Grizzly 24 in. 5 hp Drum Sander, G1066R

Shop all Grizzly

Item # 229409999

$2,879.99

Neighbor’s Club Members earn points with purchases.

Shop all Grizzly

Grizzly 24 in. 5 hp Drum Sander, G1066R

Item # 229409999

$2,879.99

Neighbor’s Club Members earn points with purchases.

You can't beat the G1066R 24"" 5 HP Drum Sander for removing planer knife marks and glue lines after panel glue ups while maintaining a consistent board thickness. Minimize sanding time - the 6"" dual drums allow coarse and fine sanding in one pass.

Changing the 3"" wide by 181-1/2"" long sandpaper is easy and straightforward. Simply open the top cover for unobstructed access. A wide selection of replacement sanding rolls, from coarse grits for fast material removal to ultra-fine grits for a flawless, high-grit finish.

The 11-feet-per-minute feed rate lets you complete your sanding tasks in no time.

The G1066R manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual provides full instructions on how to assemble and maintain your sander.

Made in an ISO 9001 factory

SPECIFICATIONS

Need help?

We offer U.S.-based customer service and technical support to get your questions answered and help keep your equipment running in top condition. And to ensure your satisfaction, the G1066R comes with a 1-year warranty.

Please note: To accommodate the machine's footprint, extension bars may be necessary when using a mobile base.

Hook-and-loop sanding belt tension/sandpaper
Industrial-duty rubber conveyor belt
Two 4"" dust ports
11 FPM conveyor speed
V-belt main motor; chain drive feed motor
Dual 6"" aluminum sanding drums
Four leadscrew table lifting and lowering system

Looking for more information on tools? Check out our guide on essential woodworking power tools in the product documents section.

Sanding motor: 5 HP, 220V, single-phase drum, 25A
Feed motor: 1/4 HP, 1A
Maximum sanding width: 23-1/2""
Maximum workpiece thickness: 4""
Minimum workpiece thickness: 1/8""
Minimum workpiece length: 9""
Feed speed: 11 FPM
Drum speed: 2300 FPM
Sanding drum size: 6""
Sandpaper type: 3"" x 181-1/2"" Hook-and-loop roll
Footprint: 34-1/2"" W x 24""
Overall dimensions: 37"" W x 34-1/2"" D x 43"" H
Approximate shipping weight: 442 lbs.

Brand	Grizzly
Country of Origin	Imported
Amperage	25 A
Battery Size	None
Belt Length	74 in.
Belt Width	24 in.
Cord Length	8 ft.
Dust Collection Method	4 in. dust port
Features	No Additional Features
Housing Material	Steel
Maximum Speed	2300 RPM
Tools Included	Sander
Power Type	Electric
Product Height	43 in.
Product Length	34.5 in.
Product Weight	389 lb.
Product Width	24 in.
Variable Speed	Single Speed
Voltage	220 V
Warranty	1
Manufacturer Part Number	G1066R

Q&As

No questions have been asked about this product.

Items You May Like

Reviews

Rating Snapshot

Select a row below to filter reviews.

8 reviews with 5 stars.

3 reviews with 4 stars.

0 reviews with 3 stars.

0 reviews with 2 stars.

1 review with 1 star.

Overall Rating

4.4

1 out of 1 (100%) reviewers recommend this product

Review this Product

Select to rate the item with 1 star. This action will open submission form.

Select to rate the item with 2 stars. This action will open submission form.

Select to rate the item with 3 stars. This action will open submission form.

Select to rate the item with 4 stars. This action will open submission form.

Select to rate the item with 5 stars. This action will open submission form.

Adding a review will require a valid email for verification

1 to 4 of 12 Reviews .

1 – 4 of 12 Reviews

Southern Woodcraft

South Carolina

Review 1

4 out of 5 stars.

Best value for money

a year ago

Works great for what I need and saves a lot of time

Yes, I recommend this product.

Originally posted on grizzly.com

Response from grizzly.com:

a year ago

Grizzly Customer Experience Team

Thank you for reviewing your sander. We appreciate your business.

Anonymous

Review 1

5 out of 5 stars.

Nice time savings

5 years ago

I used to flatten cabinet doors by hand and it took all day long for most kitchens. This machine gets the job done in an hour. There will be some learning curve on how to wrap the paper so it will last but once you get it right it is good. I found that you need to tape both ends of the drum - that clip is difficult to get right but I use it even with the tape. You need a larger hp dust collector for this the 1.5 hp isn't enough suction luckily I have a 3hp too and just switched dust collectors.

Originally posted on grizzly.com

KIRK T

Review 1

5 out of 5 stars.

8 years ago

I am a hobbyist and am building cabinets for a big kitchen remodel. Finished the first third of the project (raised panel inset doors and dovetailed drawers) the hard way - with a Random Orbital Sander. The thought of repeating this for the rest of the project was more than I could bear. Just used this drum sander on 100 BF of maple for my next set of drawers. Reminds me of the first time I used my Grizzly planer to replace my old bench top planer: Why didn't I get this a long time ago? Used to hate sanding. Not anymore. Very satisfying to feed a board, stand back and let the machine do all the work. Very little setup involved. No problem getting it off the pallet although it is heavy. I had to add a 30AMP 240V leg, but it was easy to do from the subpanel in my garage. Simple to use. I didn't have to make any adjustments to the factory setup. The only complaint I have is I am having trouble keeping the paper from coming off the drum. Maybe I'm doing something wrong? Not sure. After I use up the two rolls of paper I bought, I think I'll switch to Hook and Loop paper. Very satisfied with this product.

Originally posted on grizzly.com

Anonymous

Review 1

5 out of 5 stars.

Great product

9 years ago

This new sander has really increased my shop capacity and will be used on a regular basis.

Originally posted on grizzly.com

Grizzly G0716-10 in. 1 HP Drum Sander

Grizzly G1079R-16 in. 2 HP Drum Sander with Rubber C

Grizzly 37 in. 10 HP Drum Sander, G0449

Grizzly G8749-Drum / Flap Sander

Grizzly G0527-18 in. 5 HP Wide-Belt Sander

Grizzly G0819-15 in. 5 HP Open-End Wide-Belt Sander

Grizzly G0459-12 in. 1-1/2 HP Baby Drum Sander

JET 6.8A Drum Sander with Open Stand

Powermatic 37 in. Dual Drum Sander

Grizzly T10745 1/2 x 18in. Handheld Belt Sander

Grizzly G0571-37 in. 10 HP Wide-Belt Sander

JET Drum Sander with Stand, 1.75 HP Motor

Grizzly G9980-51 in. 30 HP 3-Phase Wide-Belt Sander

Grizzly G0563-6 in. x 89 in. Oscillating Edge Sander

Grizzly G1531 6 x 80in. Benchtop Edge Sander

Powermatic 25 in. Dual Drum Sander

Eastwood 5.3A Electric Mini Belt Sander

Grizzly H8192 1 x 42in. Belt 8in. Disc Combo S

Grizzly H2934-37 in. 20 HP 3-Phase Double Head Wide

Grizzly G0489-3 in. x 79 in. 2-Wheel Metal Belt Grinch

Grizzly G1014Z-6 in. x 48 in. Belt/9 in. Disc Z Series

Grizzly 1 x 30in. Variable Speed Combination Benchtop Sander, G0864

JET Drum Sander with Closed Stand, 1.75 HP Motor

Grizzly G9985-9 in. x 138-1/2 in. 3-Phase Industrial

Grizzly G1276 6 x 48in. Belt 12 in. Disc Combo Sander

Grizzly T27417 4 x 24in. Oscillating Edge Belt and Spindle Sander

Grizzly G1183-6 in. x 48 in. Belt/12 in. Disc Combo Sa

Grizzly H6070 1 x 30in. Belt 5in. Disc Combo San

Grizzly G0446-37 in. 15 HP 3-Phase Platen Type Wide-Belt Sander

Grizzly 4 x 36in. Horizontal/Vertical Bel, G0787

JET Drum Sander with Open Stand, 1.75 HP Motor, 115V, 15A

Grizzly G0564-6 in. x 108 in. Oscillating Edge Sande

Shop Fox W1740-12 in. 1-1/2 HP Benchtop Drum Sander

Grizzly G9984-9 in. x 138-1/2 in. Industrial Oscillating

JET Oscillating Drum Sander with Closed Stand, 1-3/4 HP Motor, 1 Ph, 115V, 15A

JET 20 in. Bench Top Drum Sander, 1 HP Motor, 1 Ph, 115V

Reviews

Rating Snapshot

Overall Rating

Review this Product

Best value for money

Nice time savings

Great product

8 Ratings-Only Reviews