Norwesco Water Storage Tank, 550 gal. at Tractor Supply Co.
Skip to Main Content
MESSAGE

Norwesco Water Storage Tank, 550 gal.

SKU # 212693399
Product price

Save Up To
See Price in Store
Why?
No ratings found

Financing Available! Click here for more details...

Quantity

Delivery Options:

Item Information

This Water Storage Tank is constructed of corrosion-resistant polyethylene.

  • Black pigmented
  • 44 in. tall
  • 67 in. diameter
  • 94 lb.
  • Designed for above ground use only
  • For water storage only
  • Safe for drinking water
  • Black storage tanks are available by special order in Texas, Oklahoma, New York and California stores only

Specification Description
Brand: Norwesco
Product Type: Water Storage Tanks
Diameter: 67 in.
Tank Capacity: 550 gal.
Manufacturer Part Number 40703

How thick is the wall of the tank?

Asked by: MFerg
The most specific we can be on an answer for this would be “not less than 1/4 inch”, however much more detail is truly required for this answer.The wall thickness varies from top to bottom on the tank and so it is not the best gauge for determining the quality of a tank. The very bottom of the tank is the thinnest part and is made that way to flex when the tank is empty or full. Generally, the wall becomes thicker as you go from the top to the bottom of a vertical tank such as this. This is done to increase resistance to head pressure created by the height of the liquid in the tank. The radius of the tank is thicker to increase strength where it is most critical. Norwesco produces three grades of polyethylene tanks - premium, heavy duty and water(this tank). The Norwesco water tank is designed and manufactured to hold product with a specific gravity up to 1.1 (9.2lbs per gallon) at 73 degrees F. (An increase in liquid temperature will substantially decrease the specific gravity rating.)
Answered by: DanielB
Date published: 2018-03-25

What is the thread type on the upper 1.5" bulkhead fitting? It does not appear to be NPT.

Asked by: Jones77
The threading is NPT.
Answered by: DanielB
Date published: 2017-08-02

Is there a drain on the outside to drain off water? This would work great to use for rain water collection for hot tub water.

Asked by: shopop
The tank has a 2” bottom fitting and a 1.5” top fitting.
Answered by: DanielB
Date published: 2017-08-02

How is the container keeping the potable water "safe" inside during for example summer heat. Does it contain multi-layer resins capable of protecting the water inside from outside environment and to keep contents "fresh" inside?

Asked by: Stefan13
Hi Stefan, Norwesco's water tanks are made with UV stabilized resins approved by the FDA for safe storage of potable water. Our water tanks are black in color which impedes the amount of sunlight penetrating the tank and thereby reducing the potential for algae growth. While not always possible, keeping your tank sheltered or indoors will prolong its life. Feel free to call with any questions. Bob 952-446-8807
Answered by: Product Expert
Date published: 2018-04-16

Will this fit in my 8' bed of my pickup, when I buy it to bring it home?

Asked by: steven139
Hi Steven, The tank is 67" D x 44" H. You'll need to measure the width of your bed to determine if you can haul it. Thanks, Bob 952-446-8807
Answered by: Product Expert
Date published: 2018-05-09

Can this tank be put on a 2 ton flatbed truck to be filled and used with a submersible pump to get water?

Asked by: Mike1985
It can definitely be used with a pump. Whether or not it will fit on your truck depends on the size of the bed. The dimensions for this tank are as follows: 67" diameter x 44"H. If you do choose to have it in your truck, you will need to make sure to strap it down. The trick is to make sure the tank is "snug". Any tighter and it could cause structural damage to the tank.
Answered by: DanielB
Date published: 2017-08-29

Where were these tanks (550 gal.specifically) made and what is the warranty on them? Also what is the recommended connection to this tank from a small rain gutter?

Asked by: FortWalls
This tank is made in WA, CA, UT, OK, TX, GA and NY. All Norwesco WATER ONLY (black or dark green) and PREMIUM (white) tanks have a 3 year warranty against manufacturers defect based on the date of manufacture which goes off of the 9 digit serial number stamped into the plastic of the tank. This tank has a 16 lid (SKU 2125000 as a replacement). Numerous people have bought a second lid and modified it to work with their down spouts, or just modified the lid that came with the tank. We do not make any recommendations on how to set up this type of system.
Answered by: DanielB
Date published: 2017-01-05

Is this tank suitable for intermediate storage in a residence with a well system in place? Can it be pressurized?

Asked by: windhorse
Hello Windhorse, Our tanks cannot be pressurized and must be vented to atmosphere. We need more detail about your intermediate storage schematic to provide consultation. Feel free to call me directly. Thanks, Bob 952-446-8807
Answered by: Product Expert
Date published: 2018-06-13
  • y_2018, m_6, d_17, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_17
  • loc_en_US, sid_212693399, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING)]
  • clientName_tractorsupply
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 5ms
  • QUESTIONS, PRODUCT
Attachments (  1 - 1 of 1  )