EZ-Slide 1 qt. Gray Van Sickle Paint
EZ-Slide 1 qt. Gray Van Sickle Paint
Item # 2120042
$16.99
Color:
Notice:
This Item cannot be shipped to CA.
Neighbor’s Club Members earn points with purchases.
$16.99
Color:
Out of stock at or near
Grassland (franklin) TN
This item is not available
Search Stores
Temporarily unavailable
Notice:
This Item cannot be shipped to CA.Neighbor’s Club Members earn points with purchases.
EZ-SLIDE graphite paint can be used on farm equipment, industrial or home applications such as gravity boxes, corn picker heads, bean combines, mowers, truck and wagon beds, dump bins, snowplow blades, etc.
- Lifetime limited warranty
| Brand | EZ-Slide |
|---|---|
| Country of Origin | Imported |
| Container Size | 1 qt. |
| Minimum Application Temperature | 50°F |
| Package Quantity | 4 |
| Paint Base | Other |
| VOC Content | 0.543 |
| Warranty | Limited Lifetime Warranty |
| Color | Gray |
| Manufacturer Part Number | RB95124 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 10 Questions
Newest questions
Q: what color is it exactly and is the graphite color black?
Anonymousa year ago1 Answer
- A: Hi Neighbor! Color Graya year agoHelpful?
Q: How is it applied? Can it be used on my Honda lawn mower with a NeXite deck?
a year ago1 Answer
- A: For assistance, please reach out to the manufacturer at https://vansicklepaint.com/industrial/contacta year agoHelpful?
Q: Can this product be used in a feed storage bin to make the ground feed slide out better? Also, is the product toxic to animals?
2 years ago1 Answer
- A: EZ-SLIDE graphite paint can be used on farm equipment, industrial or home applications such as gravity boxes, corn picker heads, bean combines, mowers, truck and wagon beds, dump bins, snowplow blades, etc.2 years agoHelpful?
Q: is it conductive?
4 years ago1 Answer
- A: This product is not listed as being conductive.4 years agoHelpful?
Q: can you use it for a mower deck if the mower deck has been painted or should it be applied over beer metal
5 years ago1 Answer
- A: Application/Use: EZ-SLIDE is a graphite alkyd based lubricating paint that bonds quickly to any clean metal, wood, concrete and most plastic surfaces.5 years agoHelpful?
Q: How would this product work on the bottom of a boat aluminum
5 years ago1 Answer
- A: We can not advise if this would be suitable for that type of project.5 years agoHelpful?
Q: Is this too slick to use on a wood floor utility trailer floor to ease sliding pallets of sod and mulch on? Don’t want them to slide off hauling!
5 years ago1 Answer
- A: Uses include: apply on gravity boxes, truck and wagon beds, dump bins, solar panel coating, snowplow blades, under mower decks (prevents against deck corrosion and wet grass, dirt and grime from adhering to underside), reciprocating shears, seed & fertilizer application, tree spades, sand and salt spreaders, wood chip haulers, car transporters, cranes and booms5 years agoHelpful?
Q: Would this work as a vehicle coating for an old farm truck to keep the mud, snow and gunk at bay? Would I need to go down to bare metal or will it adhere to the existing paint (with appropriate prep work obviously)?
5 years ago1 Answer
- A: Uses include: apply on gravity boxes, truck and wagon beds, dump bins, solar panel coating, snowplow blades, under mower decks (prevents against deck corrosion and wet grass, dirt and grime from adhering to underside), reciprocating shears, seed & fertilizer application, tree spades, sand and salt spreaders, wood chip haulers, car transporters, cranes and booms.5 years agoHelpful?
Q: Would 1 quart be enough to cover a 50" mower deck? Also, I see that it carries a lifetime warranty (according to the can), but how does this stuff really last in actual practice? I've tried several other products, including Por-15..they all wear off...
8 years ago1 Answer
- A: The coverage rate for a quart would be 75-100 square feet, more than enough to do a 50” mower deck. This has a limited warranty. The product does wear off over time and it is designed to wear away as it becomes slicker as it does.8 years agoHelpful?
Q: Would this be effective on a snow blower discharge chute to help prevent clogging?
8 years ago1 Answer
- A: Yes, this product would help with clogging in a snow blower.8 years agoHelpful?
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 10 Questions
Newest questions
Q: what color is it exactly and is the graphite color black?
Anonymousa year ago1 Answer
- A: Hi Neighbor! Color Graya year agoHelpful?
Q: How is it applied? Can it be used on my Honda lawn mower with a NeXite deck?
a year ago1 Answer
- A: For assistance, please reach out to the manufacturer at https://vansicklepaint.com/industrial/contacta year agoHelpful?
Q: Can this product be used in a feed storage bin to make the ground feed slide out better? Also, is the product toxic to animals?
2 years ago1 Answer
- A: EZ-SLIDE graphite paint can be used on farm equipment, industrial or home applications such as gravity boxes, corn picker heads, bean combines, mowers, truck and wagon beds, dump bins, snowplow blades, etc.2 years agoHelpful?
Q: is it conductive?
4 years ago1 Answer
- A: This product is not listed as being conductive.4 years agoHelpful?
Q: can you use it for a mower deck if the mower deck has been painted or should it be applied over beer metal
5 years ago1 Answer
- A: Application/Use: EZ-SLIDE is a graphite alkyd based lubricating paint that bonds quickly to any clean metal, wood, concrete and most plastic surfaces.5 years agoHelpful?
Q: How would this product work on the bottom of a boat aluminum
5 years ago1 Answer
- A: We can not advise if this would be suitable for that type of project.5 years agoHelpful?
Q: Is this too slick to use on a wood floor utility trailer floor to ease sliding pallets of sod and mulch on? Don’t want them to slide off hauling!
5 years ago1 Answer
- A: Uses include: apply on gravity boxes, truck and wagon beds, dump bins, solar panel coating, snowplow blades, under mower decks (prevents against deck corrosion and wet grass, dirt and grime from adhering to underside), reciprocating shears, seed & fertilizer application, tree spades, sand and salt spreaders, wood chip haulers, car transporters, cranes and booms5 years agoHelpful?
Q: Would this work as a vehicle coating for an old farm truck to keep the mud, snow and gunk at bay? Would I need to go down to bare metal or will it adhere to the existing paint (with appropriate prep work obviously)?
5 years ago1 Answer
- A: Uses include: apply on gravity boxes, truck and wagon beds, dump bins, solar panel coating, snowplow blades, under mower decks (prevents against deck corrosion and wet grass, dirt and grime from adhering to underside), reciprocating shears, seed & fertilizer application, tree spades, sand and salt spreaders, wood chip haulers, car transporters, cranes and booms.5 years agoHelpful?
Q: Would 1 quart be enough to cover a 50" mower deck? Also, I see that it carries a lifetime warranty (according to the can), but how does this stuff really last in actual practice? I've tried several other products, including Por-15..they all wear off...
8 years ago1 Answer
- A: The coverage rate for a quart would be 75-100 square feet, more than enough to do a 50” mower deck. This has a limited warranty. The product does wear off over time and it is designed to wear away as it becomes slicker as it does.8 years agoHelpful?
Q: Would this be effective on a snow blower discharge chute to help prevent clogging?
8 years ago1 Answer
- A: Yes, this product would help with clogging in a snow blower.8 years agoHelpful?
Similar Items
-
-
-
Top Rated
-
-
-
-
Top Rated
-
Top Rated
-
-
-
-
Top Rated
Items You May Like
-
-
-
Top Rated
-
-
Top Rated
-
-
-
-
-
Top Rated
-
Top Rated
-
Top Rated
Customers Also Bought
-
-
-
-
-
-
-
-
-
-
Top Rated
-
Top Rated
-
Reviews
Most Helpful Favorable Review
5 out of 5 stars.
Great For Mower Decks
11 years ago
Used this on the underside of a 50" garden tractor mower deck. Fantastic stuff! Grass basically completely stopped sticking to the underside. Mower also performs better in thick wet grass now.
Proper preparation is key. I scrubbed off all rust with a wire brush, then pressure washed, then sanded, and then rinsed with degreaser multiple times. Make sure you go above and beyond with the prep work, and you'll be happy you did.
54 people found this helpful
Show Reviews:
Most Helpful Critical Review
1 out of 5 stars.
NO NO NO!!!!
5 years ago
I dont know how anyone can say this keeps grass from sticking to their deck. I stripped the whole deck, repainted the outside and used this on the inside. Let me tell you, grass sticks worse than ever!!! I actually have to get down on the ground, scrape out inch plus thick grass with a putty knife and spray wd-40 on as much of the deck as I can reach every time I mow or it fills the deck, throwing my blades off so the grass cuts uneven. It's awful. I busted my butt cleaning that deck up and regret using this stuff...made it a complete waste of time. Stay away!!
10 people found this helpful
Show Reviews:
- thickness
- cleaning
- performance
- satisfaction
- weight
1 to 4 of 9 Reviews .
1 – 4 of 9 Reviews
Most Recent
Review 1
4 out of 5 stars.
Good Stuff, functions as advertised
3 years ago
This paint appears to function as advertised: a slippery, ablative coating which keeps gunk from sticking. It works well. Be aware that "ablative" means that it will wear away with usage and that the graphite can/will stain your clothing. I would be tempted to try it as boat bottom paint here in our frequently-clogged Lake St. Clair, MI boat canal; I'm waiting for someone else to try it first and comment.
Dysart, PA
Reviews 5
5 out of 5 stars.
Slicker than "snot on a doorknob" !!!
4 years ago
This product works as designed, with the proper prep and application. I've used both the spray can and now this brush-on, on the underside of my mower decks. GREAT results ! Don't be a "chowder-head", follow the directions !!!
SweepstakesYes
Yes, I recommend this product.
Webster, NY
Review 1
1 out of 5 stars.
NO NO NO!!!!
5 years ago
I dont know how anyone can say this keeps grass from sticking to their deck. I stripped the whole deck, repainted the outside and used this on the inside. Let me tell you, grass sticks worse than ever!!! I actually have to get down on the ground, scrape out inch plus thick grass with a putty knife and spray wd-40 on as much of the deck as I can reach every time I mow or it fills the deck, throwing my blades off so the grass cuts uneven. It's awful. I busted my butt cleaning that deck up and regret using this stuff...made it a complete waste of time. Stay away!!
No, I do not recommend this product.
Review 1
5 out of 5 stars.
Great For Mower Decks
11 years ago
Used this on the underside of a 50" garden tractor mower deck. Fantastic stuff! Grass basically completely stopped sticking to the underside. Mower also performs better in thick wet grass now.
Proper preparation is key. I scrubbed off all rust with a wire brush, then pressure washed, then sanded, and then rinsed with degreaser multiple times. Make sure you go above and beyond with the prep work, and you'll be happy you did.