CountyLine 10 ft. x 4.1 ft. 6-Bar Utility Tube Gate, 1-3/4 in. Tube, Gray
Limited Time Deal
Item # 2089464
Sale
Was$149.99
Save $15.00
Size: 50 in.
Color:
Neighbor’s Club Members earn points with purchases.
Limited Time Deal
Item # 2089464
Sale
Was$149.99
Save $15.00
Size: 50 in.
Color:
Out of stock at or near
Grassland (franklin) TN
Out of stock delivering to
37027
This is a Big & Bulky item.
Bulk Discount buy 10 get 5% off Each.
This item is not available
Search Stores
Temporarily unavailable
Neighbor’s Club Members earn points with purchases.
Provides Easy Access and Greater Security
The CountyLine Utility Gate is designed to make it easy for you and your livestock to get in and out. This high-quality walk-through is extremely sturdy so you can safely pass through with large equipment. The gate also comes with a chain latch to ensure your animals do not escape.
Animal Friendly Design
This 10 ft. utility gate has squared corners without sharp edges and is made of extremely durable but smooth steel rods that keep your animals safely enclosed with minimal chance of injury.
Made with Mobility in Mind
The CountyLine Utility Gate is specifically designed for portability. with a universal quick-pin latch system this light-weight piece assembles easily.
When it Comes to Your Animals, We Don't Compromise Quality
The CountyLine Utility Gate has 1 3/4 inch in diameter tubing to provide ultimate strength and protection. with continuous-welded saddle joints and a superior E-Coat finish, you can be sure that this panel will last for years.Note: All gates are 4 in. shorter than listed length to allow for gate hardware and proper clearance. Recommended for light confinement only
- 10 ft. (L) x 4.1 ft (H)
- 1-3/4 in. diameter steel tubing
- Vertical Z braces
- Quick pin-latch system for easy hook-up
- Corrosion-resistant E-Coat finish
| Brand | CountyLine |
|---|---|
| Country of Origin | Made in USA |
| Features | 10 ft. (L) x 4.1 ft (H) |
| Finish | Coated |
| Gate Height | 4.1 ft |
| Gate Length | 10 ft |
| Gate Type | Tube |
| Primary Material | Powder Coated Steel |
| Product Weight | 40 lb. |
| Warranty | One-year limited |
| Color | Gray |
| Size | 50 in. |
| Panel/Gate Size Range | Up to 8 ft |
| Manufacturer Part Number | 40130107 |
Q: This gate was not 10 feet wide. It’s a little over 9 feet, just FYI
5 days ago- A: All gates are 4 in. shorter than listed length to allow for gate hardware and proper clearance. This note is listed on the Product details.4 days agoHelpful?
Q: Does this gate come with hinges?
2 months ago- A: Yes, It ships with a snap chain, welded chain latch, 6” screw-in hinge pins, an adjustable top hinge and welded hinge on the bottom.2 months agoHelpful?
Q: What size drill bit is needed for the hinges?
2 months ago- A: 9/16" drill bit.2 months agoHelpful?
Q: Weight?
6 months ago- A: 44 lbs.6 months agoHelpful?
Q: Looking for installation instructions
7 months ago- A: To install a 10 ft. utility tube gate, first, set the hinge post and a second post to the desired spacing, which is about 1" wider than the gate itself for a standard installation. Next, mark and drill holes for the hinges on both posts, then attach the hinges to the post using hinge pins or lag screws. Hang the gate on the hinges and use a level to ensure it is hanging straight, adjusting the hinges as needed before securing them permanently. Finally, attach the latch mechanism to the other post and the gate. This video demonstrates the entire process of installing a 10 ft. utility gate, including marking, drilling, and hanging YouTube · Stoney Creek Heritage Farm7 months agoHelpful?
Q: what is the gauge of metal used?
10 months ago- A: Arch – 20 gauge Filler Tubes – 22 gauge10 months agoHelpful?
Q: What size hinges does it take?
11 months ago- A: It ships with a snap chain, welded chain latch, 6” screw-in hinge pins, an adjustable top hinge and welded hinge on the bottom.11 months agoHelpful?
Q: How much does it weigh?
2 years ago- A: Approximately 40 lbs.2 years agoHelpful?
Q: Does this gate come with the hardware to hang the gate?
2 years ago- A: It ships with a snap chain, welded chain latch, 6” screw-in hinge pins, an adjustable top hinge and welded hinge on the bottom.2 years agoHelpful?
Q: What's the weight of the gate
2 years ago- A: Approximately 40 lbs.2 years agoHelpful?
Similar Items
-
-
-
-
-
-
Top Rated
-
-
-
-
-
-
Items You May Like
-
-
Top Rated
-
Top Rated
-
-
-
-
Top Rated
-
-
-
-
-
Customers Also Bought
-
-
-
-
-
-
Top Rated
-
Top Rated
-
-
-
-
Top Rated
-
Top Rated
Reviews
Customer Images and Videos
- price
- quality
- satisfaction
- purchase
- value
- weight
- sturdy
- size
Best buy for the price.
Good product worth buying
Good
Yes, I recommend this product.