CountyLine 6 ft. x 50 in. Galvanized Mesh Gate
Exclusive
Item # 3602916
Color:
Get everything you need
Neighbor’s Club Members earn points with purchases.
Exclusive
Item # 3602916
Color:
Shopping at
Grassland (franklin) TN
Delivery to
This is a Big & Bulky item.
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Bulk Discount buy 10 get 5% off Each.
Get everything you need
Neighbor’s Club Members earn points with purchases.
Safely Confines Your Small Animals
Keep your small livestock safe and secure. CountyLine Galvanized Wire Mesh Gate is designed to prevent your hogs, goats and sheep from escaping while also protecting them from potential predators.
Provides Easy Access
CountyLine Galvanized Mesh Gate is designed to make it easy for you and your small livestock to get in and out. This wire filled gate is extremely sturdy so you can safely pass through with large equipment. The gate also comes with a chain latch to ensure your animals do not escape.
Avoids Potential Injuries
This 6 ft. utility gate has round corners without sharp edges, and is made of extremely durable and smooth steel that keeps your animals safely enclosed with minimal chance of injury.
When it Comes to Your Animals, We Don't Compromise Quality
CountyLine Galvanized Mesh Gate uses a special galvanized finish that provides ultimate strength and protection to ensure this gate will last for years.Please note all 1-3/4 in. tube gates are 3 in. shorter than listed length to allow for gate hardware and proper clearance
- 50 in. tall
- The added height given the gate by the tubular gate framework makes it an excellent gate for cattle in non-confined areas
- All galvanized construction for long life
- Comes complete with hinges, lag screws and chain latch
- Weight: 28 lbs.
| Brand | CountyLine |
|---|---|
| Country of Origin | Made in USA |
| Primary Material | Galvanized Steel |
| Product Weight | 28 lb. |
| Warranty | Manufacturer Warranty |
| Color | Gray |
| Manufacturer Part Number | WG6 |
Q: What type of posts are used with this gate, wood, metal?
3 months ago- A: This gate is designed and comes with hardware to mount to a wooden post.3 months agoHelpful?
Q: What are the exact dimensions? I was in the store and it measured 68" wide (not the full 6ft) but I forgot to measure the exact height. That should be included on the specs..
10 months ago- A: This gate is approximately 50" in height. All 1-3/4 “tube gates are 3” shorter than listed length to allow for hardware and proper clearance.10 months agoHelpful?
Q: what is the inside diameter of 1 3/4 tubing?
a year ago- A: Approximately 1 1/8"a year agoHelpful?
Q: What gauge wire is the mesh?
a year ago- A: 8-GAUGE WIREa year agoHelpful?
Q: What gauge wire for this fence?
a year ago- A: 8-GAUGE WIREa year agoHelpful?
Q: What is the measurement of this gate?
a year ago- A: The gate is length is 6ft X height 50", weight is 28lbs. Please note all 1-3/4 in. tube gates are 3 in. shorter than listed length to allow for gate hardware and proper clearancea year agoHelpful?
Q: How far apart do t-posts need to be to accommodate this gate with its hardware?
4 years ago- A: 6 ft.4 years agoHelpful?
Q: How do you remove the hinges to move up or down?
4 years ago- A: These are attached with bolt and nut.4 years agoHelpful?
Q: What is the thread of the hinge pin? I'm going to need a nut to fit it.
4 years ago- A: This gate has a screw in hinge pin, and is not designed for a nut.4 years agoHelpful?
Q: What is the thread of the screw?
4 years ago- A: I’m not sure what is being asked here.4 years agoHelpful?
Q&As
Q: What type of posts are used with this gate, wood, metal?
3 months ago- A: This gate is designed and comes with hardware to mount to a wooden post.3 months agoHelpful?
Q: What are the exact dimensions? I was in the store and it measured 68" wide (not the full 6ft) but I forgot to measure the exact height. That should be included on the specs..
10 months ago- A: This gate is approximately 50" in height. All 1-3/4 “tube gates are 3” shorter than listed length to allow for hardware and proper clearance.10 months agoHelpful?
Q: what is the inside diameter of 1 3/4 tubing?
a year ago- A: Approximately 1 1/8"a year agoHelpful?
Q: What gauge wire is the mesh?
a year ago- A: 8-GAUGE WIREa year agoHelpful?
Q: What gauge wire for this fence?
a year ago- A: 8-GAUGE WIREa year agoHelpful?
Q: What is the measurement of this gate?
a year ago- A: The gate is length is 6ft X height 50", weight is 28lbs. Please note all 1-3/4 in. tube gates are 3 in. shorter than listed length to allow for gate hardware and proper clearancea year agoHelpful?
Q: How far apart do t-posts need to be to accommodate this gate with its hardware?
4 years ago- A: 6 ft.4 years agoHelpful?
Q: How do you remove the hinges to move up or down?
4 years ago- A: These are attached with bolt and nut.4 years agoHelpful?
Q: What is the thread of the hinge pin? I'm going to need a nut to fit it.
4 years ago- A: This gate has a screw in hinge pin, and is not designed for a nut.4 years agoHelpful?
Q: What is the thread of the screw?
4 years ago- A: I’m not sure what is being asked here.4 years agoHelpful?
Similar Items
-
-
-
-
-
-
Top Rated
-
Top Rated
-
-
-
-
Top Rated
-
Reviews
- quality
- purchase
- satisfaction
- price
- weight
- sturdy
- small
- size
Yes, I recommend this product.
Great people
Yes, I recommend this product.
Farm gate was exactly what we were looking for.
Yes, I recommend this product.
Comment
Yes, I recommend this product.