Home / Trailers & Towing / Trailer Replacement Parts / Trailer Axles / Carry-On Trailer Round Axle U-Bolt Kit, 1/2 in. x 2-7/16 in., 2-Pack
Carry-On Trailer Round Axle U-Bolt Kit, 1/2 in. x 2-7/16 in., 2-Pack
2.925 Reviews
Item # 17536899
Carry-On Trailer Round Axle U-Bolt Kit, 1/2 in. x 2-7/16 in., 2-Pack
2.925 Reviews
Item # 17536899
$19.99
Available promotions
Buy In Store: at Grassland (franklin) TN
Search Stores
5 In Stock
Pickup at Franklin TN FREE
Select a different store
Neighbor’s Club Members earn points with purchases.
The Carry-On Trailer Round Axle U-Bolt Kit is for use with 2-3/8 in. round tube axles with a 3,500 lb. capacity. The U-bolt kit includes two round shoulder U-bolts, four 1/2 in. flat washers, and four 1/2 in. nylock nuts. The U-bolts measure 1/2 in. x 2-7/16 in. Use the round axle U-bolt kit with the 513T tie plate.
- Dimensions of U-bolts: 1/2 in. x 2-7/16 in.
- Pack of 2 round axle U-bolt kits
- Round axle U-bolt kit includes two round shoulder U-bolts, four 1/2 in. flat washers, and four 1/2 in. nylock nuts
- U-bolt kit fits most 2-3/8 in. round tube axles with a 3,500 lb. capacity
- Use with the 513T tie plate
Similar Items
-
Top Rated
-
Top Rated
-
-
Top Rated
-
-
-
-
-
-
-
-
Items You May Like
-
Top Rated
-
-
-
-
-
-
-
-
-
-
-
Customers Also Bought
-
Top Rated
-
-
Top Rated
-
-
-
-
-
-
-
Top Rated
-
-
Reviews
Most Helpful Favorable Review
5 out of 5 stars.
They fit perfectly
6 years ago
I don'know if the previous reviewers went into their replacement blind or what, but I measured my trailer axles before purchase and bought the T-514 set for our horse trailer with 6k lb axles and they fit perfectly. So don't blame the product or store if you just grab random things off a shelf and assume they fit your application. You need to measure A, B, C, & D (see photo) to know what size you need. The smaller set is for 3, 500k lb or smaller trailers. If you have a 4 horse with 8k lb, these won't fit - you need at least a 3-1/8" inside diameter.
15 people found this helpful
Show Reviews:
Most Helpful Critical Review
1 out of 5 stars.
Buy some flange nuts too...
4 years ago
I can reiterate everything that the other folks have said - too short for me to even get a decent thread into the nylock portion of the nut, and forget the washers. Not happening. I am using these on a #3500 Dexter, single axle. I'm gonna run back and grab some flange nuts. They're lower profile and locking as well. If the trailer dealer was closer I wouldn't even consider buying ANY trailer parts at TS...
7 people found this helpful
Show Reviews:
Customer Images and Videos
1 to 4 of 25 Reviews
1 – 4 of 25 Reviews
Featured
Texas
1 out of 5 stars.
Broke with less than 50 miles
10 months ago
Too short. Only had about a thread and a half past nut. Axle came off springs after about 50 miles.
No, I do not recommend this product.
California, USW
1 out of 5 stars.
Size not as on package!
11 months ago
This and apparently all of the similar items is not sized as on the package. The diagram clearly shows the measurement from end to end as being from outside to outside. It’s more like middle to middle. Three trips to TC to figure this out is very frustrating.
No, I do not recommend this product.
Rochester NY
1 out of 5 stars.
Too short
a year ago
Too short for most applications
4 out of 5 stars.
Pretty expensive for ONE pair
a year ago
You can get twice as many parts online for the same price, but I needed these asap, so I bought them. They were exactly the same size I needed and seem decent quality
Sweepstakes EntryNo