In-Line Clip Wire Strainer
In-Line Clip Wire Strainer
Item # 360221799
$7.99
Get everything you need
Neighbor’s Club Members earn points with purchases.
In-Line Clip Wire Strainer
Item # 360221799
$7.99
Shopping at
Grassland (franklin) TN
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
Maintain your fences with the In-Line Clip Wire Strainer. The aluminum alloy ratchet and heavy-duty construction prevents damage to the wire strainer from everyday use and the environment. The convenient design of the fence strainer can be easily installed along any existing fence without cutting the wires.
- Aluminum alloy ratchet in the wire strainer provides ease of wire alignment
- Protrusion design on the ratchet can attach to a pre-strained wire with ease
- Ideal for straining old fence or for tensioning of trellising wire
- Heavily galvanized steel hanger, zinc coating 275 g/m2 (Class 3), and high-tensile, 200 g/m2 m galvanized steel wire clip offers long life
- Fence strainer is compatible with a handle for easy operation
| Brand | Unbranded |
|---|---|
| Country of Origin | Imported |
| Compatible Fencing Type | Wire |
| Finish | Zinc |
| Maximum Compatible Fencing Gauge | 0 N/A |
| Minimum Compatible Fencing Gauge | 0 N/A |
| Package Quantity | 1 |
| Primary Material | Aluminum |
| Product Height | 2.4 in. |
| Product Length | 4.7 in. |
| Product Weight | 0.37 lb. |
| Product Width | 2.3 in. |
| Manufacturer Part Number | 3602217 AP |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 11 Questions
Newest questions
Q: Can this be used on a solid wire without cutting the wire? I don't want to have to cut my current wiring. I know the Strainrite XT1 Wire Strainer will do it, which is to tighten a single strand of wire without cutting it. Will this one do that too? Thx
11 months ago1 Answer
- A: Hi Neighbor! This can be used for this project type. We do not recommend using this with wires thicker than 3.5 mm.11 months agoHelpful?
Q: What strainer handle works with this?
5 years ago1 Answer
- A: For additional support you would need to contact the vendor.5 years agoHelpful?
Q: Can this strainer be used with 3/16" vinyl coated wire?
6 years ago1 Answer
- A: We do not recommend using this with wires thicker than 3.5 mm.6 years agoHelpful?
Q: What gauge wire does it work on?
7 years ago1 Answer
- A: It is advised to be used for wires below 3.0mm. As long as the wire can be put into the hole of the ratchet wheel (dia 5.0mm), you may have a try.7 years agoHelpful?
Q: Can these be used for tensioning electric fence wire?
7 years ago1 Answer
- A: Yes. This product is using for tension of wires on electric fencing.7 years agoHelpful?
Q: What is the maximum tension this strainer can apply to the wire?
7 years ago1 Answer
- A: The maximum tension of this product can be 600kg. Usually, the 2.5mm wire will break first before this poduct breaks down.7 years agoHelpful?
Q: Can this product actually be mounted to a end post to tighten barbed wire?
8 years ago1 Answer
- A: This can not be used to an end post.8 years agoHelpful?
Q: How do you remove the strainer, or does it remain permanently place?
8 years ago1 Answer
- A: It's meant to remain in place to keep the wires tight.8 years agoHelpful?
Q: I understand the binding wire process using this product. But how do you use with barb wire?
9 years ago1 Answer
- A: It will be difficult to use with barbed wire. If you choose to do so, you would have to clip the barbs as they pull through the strainer.9 years agoHelpful?
Q: Is this tool for tightening field fence as it is being installed?
9 years ago1 Answer
- A: This too helps tighten high-tensile wire. You will need to install strainers every 2,000 to 2,500-feet and should be located in the middle of long runs of wire or between two corner posts. Strainers will need to be placed more often when there are corners, bends, dips or rises in the fence.9 years agoHelpful?
1 - 10 of 11 Questions
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 11 Questions
Newest questions
Q: Can this be used on a solid wire without cutting the wire? I don't want to have to cut my current wiring. I know the Strainrite XT1 Wire Strainer will do it, which is to tighten a single strand of wire without cutting it. Will this one do that too? Thx
11 months ago1 Answer
- A: Hi Neighbor! This can be used for this project type. We do not recommend using this with wires thicker than 3.5 mm.11 months agoHelpful?
Q: What strainer handle works with this?
5 years ago1 Answer
- A: For additional support you would need to contact the vendor.5 years agoHelpful?
Q: Can this strainer be used with 3/16" vinyl coated wire?
6 years ago1 Answer
- A: We do not recommend using this with wires thicker than 3.5 mm.6 years agoHelpful?
Q: What gauge wire does it work on?
7 years ago1 Answer
- A: It is advised to be used for wires below 3.0mm. As long as the wire can be put into the hole of the ratchet wheel (dia 5.0mm), you may have a try.7 years agoHelpful?
Q: Can these be used for tensioning electric fence wire?
7 years ago1 Answer
- A: Yes. This product is using for tension of wires on electric fencing.7 years agoHelpful?
Q: What is the maximum tension this strainer can apply to the wire?
7 years ago1 Answer
- A: The maximum tension of this product can be 600kg. Usually, the 2.5mm wire will break first before this poduct breaks down.7 years agoHelpful?
Q: Can this product actually be mounted to a end post to tighten barbed wire?
8 years ago1 Answer
- A: This can not be used to an end post.8 years agoHelpful?
Q: How do you remove the strainer, or does it remain permanently place?
8 years ago1 Answer
- A: It's meant to remain in place to keep the wires tight.8 years agoHelpful?
Q: I understand the binding wire process using this product. But how do you use with barb wire?
9 years ago1 Answer
- A: It will be difficult to use with barbed wire. If you choose to do so, you would have to clip the barbs as they pull through the strainer.9 years agoHelpful?
Q: Is this tool for tightening field fence as it is being installed?
9 years ago1 Answer
- A: This too helps tighten high-tensile wire. You will need to install strainers every 2,000 to 2,500-feet and should be located in the middle of long runs of wire or between two corner posts. Strainers will need to be placed more often when there are corners, bends, dips or rises in the fence.9 years agoHelpful?
1 - 10 of 11 Questions
Similar Items
-
-
-
Top Rated
-
-
Top Rated
-
Top Rated
-
-
-
-
-
-
Top Rated
Items You May Like
-
-
Top Rated
-
-
-
-
-
-
-
Top Rated
-
-
Top Rated
-
Customers Also Bought
-
-
-
-
-
Top Rated
-
Top Rated
-
-
-
-
Top Rated
-
-
Reviews
- application
- design
- durability
- ease of use
- heavy-duty
- opening
- purchase
- quality
1 to 4 of 25 Reviews .
1 – 4 of 25 Reviews
Most Recent
Anonymous
Ipswich, MA
Review 1
5 out of 5 stars.
Wire strainers are better than turnbuckles
2 months ago
I purchased nine gauge high tensile galvanized steel wire, crimps and crimpers, and these strainers. Also posts eye screws. Built a couple of trellises.
I'm really happy the quality of the materials I purchased, and with some support from YouTube, I was able to make exactly what I had envisioned for relatively short money and with excellent structural stability and durability. I've done similar things in the past with turnbuckles, but having good quality crimpers, thicker gauge wire, and strainers I was able to create a much higher quality support.
SweepstakesYes
Yes, I recommend this product.
North Korea
Reviews 2
5 out of 5 stars.
Fingers re-attached
a year ago
Works ok but but I cut off 12 of my fingers trying to use it.
SweepstakesYes
Yes, I recommend this product.
Reviews 9
5 out of 5 stars.
Easy to use
2 years ago
Always use these fencing for our horses. My Shetland pony likes to swap sides of our separated pastures so it’s nice to be able to tighten it every now and then.
2023 Q4 SweepstakesYes
Yes, I recommend this product.
Review 1
1 out of 5 stars.
Flimsy
4 years ago
First off the retention clip will constantly pop out of the holes while tightening. Then the frame will bend back and the spindle will come off. These are poorly designed. If you can tighten your h brace enough before it falls apart it might last. Maybe better for other applications, but I don't reccomend for h brace with thicker guage 9 wire .
No, I do not recommend this product.