CountyLine 2-Wire, 1/2 HP, 10 GPM Series 4 in. Submersible Pump, 115V at Tractor Supply Co.
Skip to Main Content
MESSAGE

CountyLine 2-Wire, 1/2 HP, 10 GPM Series 4 in. Submersible Pump, 115V

SKU # 102814699
Product price

Save Up To
See Price at Check Out
Why?
Product Rating is 4.0
4.0
(2)

Financing Available! Click here for more details...

Quantity

Protect Your Purchase

If your covered product fails, we fix it, replace it, or reimburse you for it. Learn More

Autoship

Delivery Options:

Item Information

CountyLine 2-Wire, 1/2 HP, 10 GPM Series 4 in. Submersible Pump is ideal for residential water systems and agricultural applications to 150 ft. depth to water or less. Proven floating stack impeller design for sand resistance and reduced sand locking. Heavy-duty stainless steel construction.

  • 1/2 HP
  • Maximum Depth to Water: 150 ft.
  • 150V
  • 4-3/4 in. x 4-3/4 in. x 34 in.
  • 29 lb.
  • Stainless Steel
  • CSA Approved
  • 3-Year Limited Warranty

Tractor Supply is proud to introduce CountyLine, our brand of high quality, competitively priced agricultural products. With a full line of 3-point equipment for your tractor, as well an assortment of sub-compact pieces, our goal is to provide you with the implements you need to get the job done. Designed for durability and superior performance, all CountyLine products come with satisfaction guaranteed.

Specification Description
Volts: 150 V
GPH @ 150 ft.: 2
Body Material: Stainless Steel
Horsepower: 1/2 HP
Product Height: 34 in.
Maximum Depth To Water: 150 ft.
Product Length: 4-3/4 in.
GPH @ 20 ft.: 13.2
Agency Approvals: CSA
Product Type: Well Pumps
GPH @ 100 ft.: 8.1
GPH @ 80 ft.: 9.6
Maximum GPM: 13.2 GPM
GPH @ 40 ft.: 12.2
Brand: CountyLine
GPH @ 60 ft.: 10.9
Product Weight: 29 lb.
Product Width: 4-3/4 in.
Manufacturer Part Number CLA200
CountyLine 2-Wire, 1/2 HP, 10 GPM Series 4 in. Submersible Pump, 115V is rated 4.0 out of 5 by 2.
Rated 5 out of 5 by from Well pump I bought this for a relatively shallow well. Works as intended and was cheap
Date published: 2018-03-19
Rated 3 out of 5 by from Can't say anything bad about the pump. Time will tell. Definitely a heavt unit. The buy online pick up in store option was a pain in the rear. They tried to tell me it wasn't paid for but I couldn't order it without payment being approved.
Date published: 2017-09-03
  • y_2018, m_6, d_18, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_102814699, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_tractorsupply
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 5ms
  • REVIEWS, PRODUCT

Is a replacement motor available for this pump?   Mine is locked up 

Asked by: Ben1982
No we do not offer a replacement motor only. If the unit is still under warranty (which now is 3 years from the purchase date) it can be returned to the store for a replacement. If the pump has been pulled from the well and cleaned well of all sand and lime and still remains locked up it will need to be replaced. You can also call customer service at 1-800-535-4950 for additional technical support
Answered by: ErlindaC
Date published: 2018-05-16

Does this pump require a control box that you purchase separately?

Asked by: Natalie Davis
This model is a two-wire pump and does not require a control box.
Answered by: PHailey
Date published: 2017-08-04

Is this a probable pump

Asked by: 0421
I have emailed you for more information.
Answered by: Valery
Date published: 2017-05-05

I purchased the 115V it has ground and two black wires. How do I know which is hot and neutral? Also what pressure am I going to get?, My pump is only 10' deep. and pumping to pressure tank. Thanks, Chip

Asked by: Haychip
For 115 volt service your incoming power wires can be attached to either of the two black wire leads from the motor, it does not matter which. Your output pressure is a function of resistance and most likely will be controlled by a pressure switch that has a factory set turn on/off range.
Answered by: ErlindaC
Date published: 2018-02-06

Pump has 3 wires.  Two black "hot" and green ground.   If the two hits are reversed will the pump run backwards? We installed it and flow is much less than 10gpm....water lift is less than 10ft and free flowing..... Should we reverse the black wires?   

Asked by: James Texas
This unit can only run one direction changing wires around will not make any difference, on the type of inverter I have no knowledge the unit at start-up will use 1466.25 watts at running it will use 977.5 watts.
Answered by: Valery
Date published: 2017-04-04

What size pipe comes out of pump what size wire need fer pump 

Asked by: J E Ford
The pump has a 1 1/4" discharge pipe. The wire can be 14 gauge (runs up to 104 ft.), 12 gauge (runs up to 165 ft.) or 8 gauge (runs up to 416 ft.).
Answered by: Astroer
Date published: 2016-12-15

Ok, what pressure is pump capable of? I need to be able to charge my tank to 60 + PSI

Asked by: Haychip
The maximum shut off head is 108 PSI. You will need a 40/60 PSI pressure switch.
Answered by: ErlindaC
Date published: 2018-02-07

does this pump require an inline check valve

Asked by: emtycanoe
Model CL A200 does not require an inline check valve.
Answered by: Valery
Date published: 2017-04-13
  • y_2018, m_6, d_18, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_US, sid_102814699, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING)]
  • clientName_tractorsupply
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 4ms
  • QUESTIONS, PRODUCT
Attachments (  1 - 1 of 1  )