$37.99
Harris Farms 2 gal. Double-Wall Poultry Drinker
Harris Farms 2 gal. Double-Wall Poultry Drinker
Item # 2167523
Stocked & Ready
$37.99
Spend $49.99 to unlock free delivery!
Get everything you need
Neighbor’s Club Members earn points with purchases.
$37.99
Spend $49.99 to unlock free delivery!
Shopping at
Grassland (franklin) TN
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
Thanks to its heavy-duty galvanized steel and double-wall construction, this Harris Farms 2 gal. Double Wall Drinker provides a generous supply of cool water to promote intake for up to 51 poultry or game chicks. The constant water level of this double wall drinker is maintained in the pan by a vacuum, so there are no floats to get stuck or replaced. The Harris Farms 2 gal. drinker features a roost-prevention top and comes with a 1 year limited warranty.
- Heavy-duty double wall drinker with visible locking device
- Features a roost-prevention top
- 2 gal. double wall drinker's inner tank has brass valve with rubber sealing washer for positive shutoff
- 11 in. H x 12-1/2 in. diameter
- Harris Farms double wall drinker comes with a 1 year limited warranty
| Brand | Harris Farms |
|---|---|
| Country of Origin | Imported |
| Animal Life Stage | All Life Stages |
| Capacity | 2 gal. |
| Primary Color | Gray |
| Primary Material | Galvanized Steel |
| Product Height | 11 in. |
| Product Length | 12.5 in. |
| Product Weight | 3.6 lb. |
| Product Width | 12.5 in. |
| Warranty | 1 Year Limited |
| Manufacturer Part Number | 1000257 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 13 Questions
Newest questions
Q: I am filling the tank and replacing the top but the water doesn't flow once the trough is empty. Why is this?
8 months ago1 Answer
- A: Hello, thank you for your question. The waterer uses a vacuum system. Water stops flowing if air can’t enter the reservoir. Make sure the reservoir is seated correctly, allow air bubbles, and keep the unit level. For further troubleshooting assistance, please reach out to Harris Farms directly. https://mannapro.com/pages/contact-us8 months agoHelpful?
Q: Is this product frost free or freeze proof
9 months ago1 Answer
- A: No, the Harris Farms Poultry Drinker is not freeze-proof or frost-free on its own. Its heavy-duty, double-wall galvanized steel construction is designed to keep water cool in warm weather, but it does not prevent freezing in cold temperatures. To make it functional in freezing conditions, you must use a compatible heating base.9 months agoHelpful?
Q: I need a replacement rubber washer for this 2 gallon poultry drinker. How do I get one from the manufacturer or this store?
a year ago1 Answer
- A: Hello, thank you for your question. We would recommend reaching out to the manufacturer directly for this replacement part. ***Harris Farms*** https://mannapro.com/pages/contact-usa year agoHelpful?
Q: The description says it has a 1 yr limited warranty. How do I make a claim? I can't find the manufacturer online. Mine broke 6 months after I bought it.
2 years ago1 Answer
- A: Please contact the manufacturer, Manna Pro at https://www.mannapro.com/contact2 years agoHelpful?
Q: This always leaks the water out! What am I doing wrong?? I cant count on them have water for more than BBC a couple hrs.
2 years ago1 Answer
- A: Hi! Per the vendor: The Harris Farms 2 Gallon Double Wall Drinker works on a vacuum seal principle when the base is full, and the lid is properly attached. When filling the fount there may be some water seepage around the valve and base of the pan; this is normal and will be stopped when the outer jacket is replaced. To remove the lid while water is in the unit: Tilt the fount to a 45-degree angle. This will break the air lock. Twist the lid to the left. Slowly lift the lid from the base. For further questions or assistance, please contact us at questions@companapetbrands.com.2 years agoHelpful?
Q: Is the waterer ok to use after it starts rusting?
3 years ago1 Answer
- A: Hi there, A waterer that is starting to rust should be replaced.3 years agoHelpful?
Q: If i put the top outer can all the way down and latch it then only a little water is allowed to come out. I have been unlatching it and push it down until outer can hits the latch pin and then the tray will fill with water. What is the recommended
3 years ago1 Answer
- A: Hi! Per the vendor: The Harris Farms 2 Gallon Double Wall Drinker works on a vacuum seal principle when the base is full, and the lid is properly attached. When filling the fount there may be some water seepage around the valve and base of the pan; this is normal and will be stopped when the outer jacket is replaced. To remove the lid while water is in the unit: Tilt the fount to a 45-degree angle. This will break the air lock. Twist the lid to the left. Slowly lift the lid from the base. For further questions or assistance, please contact us at questions@companapetbrands.com.3 years agoHelpful?
Q: where is this product manufactured?
4 years ago1 Answer
- A: China.4 years agoHelpful?
Q: can these waterers be aluminum painted to help prevent rusting? I know some well water has minerals in it that start rust very fast.
5 years ago1 Answer
- A: Yes, they can be painted.5 years agoHelpful?
Q: The rubber part inside that prevents the water from coming out when the lid is off came off my Drinker. Are there replacement parts available?
5 years ago1 Answer
- A: Thank you for your question! For information on replacement parts, please contact the manufacture directly.5 years agoHelpful?
1 - 10 of 13 Questions
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 13 Questions
Newest questions
Q: I am filling the tank and replacing the top but the water doesn't flow once the trough is empty. Why is this?
8 months ago1 Answer
- A: Hello, thank you for your question. The waterer uses a vacuum system. Water stops flowing if air can’t enter the reservoir. Make sure the reservoir is seated correctly, allow air bubbles, and keep the unit level. For further troubleshooting assistance, please reach out to Harris Farms directly. https://mannapro.com/pages/contact-us8 months agoHelpful?
Q: Is this product frost free or freeze proof
9 months ago1 Answer
- A: No, the Harris Farms Poultry Drinker is not freeze-proof or frost-free on its own. Its heavy-duty, double-wall galvanized steel construction is designed to keep water cool in warm weather, but it does not prevent freezing in cold temperatures. To make it functional in freezing conditions, you must use a compatible heating base.9 months agoHelpful?
Q: I need a replacement rubber washer for this 2 gallon poultry drinker. How do I get one from the manufacturer or this store?
a year ago1 Answer
- A: Hello, thank you for your question. We would recommend reaching out to the manufacturer directly for this replacement part. ***Harris Farms*** https://mannapro.com/pages/contact-usa year agoHelpful?
Q: The description says it has a 1 yr limited warranty. How do I make a claim? I can't find the manufacturer online. Mine broke 6 months after I bought it.
2 years ago1 Answer
- A: Please contact the manufacturer, Manna Pro at https://www.mannapro.com/contact2 years agoHelpful?
Q: This always leaks the water out! What am I doing wrong?? I cant count on them have water for more than BBC a couple hrs.
2 years ago1 Answer
- A: Hi! Per the vendor: The Harris Farms 2 Gallon Double Wall Drinker works on a vacuum seal principle when the base is full, and the lid is properly attached. When filling the fount there may be some water seepage around the valve and base of the pan; this is normal and will be stopped when the outer jacket is replaced. To remove the lid while water is in the unit: Tilt the fount to a 45-degree angle. This will break the air lock. Twist the lid to the left. Slowly lift the lid from the base. For further questions or assistance, please contact us at questions@companapetbrands.com.2 years agoHelpful?
Q: Is the waterer ok to use after it starts rusting?
3 years ago1 Answer
- A: Hi there, A waterer that is starting to rust should be replaced.3 years agoHelpful?
Q: If i put the top outer can all the way down and latch it then only a little water is allowed to come out. I have been unlatching it and push it down until outer can hits the latch pin and then the tray will fill with water. What is the recommended
3 years ago1 Answer
- A: Hi! Per the vendor: The Harris Farms 2 Gallon Double Wall Drinker works on a vacuum seal principle when the base is full, and the lid is properly attached. When filling the fount there may be some water seepage around the valve and base of the pan; this is normal and will be stopped when the outer jacket is replaced. To remove the lid while water is in the unit: Tilt the fount to a 45-degree angle. This will break the air lock. Twist the lid to the left. Slowly lift the lid from the base. For further questions or assistance, please contact us at questions@companapetbrands.com.3 years agoHelpful?
Q: where is this product manufactured?
4 years ago1 Answer
- A: China.4 years agoHelpful?
Q: can these waterers be aluminum painted to help prevent rusting? I know some well water has minerals in it that start rust very fast.
5 years ago1 Answer
- A: Yes, they can be painted.5 years agoHelpful?
Q: The rubber part inside that prevents the water from coming out when the lid is off came off my Drinker. Are there replacement parts available?
5 years ago1 Answer
- A: Thank you for your question! For information on replacement parts, please contact the manufacture directly.5 years agoHelpful?
1 - 10 of 13 Questions
Similar Items
-
-
-
-
Top Rated
-
-
Top Rated
-
-
-
-
-
Top Rated
-
Top Rated
Reviews
Summary of Reviews
The product has significant quality and durability issues, with many customers reporting rapid rusting, deterioration, and problems like loose handles, leaks, and holes developing within a few months of use. While a few found it easy to use for small flocks, the overwhelming sentiment is that this i...
- English
- German
- French
- Spanish
- Portuguese
- Italian
- Korean
- Chinese
- Japanese
- Arabic
Most Helpful Favorable Review
5 out of 5 stars.
Works Great!!! Once you figure it out!!!
9 years ago
Make sure that the base is level - I used a 10 in by 10 inch wood log - (use a small level to make sure it is level) Place the Metal Drinker on the "level log or whatever" and remove the outer metal sleeve.. then fill the tank up with water. Now, the most important part that took me forever to figure out...Re-Install the metal outer sleeve and push it down until it stops/rests on the locking pin (do use the "locking slot") just let any part of the outer sleeve rim rest on the locking pin). When the tank is empty and ready to be refilled you can now use the locking slot to lock the outer sleeve so you can carry the entire empty Drinker to your faucet to be washed and re-filled....hope that helps....Charles
13 people found this helpful
Show Reviews:
Most Helpful Critical Review
1 out of 5 stars.
Rust forms quickly, waterer doesn't last
2 years ago
Very frustrated to see that this waterer is being described by the seller as "long lasting" and "durable," when after only a year or so, mine is all rusted. I've never added anything to my water like acv or anything. I thought mine was a fluke, but the reviews on this site confirm that this is a huge problem. Tractor Supply needs to stop offering this product or the manufacturer needs to make this right.
My heating base is metal and states that it requires a metal waterer, so now I either have to replace everything or get another metal one and wait for it to rust in a year. Very frustrated.
16 people found this helpful
Show Reviews:
- purchase
- quality
- satisfaction
- returns
- small
- large
- cleaning
- design
1 to 4 of 259 Reviews .
1 – 4 of 259 Reviews
Most Recent
Review 1
3 out of 5 stars.
Durable in the AZ Sun
5 days ago
I live in AZ & the sunlight does damage quickly to plastic, therefore my reasoning on purchasing the metal waterer.
It is a good size, 2 gallons. I can lift it easily (I'm old); it is durable in our AZ sun. However! It is very difficult to open; separate the 2 pieces to refill the container. I am thinking about using Vaseline (no harm for my birds) to perhaps make that process easier.
Bakersfield, CA
Review 1
5 out of 5 stars.
Light weight and easy
7 days ago
Light weight, easy to use. The only problem is my chicken keep flinging dirt in the water trough when they scratch around. I placed it up on a block and that has fixed the problem.
Yes, I recommend this product.
Kentucky
Reviews 5
5 out of 5 stars.
Great product
8 days ago
Works as it should. No problems. Highly recommend over others, especially the plastic types.
Yes, I recommend this product.
Review 1
5 out of 5 stars.
Tractor Supply for the WIN!
8 days ago
Needed a metal water can for my chickens. Tired of the plastic ones breaking. Tractor Supply always hours of operation that work with my work schedule were I can make it by after work.