Chief 1.5 in. Bore x 16 in. Stroke LD Loader Welded Cylinder, 1 in. Rod Diameter
$139.99
Chief 1.5 in. Bore x 16 in. Stroke LD Loader Welded Cylinder, 1 in. Rod Diameter
Online Only
Chief 1.5 in. Bore x 16 in. Stroke LD Loader Welded Cylinder, 1 in. Rod Diameter
Item # 1307783
$139.99
Get everything you need
Neighbor’s Club Members earn points with purchases.
Online Only
Chief 1.5 in. Bore x 16 in. Stroke LD Loader Welded Cylinder, 1 in. Rod Diameter
Item # 1307783
$139.99
New Cardmembers earn a $20 Reward‡ with qualifying purchase of $20 or more plus earn 5% in Rewards+ on this purchase. Valid through 8/9/26.
This item is available online only
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
Looking for small bore hydraulic cylinders? The Chief 1.5 in. Bore x 16 in. Stroke LD Loader Welded Cylinder is a double acting hydraulic cylinder that's designed for light-duty loaders. The welded hydraulic cylinder's ductile iron piston utilizes a wear ring to protect the seal from wear. You can trust its quality because the cylinder has been functionally tested and pressurized to 1.5 times the normal working pressure to ensure performance reliability.Note: This product may require up to 2 additional days for order processing prior to shipping
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
Looking for more information on hydraulics? Check out our guide on hydraulics in the product documents section.
- Ideal for construction, agricultural and other applications and a great replacement welded hydraulic cylinder
- Intended for use as a double acting hydraulic cylinder
- Piston: ductile iron
- Gland: ductile iron
- Tube: honed steel
- Rod: hard chrome-plated
- End mounts: cross-tubes
- Tube seal: Buna O-ring with polytemp hytrel back-up
- Rod seal: polyurethane U-cup
- Rod wiper: polyurethane, snap-in
- Piston seal: 755 with wear rings, (2 each) wear bearings
- All seals are manufactured to US specifications
- Ports: SAE O-rings
- Paint: black; custom colors are available
- Packaging: individually poly bagged welded hydraulic cylinders
- Pin diameter of 0.75 in. and rod diameter of 1 in.
- 3,000 PSI operating range
- Small bore hydraulic cylinder measures 24 in. retracted and 40 in. extended
- Column load: 5,300 lb.
- 3 year warranty
| Brand | Chief |
|---|---|
| Country of Origin | Imported |
| Bore Diameter | 1.5 in. |
| Brand Compatibility | Universal |
| Compatibility | Varies |
| Cylinder Size | 0 N/A |
| Extended Length | 40 in. |
| Hydraulic Cylinder Type | Welded |
| Maximum Operating Pressure | 3,000 PSI |
| Maximum Weight Capacity | 5,300 lb. |
| Model Compatibility | Most applications |
| Package Quantity | 1 |
| Pin Diameter | 0.75 in. |
| Port Size | SAE 6 |
| Primary Material | Steel |
| Product Height | 2.69 in. |
| Product Length | 8 in. |
| Product Weight | 12.13 lb. |
| Product Width | 2 in. |
| Retracted Length | 24 in. |
| Rod Diameter | 1 in. |
| Single/Double Acting | Double acting |
| Stroke Distance | 16 in. |
| Warranty | 3 Year |
| Manufacturer Part Number | 288602 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 11 Questions
Newest questions
Q: How wide are the ends where the pins go threw
a month ago1 Answer
- A: The pin size for this cylinder is 0.75 inches.a month agoHelpful?
Q: Will this cylinder fit on John deere 410 loader
3 months ago2 Answers
- A: We are unable to confidently say whether this cylinder would be a good drop-in fit for your John Deere. If you would like to call into our support center we would be happy to get more info and guide you on a good fit. 800-800-1810 8:00 am - 5:30 pm EST, Monday-Friday3 months agoHelpful?
Q: If the pin dimension is .75 dia., what is the width of the end mounts.
4 months ago1 Answer
- A: Hi, for the Chief 1.5 in. Bore x 16 in. Stroke LD Loader Welded Cylinder (288602), the width of the cross-tube end mounts is 2 inches.4 months agoHelpful?
Q: Do you support rebuild kits in the event of failure
a year ago1 Answer
- A: I am sorry. We do not have any rebuild components for this particular cylinder available online.a year agoHelpful?
Q: Looking at the spec's, how can the product height be only 1" when the bore diameter is 1.5 inch plus the port How can the product length be 8" when the retracted length is 24"? Also, how can the rod diameter be 2" hen the bore diameter is 1.5"?
a year ago1 Answer
- A: We apologize for the confusion. We are correcting the specs on this item. Below are the correct specs: Height: 2.69 in (tube width + port height) Length: We do not register the overall length of cylinders. We measure cross-tube center to cross-tube center. For this cylinder that is 24 in (retracted). Rod Dia.: 1 ina year agoHelpful?
Q: I'm replacing the pistons on my boat lift the old cylinders had one 1 fitting with a power up and down can this cylinder work if I plumb it off both hoses on each side?
3 years ago1 Answer
- A: For the best solution to your problem, and for the best part for the job, we suggest reaching out to the manufacturer: 1-800-800-1810 Sales and Service phone hours are 8:00 am - 5:30 pm EST, Monday-Friday, excluding major US holidays.3 years agoHelpful?
Q: What’s the width of the live end and dead end? Where the pin hooks up?
3 years ago1 Answer
- A: Please see the Specs or the provided brochure for all of the sizes that have been provided by the manufacturer.3 years agoHelpful?
Q: What thread type and size is used for the tube connections to the body of the cylinder.
4 years ago1 Answer
- A: For additional product support, please contact the manufacture.4 years agoHelpful?
Q: What is the weight rating for this cylinder?
4 years ago1 Answer
- A: Max. Push Capacity: 5300 lbs4 years agoHelpful?
Q: Retracted length? Extended Length? Width of pin brackets
5 years ago1 Answer
- A: Retracted length 24”, Extended length 40”, Rod mount width 2”, Base end mount 2”5 years agoHelpful?
1 - 10 of 11 Questions
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 11 Questions
Newest questions
Q: How wide are the ends where the pins go threw
a month ago1 Answer
- A: The pin size for this cylinder is 0.75 inches.a month agoHelpful?
Q: Will this cylinder fit on John deere 410 loader
3 months ago2 Answers
- A: We are unable to confidently say whether this cylinder would be a good drop-in fit for your John Deere. If you would like to call into our support center we would be happy to get more info and guide you on a good fit. 800-800-1810 8:00 am - 5:30 pm EST, Monday-Friday3 months agoHelpful?
Q: If the pin dimension is .75 dia., what is the width of the end mounts.
4 months ago1 Answer
- A: Hi, for the Chief 1.5 in. Bore x 16 in. Stroke LD Loader Welded Cylinder (288602), the width of the cross-tube end mounts is 2 inches.4 months agoHelpful?
Q: Do you support rebuild kits in the event of failure
a year ago1 Answer
- A: I am sorry. We do not have any rebuild components for this particular cylinder available online.a year agoHelpful?
Q: Looking at the spec's, how can the product height be only 1" when the bore diameter is 1.5 inch plus the port How can the product length be 8" when the retracted length is 24"? Also, how can the rod diameter be 2" hen the bore diameter is 1.5"?
a year ago1 Answer
- A: We apologize for the confusion. We are correcting the specs on this item. Below are the correct specs: Height: 2.69 in (tube width + port height) Length: We do not register the overall length of cylinders. We measure cross-tube center to cross-tube center. For this cylinder that is 24 in (retracted). Rod Dia.: 1 ina year agoHelpful?
Q: I'm replacing the pistons on my boat lift the old cylinders had one 1 fitting with a power up and down can this cylinder work if I plumb it off both hoses on each side?
3 years ago1 Answer
- A: For the best solution to your problem, and for the best part for the job, we suggest reaching out to the manufacturer: 1-800-800-1810 Sales and Service phone hours are 8:00 am - 5:30 pm EST, Monday-Friday, excluding major US holidays.3 years agoHelpful?
Q: What’s the width of the live end and dead end? Where the pin hooks up?
3 years ago1 Answer
- A: Please see the Specs or the provided brochure for all of the sizes that have been provided by the manufacturer.3 years agoHelpful?
Q: What thread type and size is used for the tube connections to the body of the cylinder.
4 years ago1 Answer
- A: For additional product support, please contact the manufacture.4 years agoHelpful?
Q: What is the weight rating for this cylinder?
4 years ago1 Answer
- A: Max. Push Capacity: 5300 lbs4 years agoHelpful?
Q: Retracted length? Extended Length? Width of pin brackets
5 years ago1 Answer
- A: Retracted length 24”, Extended length 40”, Rod mount width 2”, Base end mount 2”5 years agoHelpful?
1 - 10 of 11 Questions
Similar Items
-
-
-
-
Top Rated
-
Top Rated
-
Top Rated
-
Top Rated
-
-
Top Rated
-
Top Rated
-
-
Reviews
- price
- purchase
- performance
- information
- warranty
- small
- installation
1 to 4 of 17 Reviews .
1 – 4 of 17 Reviews
Most Recent
Nashville
Reviews 2
4 out of 5 stars.
Works good for my Kubota B1750
7 months ago
I had to force it in a bit with the hammer but works good. It seems to be a little more jerky than my original but still performs adequately.
SweepstakesYes
Yes, I recommend this product.
Sawyer mi
Review 1
5 out of 5 stars.
description
a year ago
Fit perfect description
SweepstakesYes
Yes, I recommend this product.
PA
Review 1
5 out of 5 stars.
Good cylinder for the price
a year ago
Cylinders were installed on a front end loader and have been working fine. I would buy this brand again if I need any new cylinders.
Yes, I recommend this product.
Atlanta, Ga
Review 1
3 out of 5 stars.
Bucket cylinders
a year ago
Fit perfectly on my Kabota bucket loader
Yes, I recommend this product.