Water Source Well Point Drive Cap, 2 in.
2.73 Reviews
Item # 1028084
$24.99
Neighbor’s Club Members earn points with purchases.
$24.99
Shopping at
Grassland (franklin) TN
Delivering to
37027
Pickup Nearby at FAIRVIEW TN(13.2) miles Free
Pickup Later at Franklin TN
Neighbor’s Club Members earn points with purchases.
This Water Source Well Point Drive Cap protects points and drive pipe threads while driving a well point into the ground. A small vent hole in the top of the casting relieves pressure during driving operations and can be used as a guide for a driving tool. The well drive cap is constructed of cast iron.
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
- Protects well point and drive pipe threads while driving a well point into the ground
- A small vent hole in the top of the well point drive cap relieves pressure during driving operations and can be used as a guide for a driving tool
- For extra protection to the pipe threads, attach well drive cap to a 6 in. pipe nipple, and connect nipple to the well point or drive pipe using a drive coupling
- Can be driven with a sledge hammer or post driver
- Constructed from cast iron
Similar Items
-
-
-
Top Rated
-
Top Rated
-
Top Rated
-
-
Top Rated
-
Top Rated
-
-
Top Rated
-
-
Items You May Like
-
-
Top Rated
-
-
-
-
Top Rated
-
-
-
-
Top Rated
-
Top Rated
-
Customers Also Bought
-
-
Top Rated
-
Top Rated
-
-
Top Rated
-
-
-
Top Rated
-
Top Rated
-
-
-
Reviews
Most Helpful Favorable Review
5 out of 5 stars.
Cast iron cap , must turn while pounding
4 years ago
I have ruined two of these by not keeping up with turning the cap every five poundings. You also must use teflon tape evenly. I am going to try a stainless steel 4 inch nipple next as the cap thread deform then the end of the pipe peals back inward and gets the cap stuck so it can't be removed. On the first cap I did manage to get it off and saw the threads that failed were at the skirt of the cap, not deep inside. Even when the pipe threads fail, you can still pound with the eight pound sledge hammer but it does not make the same progress as the cap is loose and a positive hammer hit is not happening, you get a partial hit. Good product, but learn how it works.
3 people found this helpful
Show Reviews:
Most Helpful Critical Review
1 out of 5 stars.
Broke easily
9 years ago
I bought this to drive a well in my barn, you are supposed to be able to drive it with a sledge hammer but it failed after only driving 3ft of pipe . the whole top broke out . I finished the job with a regular Steel pipe cap
9 people found this helpful
Show Reviews:
Customer Images and Videos
- finish
- purchase
- quality
- turning
1 to 3 of 3 Reviews
1 – 3 of 3 Reviews
Featured
Willet, NY
Review 1
2 out of 5 stars.
not sure about the quality
a year ago
have purchased two, the first held up well, and was a mistake on our part, the second had less than 10 hits and cracked apart, the top came off
No, I do not recommend this product.
Boise, Idaho Boise Canal, Glenwood Street
Review 1
5 out of 5 stars.
Cast iron cap , must turn while pounding
4 years ago
I have ruined two of these by not keeping up with turning the cap every five poundings. You also must use teflon tape evenly. I am going to try a stainless steel 4 inch nipple next as the cap thread deform then the end of the pipe peals back inward and gets the cap stuck so it can't be removed. On the first cap I did manage to get it off and saw the threads that failed were at the skirt of the cap, not deep inside. Even when the pipe threads fail, you can still pound with the eight pound sledge hammer but it does not make the same progress as the cap is loose and a positive hammer hit is not happening, you get a partial hit. Good product, but learn how it works.
Yes, I recommend this product.
Review 1
1 out of 5 stars.
Broke easily
9 years ago
I bought this to drive a well in my barn, you are supposed to be able to drive it with a sledge hammer but it failed after only driving 3ft of pipe . the whole top broke out . I finished the job with a regular Steel pipe cap
No, I do not recommend this product.