Senix CSP4QL-L 8 in. 26.5cc Gas Pole Saw
Senix CSP4QL-L 8 in. 26.5cc Gas Pole Saw
Item # 161271199
$166.99
Add this item to unlock free delivery!
Notice:
This Item cannot be shipped to CA.Add a protection plan
Powersport plans are not available in CA & MD.
Neighbor’s Club Members earn points with purchases.
$166.99
New Cardmembers earn a $20 Reward‡ with qualifying purchase of $20 or more plus earn 5% in Rewards+ on this purchase. Valid through 8/9/26.
Add this item to unlock free delivery!
This item is available online only
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Notice:
This Item cannot be shipped to CA.Add a protection plan
Powersport plans are not available in CA & MD.
Neighbor’s Club Members earn points with purchases.
Cut high branches with confidence without the hassle of mixing fuel. The SENIX CSP4QL-L 26.5cc 4QL Gas Pole Saw delivers reliable gas performance in a lightweight design built for homeowners and property owners who need extended reach and clean cutting power.
The 26.5cc 4QL 4-cycle engine runs smoother and cleaner than traditional 2-cycle models while eliminating the need to mix gas and oil. Paired with an 8 inch Oregon bar and chain with automatic oiler, this pole saw delivers precise, consistent cuts through overhead limbs and routine tree maintenance.
An included extension pole provides up to 15 feet of reach, helping you safely tackle high branches while keeping your feet on the ground. The shoulder strap and balanced design improve stability and reduce fatigue during extended use.
Ideal for property maintenance, storm cleanup, and seasonal pruning, the CSP4QL-L is backed by a 3-year limited warranty for added peace of mind.
Backed by SENIX Confidence: Covered by a 2 year limited warranty for long-term reliability and peace of mind.
- Extended Reach for High Branches: Included extension pole provides up to 15 feet of reach, making it easier to trim overhead limbs without climbing.
- Oregon 8 Inch Bar and Chain: Low kickback Oregon bar and chain delivers clean, controlled cuts through branches up to 8 inches thick.
- 26.5cc 4QL 4-Cycle Engine: Get strong, consistent power from the 49cc full crank 4-cycle engine. Designed for smoother operation and reduced vibration so you can work longer with less fatigue.
- No Mixing, Less Hassle: The advanced 4-cycle design eliminates the need to mix gas and oil. Internal components stay continuously lubricated for reliable all-position operation with cleaner, quieter performance and lower emissions than typical 2-cycle blowers.
- Automatic Oiler for Continuous Performance: Keeps the bar and chain properly lubricated to maintain cutting efficiency and reduce maintenance.
- Compact, Lightweight Design: The 4QL engine is up to 20 percent more compact and lightweight, improving balance and maneuverability during overhead cutting.
- Runs Cleaner and More Efficient: 4QL technology delivers lower emissions and improved fuel efficiency, helping you get more done with fewer fill-ups.
- Complete Kit Included: Includes shoulder strap, mounting hardware, bar and chain cover, spark plug wrench, bar nut wrench, hex wrench, and 2 oz engine oil.
| Brand | Senix |
|---|---|
| Country of Origin | Imported |
| Battery Capacity | 0 Ah |
| Battery Size | None |
| Chain Pitch | 3/8 in. |
| Chain Size | 8 in. |
| Cord Length | 0 in. |
| Engine Brand | YAT |
| Engine Displacement | 26.5cc |
| Engine Type | 4-cycle |
| Fuel Tank Capacity | 9.46 oz. |
| Horsepower | 1 hp |
| Maximum Pole Saw Length | 15 ft |
| Number of Chain Drive Links | 34 |
| Power Type | Gas |
| Primary Material | Polyamide |
| Product Height | 13 in. |
| Product Length | 105.5 in. |
| Product Weight | 12.57 lb. |
| Product Width | 8.7 in. |
| Recommended Oil Type | 10W-30 |
| Saw Bar Length | 8 in |
| Saw Chain Speed | 18 mps |
| Saw Chain Thickness | 0.187 in |
| Saw Features | Automatic Chain Oiler |
| Saw Maximum Cut Diameter | 7.25 in |
| Saw Voltage | N/A |
| Start Type | Recoil |
| Warranty | 2 Year Limited |
| Manufacturer Part Number | CSP4QL-L |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 3 of 3 Questions
Newest questions
Q: What is true max length of pole saw from handle to end of blade? I saw 15 feet in description but then saw a length far shorter than that in product description. Hoping someone can clarify
3 years ago1 Answer
- A: The product length is 8.75ft but has a max reach of 15ft when an average sized person holds it.3 years agoHelpful?
Q: can a longer bar/chain be put on it?
3 years ago1 Answer
- A: We will not recommend using a bar/chain that's not tested by the manufacturer. There may be safety hazard by using a different key component.3 years agoHelpful?
Q: Any attachments available
4 years ago1 Answer
- A: For additional accessories please call 1-800-261-3981 or send email to: Service@senixtools.com.4 years agoHelpful?
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 3 of 3 Questions
Newest questions
Q: What is true max length of pole saw from handle to end of blade? I saw 15 feet in description but then saw a length far shorter than that in product description. Hoping someone can clarify
3 years ago1 Answer
- A: The product length is 8.75ft but has a max reach of 15ft when an average sized person holds it.3 years agoHelpful?
Q: can a longer bar/chain be put on it?
3 years ago1 Answer
- A: We will not recommend using a bar/chain that's not tested by the manufacturer. There may be safety hazard by using a different key component.3 years agoHelpful?
Q: Any attachments available
4 years ago1 Answer
- A: For additional accessories please call 1-800-261-3981 or send email to: Service@senixtools.com.4 years agoHelpful?
Similar Items
-
-
-
-
Top Rated
-
-
Top Rated
-
-
-
-
-
-
Items You May Like
Reviews
- sawing
- for mixing
- price
- purchase
- returns
- satisfaction
- powerful
- setup
1 to 4 of 70 Reviews .
1 – 4 of 70 Reviews
Most Recent
Kilbourne Illinois
Review 1
1 out of 5 stars.
Never Received the Pole Saw — Extremely Frustratin
18 days ago
I waited five days for the pole saw to arrive at my local Tractor Supply store, only for it not to show up. I then waited another week while the package was sent to the wrong location and bounced around through UPS while they tried to figure out where it was supposed to go.
After more than two weeks of waiting and still not having the item, I had to reach out to customer service myself and ask them to issue a refund. The refund was processed while the item was still in transit.
The biggest frustration is that I spent all this time waiting for an item I never received and had to do the work myself to get the situation resolved. The shipping and fulfillment process was extremely disappointing, and I would have expected much better communication and accountability throughout the process.
Overall: Very disappointing experience.
Review 1
5 out of 5 stars.
4 cycle motor !
a month ago
Works like a charm
Review 1
5 out of 5 stars.
4stroke gas pole saw
3 months ago
Starts very easy and works great!
SweepstakesYes
Yes, I recommend this product.
Anonymous
Leesville Louisiana
Review 1
GenderMale
Age45 to 54
5 out of 5 stars.
Very happy with ifs perfornance
7 months ago
I am very impressed with my new pole saw. It is very powerful and does just what i need it to do. I was skeptical about it at first but it has proven ifswlf to me. Thank you.
Yes, I recommend this product.
Originally posted on YAT USA, Inc