Overall I really like this trailer. Structurally it is made very nice. Good rims and wheels. Fold up gate is solid. The only place it is deficient is in the quality of the wiring workmanship. I know the industry uses T-taps but they are an ultimate point of failure for wiring. T-taps are used throughout the wiring on this trailer. Also, when I inspected the wiring coming out of the tube where it splits out to go to the lights on either side it had been compressed and the plastic jacket on the green and yellow wires had been smashed and the conductors were exposed. Ideally the wiring should be encased in split loom tubing throughout the structure of the trailer to protect it. I replaced all of the wiring and redid it myself, soldering all connections. The ground connection which is screwed to the frame was also done poorly as the powder coating was not scraped to show bare metal. They just zipped the screw in and that was it, this would be another point of failure as corrosion and rust happens.

This is a good trailer but. it as is. If you do not put a 1/2 inch sheet of plywood on the mesh floor, you will quickly break the mesh free from the welds.