Dutton-Lainson Goldenrod 496 Water-Block Fuel Tank Filter, 1 in. NPT
Dutton-Lainson Goldenrod 496 Water-Block Fuel Tank Filter, 1 in. NPT
Item # 18952999
Stocked & Ready
Add this item to unlock free delivery!
Get everything you need
Neighbor’s Club Members earn points with purchases.
Dutton-Lainson Goldenrod 496 Water-Block Fuel Tank Filter, 1 in. NPT
Item # 18952999
Stocked & Ready
Add this item to unlock free delivery!
Shopping at
Grassland (franklin) TN
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
Goldenrod fuel tank filters are ideal for farm and ranch, construction, service stations, light industrial, and recreational uses. Two distinct filtering systems are available- See-Thru bowl models with replaceable elements or Spin-On models with disposable canisters. Both feature heavy duty top caps with 3/4 in. or 1 in. NPT pipe fittings and include a gasket. Fuel flows from the inward port of the filter top cap through the paper element inside, which removes microscopic particles from the fuel. Clean fuel then flows up through the center of the element and out through the outward port. Change filter element or canister when fuel flow is restricted.
- Goldenrod WATER-BLOCK water absorbing fuel tank filter for farm, construction, and industrial applications
- For use with common fuels including regular and unleaded gasoline, diesel fuel, gasohol, and various fuel oils; related additives including methyl, ethyl, and isopropyl alcohol 20%
- Water-absorbing polymers trap water (up to approximately one-half cup), restricting fuel flow when it's time to replace the element
- Replaceable element removes water and microscopic particles of contaminants (rust, sand, dirt, scale, and lint) as small as 17 microns
- See-Thru translucent polymer bowl allows for visual monitoring of fuel flow, is alcohol and impact resistant, and stands up to harsh weather conditions
- Heavy duty zinc die-cast top cap with 1 in. NPT pipe fittings provides durability and an excellent bowl to top cap seal
- Easy-to-use sediment drain valve at bottom of bowl
- Maximum recommended flow rate is 25 gpm
- Gravity flow rate is approximately 5 gpm with a 24 in. head
- Working pressure up to 150 psi
- Works well by itself or in combination with a 495 general purpose filter for greater filtering efficiency and longer element life
- Includes a top cap, a gasket, a bowl, and an element
- Made in the U.S.A.
| Brand | Dutton-Lainson |
|---|---|
| Country of Origin | Made in USA |
| Compatibility | Goldenrod fuel tank filter |
| Package Quantity | 1 |
| Primary Color | Yellow |
| Primary Material | Steel |
| Product Height | 9-5/8 in. |
| Product Length | 4-5/32 in. |
| Product Weight | 2-1/2 lb. |
| Product Width | 4-5/32 in. |
| Transfer Tank Accessory Type | Filters |
| Warranty | N/A |
| Manufacturer Part Number | 56602 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 18 Questions
Newest questions
Q: Should water block filter come before or after regular filter
6 days ago1 Answer
- A: Howdy neighbor! If you are running a two-stage system, you should always place the regular particulate filter first to catch dirt and rust before the fuel reaches your water-block filter. This setup keeps your more expensive water-block media from getting prematurely clogged with debris, allowing its special water-absorbing polymers to focus strictly on trapping moisture before it reaches your equipment.5 days agoHelpful?
Q: Can i use this with gasoline 1/2 the time then switxh to diesel? I can flow a gallon of the designated fuel through it before use to a oid contamination.
6 months ago1 Answer
- A: Yes, you can use the Dutton-Lainson Goldenrod 496 Water-Block Fuel Tank Filter interchangeably with both gasoline and diesel fuel, provided you flush the system and replace the filter element as needed.6 months agoHelpful?
Q: I have wood splitter and wonder if the water block filter will filter out condensation / water which seems to be mixed in the hydraulic fluid ?
9 months ago1 Answer
- A: Yes, the Dutton-Lainson Goldenrod 496 Water-Block Fuel Tank Filter can filter out condensation/water from hydraulic fluid, provided the fluid is a light viscosity and you use it as a transfer filter, not mounted in the high-pressure return line of your system.9 months agoHelpful?
Q: Can I install the 495 and 496 filters between my diesel tank and generator?
3 years ago1 Answer
- A: Hello, Yes, this product is designed for use with common fuels including regular and unleaded gasoline, diesel fuel, gasohol, and various fuel oils; related additives including methyl, ethyl, and isopropyl alcohol 20%. Thank you.3 years agoHelpful?
Q: I see on the box of the filter it says the water block feature is disabled , so im assuming ethanol makes the water block feature not work ?
4 years ago1 Answer
- A: For technical support, please contact 402-462-4141.4 years agoHelpful?
Q: Does the drain valve at the bottom allow the draining of water and sediment at the bottom of the filter? When I open the valve, nothing comes out, it only allows air bubbles to enter into the filter housing. Am I doing something wrong?
4 years ago1 Answer
- A: The filter absorbs the water, so there will not be any to drain out the bottom. When the filter is full there will be a change in the flow of fuel, it will be very restricted.4 years agoHelpful?
Q: can the 496 come with 3/4 threads and is the outlet 3/8 for heating oil copper line to the house? Or do I have to use reducers to be compatible? And thank you.
4 years ago1 Answer
- A: The filters are available in both 1” or ¾” inlet/outlet. We do not offer any other sizes.4 years agoHelpful?
Q: Can I get a 5 micron or finer filter for it? I will be mixing old oil with diesel fuel and need to filter it much better than 17 microns
5 years ago1 Answer
- A: That option is not available for this product.5 years agoHelpful?
Q: Would this work on a boiler that is running on #2 diesel fuel? It is a public building and we are having trouble with water getting into the fuel. I have run into a brick wall with the technicians who maintain the system, saying that it won't work.
5 years ago2 Answers
- A: It should, but it would only be a band-aid until you figure out the source of the water.5 years agoHelpful?
Q: If I am going to run a 495 and 496 filters in series on the outlet of a 20 gpm transfer tank pump for diesel, which filter should be inline first?
7 years ago1 Answer
- A: You should install the standard 495 filter first inline from the fuel tank, followed by the 496 Water-Block filter.7 years agoHelpful?
1 - 10 of 18 Questions
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 18 Questions
Newest questions
Q: Should water block filter come before or after regular filter
6 days ago1 Answer
- A: Howdy neighbor! If you are running a two-stage system, you should always place the regular particulate filter first to catch dirt and rust before the fuel reaches your water-block filter. This setup keeps your more expensive water-block media from getting prematurely clogged with debris, allowing its special water-absorbing polymers to focus strictly on trapping moisture before it reaches your equipment.5 days agoHelpful?
Q: Can i use this with gasoline 1/2 the time then switxh to diesel? I can flow a gallon of the designated fuel through it before use to a oid contamination.
6 months ago1 Answer
- A: Yes, you can use the Dutton-Lainson Goldenrod 496 Water-Block Fuel Tank Filter interchangeably with both gasoline and diesel fuel, provided you flush the system and replace the filter element as needed.6 months agoHelpful?
Q: I have wood splitter and wonder if the water block filter will filter out condensation / water which seems to be mixed in the hydraulic fluid ?
9 months ago1 Answer
- A: Yes, the Dutton-Lainson Goldenrod 496 Water-Block Fuel Tank Filter can filter out condensation/water from hydraulic fluid, provided the fluid is a light viscosity and you use it as a transfer filter, not mounted in the high-pressure return line of your system.9 months agoHelpful?
Q: Can I install the 495 and 496 filters between my diesel tank and generator?
3 years ago1 Answer
- A: Hello, Yes, this product is designed for use with common fuels including regular and unleaded gasoline, diesel fuel, gasohol, and various fuel oils; related additives including methyl, ethyl, and isopropyl alcohol 20%. Thank you.3 years agoHelpful?
Q: I see on the box of the filter it says the water block feature is disabled , so im assuming ethanol makes the water block feature not work ?
4 years ago1 Answer
- A: For technical support, please contact 402-462-4141.4 years agoHelpful?
Q: Does the drain valve at the bottom allow the draining of water and sediment at the bottom of the filter? When I open the valve, nothing comes out, it only allows air bubbles to enter into the filter housing. Am I doing something wrong?
4 years ago1 Answer
- A: The filter absorbs the water, so there will not be any to drain out the bottom. When the filter is full there will be a change in the flow of fuel, it will be very restricted.4 years agoHelpful?
Q: can the 496 come with 3/4 threads and is the outlet 3/8 for heating oil copper line to the house? Or do I have to use reducers to be compatible? And thank you.
4 years ago1 Answer
- A: The filters are available in both 1” or ¾” inlet/outlet. We do not offer any other sizes.4 years agoHelpful?
Q: Can I get a 5 micron or finer filter for it? I will be mixing old oil with diesel fuel and need to filter it much better than 17 microns
5 years ago1 Answer
- A: That option is not available for this product.5 years agoHelpful?
Q: Would this work on a boiler that is running on #2 diesel fuel? It is a public building and we are having trouble with water getting into the fuel. I have run into a brick wall with the technicians who maintain the system, saying that it won't work.
5 years ago2 Answers
- A: It should, but it would only be a band-aid until you figure out the source of the water.5 years agoHelpful?
Q: If I am going to run a 495 and 496 filters in series on the outlet of a 20 gpm transfer tank pump for diesel, which filter should be inline first?
7 years ago1 Answer
- A: You should install the standard 495 filter first inline from the fuel tank, followed by the 496 Water-Block filter.7 years agoHelpful?
1 - 10 of 18 Questions
Similar Items
-
-
Top Rated
-
-
-
-
-
-
-
Top Rated
-
-
-
Items You May Like
-
Top Rated
-
Top Rated
-
Top Rated
-
Top Rated
-
-
-
Top Rated
-
-
-
-
-
Top Rated
Reviews
1 to 4 of 29 Reviews .
1 – 4 of 29 Reviews
Most Recent
Bedford PA
Review 1
1 out of 5 stars.
Bad quality
2 months ago
Product works as it should but quality of it is not good.casting had cracks in it..it doesn’t leak…
SweepstakesYes
Yes, I recommend this product.
Gold hill oregon
Review 1
5 out of 5 stars.
Filter
2 years ago
Works great easy to put on clear so you can see everything
SweepstakesYes
Yes, I recommend this product.
Bainbridge Twp.
Review 1
4 out of 5 stars.
Poor buying experience
2 years ago
The filter looks like a well made product, however I will Never order from TractorSupply.com again!
2023 Q4 SweepstakesNo
Review 1
5 out of 5 stars.
dutton goldenrod 496 waterblock
3 years ago
fuel transfer tank water block is nice works great and a decent price at tractor supply, the store manager Brent... at east side Jackson, mi is a poor representation of tractor supply and has lost our business though.
2023 Sweepstakes EntryYes