$449.99
Weasler 42 in. BYPY 4 Series Metric Driveline
Weasler 42 in. BYPY 4 Series Metric Driveline
Item # 27133499
Stocked & Ready
$449.99
or
or
Get everything you need
Neighbor’s Club Members earn points with purchases.
$449.99
or
or
$38/mo.† suggested payments with 12 Months Financing or earn $22 in Rewards+ on this purchase.
Out of stock at
Grassland (franklin) TN
Delivery to
Pickup Nearby at FRANKLIN TN(6.7) miles FREE
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
The Weasler 42 in. BYPY 4 Series Metric Driveline provides reliable service with durable construction. The convenient design of the drive shaft is a complete assembly for easy installation and maintenance. The driveline is designed for continuous heavy-duty all-purpose use so it can meet the requirements of large farms and contractors.
- BYPY 4 series driveline is a top choice in the agriculture and lawn and turf industries
- PTO drive shaft features a 1-3/8 in., 6 spline quick disconnect tractor connection and a 1-3/8 in. round pin implement connection
- Designed for large farms and contractors
- Design adjustability (cut-to-length) capabilities offer versatility
- Yoke features a cast iron collar and a through-bore to keep debris from collecting inside
- Yoke is interchangeable with other Weasler yokes and most standard yokes (sold separately)
- Easy lock guard system provides full coverage at maximum angles, a full 360 degree friction weld on the guard bell, and black coloring that is durable against ultraviolet light and ozone
- Guard system is cold weather impact rated to -35 degrees C, meets and exceeds all applicable safety standards and ensures a quick and easy process for removal and installation
- Available extended lubrication E-kits reduce downtime with lubrication intervals of 50-250 hours (sold separately)
- High temperature triple lip seal retains grease better
- Cross and bearing kit manufactured with high-quality steel for increased strength, high torque capacity and longer life; standard kits can be upgraded to or interchanged with E-Kits (sold separately)
- Compressed closed length is 33.86 in. while the extended length is 53.88 in. and the extended overall length is 59.92 in.
- Operates at 56 HP/42 kilowatts at 1000RPM or 36 HP/27 kilowatts at 540RPM for efficiency
- Hollow Tri-Lobe female shaft to accommodate your equipment
- Outside diameter of the drive shaft is 6 in. with a weight of 25 lb.
| Brand | Weasler |
|---|---|
| Country of Origin | Made in USA |
| Brand Compatibility | Universal |
| Model Compatibility | Tractors, Implements |
| Package Quantity | 1 |
| Primary Material | Steel |
| Product Height | 6 in. |
| Product Length | 42 in. |
| Product Weight | 25 lb. |
| Product Width | 6 in. |
| Tractor PTO Part Type | Drivelines |
| Manufacturer Part Number | 14006442 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 8 of 8 Questions
Newest questions
Q: The cone or bell on the implement ent is way too long. Can I cut it back safely to match the pto it is replacing?
4 years ago1 Answer
- A: Any modification to the original product will void the warranty. We recommend returning the item for the correct size part.4 years agoHelpful?
Q: Will this work on a 5’ rotary cutter?
4 years ago1 Answer
- A: Here is the reply from the manufacturer: "The 14006442 is a drive shaft we designed around what we have seen used on 6ft rotary cutters that connect to the tractor with a 3pt hitch. Depending on the length of drive shaft your customer needs they will have to determine if they will have to shorten it. The 14006436 is the one we have made up based on those used on 5ft cutters also on 3pt hitches. It just has a different length than the 14006442, that is why we mentioned shortening the 14006442. "4 years agoHelpful?
Q: You mentioned it is rated for 36 hp. does that mean you can not use it on a 65 hp tractor?
5 years ago1 Answer
- A: Correct, you would end up twisting it as you have to much HP for it5 years agoHelpful?
Q: what HP is this shaft rated for?
6 years ago1 Answer
- A: This product is rated for 36 mph.6 years agoHelpful?
Q: How far does this drive shaft extend?
6 years ago1 Answer
- A: This drive shaft will extend to a maximum of 51.97 inches.6 years agoHelpful?
Q: What is the shear bolt hole size?
6 years ago1 Answer
- A: It is 0.50 inches.6 years agoHelpful?
Q: Have bent shaft ,need front half of shaft Weasler # 14006442 Is it possible to get front half of shaft without going overboard, be nice to get a break?
7 years ago1 Answer
- A: It is not sold as a half, the whole thing would need to be ordered according to the manufacturer.7 years agoHelpful?
Q: What size is the pinhole? I'm looking for 1 that has a 3/8" pinhole...........rollpin. From PTO to shaft on Brush hog is about 55" will this work? Thanks
7 years ago1 Answer
- A: On this D/L the yoke is 1 3/8 so this will not work. Weasler does not offer anything with 1 “ bore.7 years agoHelpful?
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 8 of 8 Questions
Newest questions
Q: The cone or bell on the implement ent is way too long. Can I cut it back safely to match the pto it is replacing?
4 years ago1 Answer
- A: Any modification to the original product will void the warranty. We recommend returning the item for the correct size part.4 years agoHelpful?
Q: Will this work on a 5’ rotary cutter?
4 years ago1 Answer
- A: Here is the reply from the manufacturer: "The 14006442 is a drive shaft we designed around what we have seen used on 6ft rotary cutters that connect to the tractor with a 3pt hitch. Depending on the length of drive shaft your customer needs they will have to determine if they will have to shorten it. The 14006436 is the one we have made up based on those used on 5ft cutters also on 3pt hitches. It just has a different length than the 14006442, that is why we mentioned shortening the 14006442. "4 years agoHelpful?
Q: You mentioned it is rated for 36 hp. does that mean you can not use it on a 65 hp tractor?
5 years ago1 Answer
- A: Correct, you would end up twisting it as you have to much HP for it5 years agoHelpful?
Q: what HP is this shaft rated for?
6 years ago1 Answer
- A: This product is rated for 36 mph.6 years agoHelpful?
Q: How far does this drive shaft extend?
6 years ago1 Answer
- A: This drive shaft will extend to a maximum of 51.97 inches.6 years agoHelpful?
Q: What is the shear bolt hole size?
6 years ago1 Answer
- A: It is 0.50 inches.6 years agoHelpful?
Q: Have bent shaft ,need front half of shaft Weasler # 14006442 Is it possible to get front half of shaft without going overboard, be nice to get a break?
7 years ago1 Answer
- A: It is not sold as a half, the whole thing would need to be ordered according to the manufacturer.7 years agoHelpful?
Q: What size is the pinhole? I'm looking for 1 that has a 3/8" pinhole...........rollpin. From PTO to shaft on Brush hog is about 55" will this work? Thanks
7 years ago1 Answer
- A: On this D/L the yoke is 1 3/8 so this will not work. Weasler does not offer anything with 1 “ bore.7 years agoHelpful?
Similar Items
Items You May Like
Customers Also Bought
-
-
-
-
-
-
-
-
Top Rated
-
-
-
-
Reviews
Summary of Reviews
The PTO shaft is reported to be high-quality, durable, and a perfect fit for various farm equipment like bush hogs and rototillers. Many customers praise its strength, security, and added features like an external clutch plate and shear bolt for extra protection. The shaft is easy to install and wor...
- English
- German
- French
- Spanish
- Portuguese
- Italian
- Korean
- Chinese
- Japanese
- Arabic
- purchase
- price
- quality
- driving
- satisfaction
- installation
- functional
- connections
1 to 4 of 170 Reviews .
1 – 4 of 170 Reviews
Most Recent
Eugene Oregon
Reviews 2
5 out of 5 stars.
Perfect fit
a year ago
This driveline is a replacement for my post hole digger. It fit perfectly and I was able to finish my job.
Yes, I recommend this product.
Ky
Review 1
4 out of 5 stars.
Had to have it
a year ago
Expensive but needed it
SweepstakesYes
Yes, I recommend this product.
Review 1
1 out of 5 stars.
Returned with no hassle!
a year ago
It did not work
No, I do not recommend this product.
Kinsman OH
Reviews 3
5 out of 5 stars.
Weasler
a year ago
Fits and works well on my Tarter brushhog
SweepstakesYes
Yes, I recommend this product.