1-800-835-0113 and we would be happy to help out. Thanks, GPI Sales Team.
Answered by: GPI Inside Sales
Date published: 2018-06-29

Is it just the pump or does the nozzle and hose come with it as well?

Asked by: Anonymous
The EZ-8 commonly stocked at TSC comes with a 10ft X 3/4" NPT threaded hose. The kit also includes a 3/4" manual shutoff style nozzle.
Answered by: GPI Inside Sales
Date published: 2017-10-30
  • y_2018, m_8, d_18, h_13CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_385800499, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING)]
  • clientName_tractorsupply
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
Attachments (  1 - 1 of 1  )