Weasler 40 in. BYPY 3 Series Metric Driveline
Weasler 40 in. BYPY 3 Series Metric Driveline
Item # 27132699
Neighbor’s Club Members earn points with purchases.
The Weasler 40 in. BYPY 3 Series Metric Driveline provides reliable service with durable construction. The convenient design of the drive shaft is a complete assembly for easy installation and maintenance. The driveline is designed for continuous heavy-duty all-purpose use so it can meet the requirements of large farms and contractors.
- BYPY 3 series driveline is a top choice in the agriculture and lawn and turf industries
- Features a 1-3/8 in., 6 spline quick disconnect connection on both ends for ease of use
- Designed for large farms and contractors
- Design adjustability (cut-to-length) capabilities offer versatility
- Features a cast iron collar and a through-bore to keep debris from collecting inside
- Interchangeable with other Weasler yokes and most standard yokes (sold separately)
- Easy lock guard system provides full coverage at maximum angles, a full 360 degree friction weld on the guard bell, and black coloring that is durable against ultraviolet light and ozone
- Guard system is cold weather impact rated to -35 degrees C, meets and exceeds all applicable safety standards and ensures a quick and easy process for removal and installation
- Available extended lubrication E-kits reduce downtime with lubrication intervals of 50-250 hours (sold separately)
- High temperature triple lip seal retains grease better
- Cross and bearing kit manufactured with high-quality steel for increased strength, high torque capacity and longer life; standard kits can be upgraded to or interchanged with E-Kits (sold separately)
- Extended length is 48.94 in. and the extended overall length is 56.98 in.
- Operates at 44 HP/33 kilowatts at 1000RPM or 29 HP/22 kilowatts at 540RPM for efficiency
- Hollow Tri-Lobe female shaft to accommodate your equipment
- Outside diameter of the drive shaft is 6 in. with a weight of 22 lb.
- Weight: 22 lb./10 kilograms
| Brand | Weasler |
|---|---|
| Country of Origin | Made in USA |
| Brand Compatibility | Universal |
| Model Compatibility | Tractors, Implements |
| Package Quantity | 1 |
| Primary Material | Steel |
| Product Height | 6 in. |
| Product Length | 40 in. |
| Product Weight | 22 lb. |
| Product Width | 6 in. |
| Tractor PTO Part Type | Drivelines |
| Manufacturer Part Number | 14006340 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 8 of 8 Questions
Newest questions
Q: Do have the slip clutch to fit this
9 days ago1 Answer
- A: Hi Jbyr! Yes, you can use a slip clutch with the Weasler BYPY Series 3 metric driveline, typically installed on the implement end. Compatible friction clutches like the Weasler Universal Friction Clutch are designed to match these standard metric shafts.8 days agoHelpful?
Q: Will this work for a county line 6ft rotary cutter?
4 months ago1 Answer
- A: Hi Farmerbrown123! This is a universal product. We encourage speaking with the manufacturer to ensure this would be a suitable option.4 months agoHelpful?
Q: u joint replacement number
a year ago1 Answer
- A: Hi chris for replacement part numbers, please contact the manufacturer at 262-338-2161.a year agoHelpful?
Q: Pto shaft to fit a 709 John Deere mower, would you have one that fits?
4 years ago1 Answer
- A: For additional product support, please contact your local TSC store.4 years agoHelpful?
Q: Will this fit a John Deere 525 moco disc mower?
4 years ago1 Answer
- A: Unfortunately we do not have the specifications of your mower needed to answer this question. Please contact the manufacturer at 262-338-2161.4 years agoHelpful?
Q: Can it be cut?
5 years ago1 Answer
- A: Design adjustability (cut-to-length) capabilities offer versatility.5 years agoHelpful?
Q: Will this shaft fit a 1952 Ford 8N?
5 years ago1 Answer
- A: Please see the manufacturer's response as follows. The 14006340 is meant to hook between the tractor and the implement. If your customer is looking to fit this into the tractor, it is a good bet that it will not work. As far as connecting to the tractor’s pto, this has a 1.38-6 spline tractor yoke and tractors like the old Ford 8N are only 540 rpms and would have the 1.38-6 spline pto. Your customer then needs to check what the connection on the implement is and if the length of this drive shaft is short or long enough.5 years agoHelpful?
Q: What is the extended length?
7 years ago1 Answer
- A: The max length is 56”.7 years agoHelpful?
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 8 of 8 Questions
Newest questions
Q: Do have the slip clutch to fit this
9 days ago1 Answer
- A: Hi Jbyr! Yes, you can use a slip clutch with the Weasler BYPY Series 3 metric driveline, typically installed on the implement end. Compatible friction clutches like the Weasler Universal Friction Clutch are designed to match these standard metric shafts.8 days agoHelpful?
Q: Will this work for a county line 6ft rotary cutter?
4 months ago1 Answer
- A: Hi Farmerbrown123! This is a universal product. We encourage speaking with the manufacturer to ensure this would be a suitable option.4 months agoHelpful?
Q: u joint replacement number
a year ago1 Answer
- A: Hi chris for replacement part numbers, please contact the manufacturer at 262-338-2161.a year agoHelpful?
Q: Pto shaft to fit a 709 John Deere mower, would you have one that fits?
4 years ago1 Answer
- A: For additional product support, please contact your local TSC store.4 years agoHelpful?
Q: Will this fit a John Deere 525 moco disc mower?
4 years ago1 Answer
- A: Unfortunately we do not have the specifications of your mower needed to answer this question. Please contact the manufacturer at 262-338-2161.4 years agoHelpful?
Q: Can it be cut?
5 years ago1 Answer
- A: Design adjustability (cut-to-length) capabilities offer versatility.5 years agoHelpful?
Q: Will this shaft fit a 1952 Ford 8N?
5 years ago1 Answer
- A: Please see the manufacturer's response as follows. The 14006340 is meant to hook between the tractor and the implement. If your customer is looking to fit this into the tractor, it is a good bet that it will not work. As far as connecting to the tractor’s pto, this has a 1.38-6 spline tractor yoke and tractors like the old Ford 8N are only 540 rpms and would have the 1.38-6 spline pto. Your customer then needs to check what the connection on the implement is and if the length of this drive shaft is short or long enough.5 years agoHelpful?
Q: What is the extended length?
7 years ago1 Answer
- A: The max length is 56”.7 years agoHelpful?
Similar Items
Items You May Like
Customers Also Bought
Reviews
- quality
- purchase
- price
- connections
- size
- protection
- instructions
- installation
1 to 4 of 124 Reviews .
1 – 4 of 124 Reviews
Most Recent
Review 1
5 out of 5 stars.
Drive line p t o shaft
a year ago
Called the store little kid didn’t know what he was talking about said they didn’t have one went to Atwoods got a defefected one took it back went to tractor supply in person found the one I needed works great been mowing mountain s for 2 weeks now
SweepstakesYes
Yes, I recommend this product.
Elmwood, TN
Reviews 4
5 out of 5 stars.
I needed a longer power takeoff shaft.
2 years ago
I needed a longer power takeoff shaft. Tractor Supply had the correct one in stock for me.
SweepstakesYes
Booneville. MS
Review 1
4 out of 5 stars.
PTO SHAFT
2 years ago
Works as it should
Yes, I recommend this product.
Anonymous
Hatchachubbee, Alabama
Review 1
5 out of 5 stars.
Driveshaft replacement
2 years ago
Perfect replacement for my brush cutter
2023 Sweepstakes EntryYes
Yes, I recommend this product.