Ohio Steel 42 in. Lawn Sweeper, 22 cu. ft. at Tractor Supply Co.
Skip to Main Content

Ohio Steel 42 in. Lawn Sweeper, 22 cu. ft.

SKU # 128494799
Product price

Save Up To
See Price at Check Out
Product Rating is 2.5

Financing Available! Click here for more details...



Delivery Options:

Item Information

This professional-grade Ohio Steel Lawn Sweeper features an extra-large capacity 22 cu. ft. heavy-duty collector bag and a 42 in. sweeping path allowing you to get your lawn care finished quickly. Patented spiral brush sweeps more efficiently than standard sweepers and puts less stress on gears for long service life. "No-slip" positive lock height adjustment has numbered height settings that can be changed while viewing brush for proper adjustment. Hopper bag empties by pulling rope from the seat of your tractor - just reverse to debris or compost area, pull the rope and you're done! Extra wide 9 in. chute is less likely to clog, especially when sweeping damp grass clippings that can clump together. Reversible hitch allows for efficient level operation with any tractor hitch height - without the use of easy to lose spacer rings!

  • 42 in. sweeping width; 22 cu. ft. capacity hopper
  • 11 in. spiraled polypropylene brushes - an Ohio Steel patented exclusive feature
  • Drawbar can be offset left or right for simultaneous sweeping and mowing
  • Drawbar and bag fold for easy storage
  • Assembles in 20 minutes with 1 tool; 70% less hardware to assemble results in 50% faster assembly time
  • 4.5 to 1 brush to wheel turning ratio
  • 11 in. semi-pneumatic wheels
  • Sealed ball bearings on brush axle
  • Gray and black powder-coat finish
  • Hitch pin included
  • 3 year limited warranty

Specification Description
Working Width: 42 in.
Bag Capacity: 22 cu. ft.
Special Feature: Offset sweeping mode; Sweep and mow simultaneously
Brand: Ohio Steel
Compatibility: Fits all lawn tractors equipped with a rear pin receiver hitch
Frame Material: Steel
Brush Length: 42 in.
Product Weight: 84 lb.
Brush Material: Polypropylene
Product Type: Lawn Sweepers
Bag Material: Polyester/Polypropylene
Product Length: 65-3/4 in.
Product Width: 50-1/2 in.
Warranty: 3 Year Limited
Hitch Type: 1/2 in. Pin
Tire Diameter: 11 in.
Product Height: 36-1/2 in.
Manufacturer Part Number 4222V2
Ohio Steel 42 in. Lawn Sweeper, 22 cu. ft. is rated 2.5 out of 5 by 2.
Rated 1 out of 5 by from Adjustment Handle Broke within an Hour Im not sure who came up with the product design, but there is a major flaw with the adjustment handle. I hadn't even been using the sweeper for more than five minutes and I had to stop and check to see why the wheel wasn't moving...the adjustment handle bolt had snapped and the handle was causing the tire to "brake". It's unfortunately really, I was looking forward to actually being able to use this but it doesn't look like I will...I will probably return it.
Date published: 2018-05-24
Rated 4 out of 5 by from Works like expected I bought the sweeper on Mother's day, as a cost effective replacement for a 35+ year old bagging riding mower that finally gave out. It appears to be an improved version of the 42SWP22, which had overall good reviews. It was easy to assemble, and the folding draw bar and center tension tube makes it easy to knock down and store against the wall. The only dings I can give is that the hardware blister pack was labeled with assembly step numbers that did not jibe with the instruction manual, though the sequence was correct. The large decal on the housing had a blister (trapped air). Also, the hopper bag bottom rests/rides on each side of the sweeper housing, which acts as a "knife edge" and will eventually crack the plastic. The housing should have been finished as a flanged lip to spread the load. I placed several layers of duct tape to the housing across the edge to act as a cushion. We'll see what happens. I live on 3 acres surrounded by woods. The ground is like pasture, far from a level suburban lot. I collect the leaves and shred them for mulch. I also collect grass clippings in season for mulch. When I mow, I windrow 3 passes back, then one pass out, with a 54 inch mower deck. This creates a fairly dense covering of clippings. I let them sit for about 24 hours to dry. I set the brush height per instructions, no deeper than 1/2 inch below the tips of the grass. I towed the sweeper at approximately 3 MPH. It picked up 90+% of the clippings in one pass, which suits me just fine. Compared to using a rake and dump cart, the sweeper took 1/4th the time, and no raking! It will be interesting to see how it handles the leaves in the fall. As for maintenance, I plan on using the hour meter on my garden tractor to track operating hours of the sweeper. I intend to periodically inspect the gearing/lubricant to determine the best frequency for cleaning and re-lubrication.
Date published: 2018-05-16
  • y_2018, m_6, d_22, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_128494799, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_tractorsupply
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms

How do you fold it up to store in garage

Asked by: Dick36
The bag easily disconnects from the sweeper with the removal of two pins. Then simply remove the bag tension tube by unscrewing the thumb screw. The bag will now fold down into a nearly flat position. Position bag flat against wall or hang on wall. Move sweeper to wall of garage or shed, pull pin and fold drawbar into storage position.
Answered by: Ohio Steel Product Expert
Date published: 2018-06-09
  • y_2018, m_6, d_22, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_128494799, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING)]
  • clientName_tractorsupply
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
Attachments (  1 - 1 of 1  )