Skip to Main Content
MESSAGE

CountyLine Rotary Cutter, 4 ft.

SKU # 212723099
Product price

Save Up To
See Price at Check Out
Why?
Product Rating is 3.9
3.9
(27)

Financing Available! Click here for more details...

Quantity

Autoship

Delivery Options:

Item Information

The CountyLine Rotary Cutter is a 3-point rear attach cutter that is ideal for cutting grass, stalks, and light brush.

  • Works efficiently from 25-45 HP on 540 RPM tractors
  • 45 HP heavy-duty cast iron 540 RPM gearbox
  • Series 4 shielded PTO shaft with shear pin
  • Category 1 pins included
  • 24 in. H x 50 in. W x 69 in. L

Specification Description
Product Weight: 345 lb.
Product Type: Rotary Cutters
Brand: CountyLine
Manufacturer Part Number RC4
CountyLine Rotary Cutter, 4 ft. is rated 3.9 out of 5 by 27.
Rated 1 out of 5 by from Light weight poor quality I bought this a little over a year ago. Used it 5 times. The connecting rods pulled away from the base, the weld broke away because it was welded to the top sheet of steel instead of the frame. They didn't cover it. 7th time I used it the three point stud broke a larger hole in the arm and pulled out. The light weight steel bends easily.
Date published: 2018-06-19
Rated 5 out of 5 by from Rotary cutter Nice unit works well with our tractor and is easy for us to handle.
Date published: 2018-04-08
Rated 5 out of 5 by from Works great Purchased the 4' cutter for behind my 25hp tractor. The deck has exceeded my expectations and to use the same wording as a previous review, it cuts anything my tractor can knock down.
Date published: 2017-09-07
Rated 3 out of 5 by from Setup is NOT particularly easy. Sure hope this runs and cuts better than the setup has gone. You will need a set of slip ring pliers and a number of larger SAE wrenches - my rarely used 1/2" drive set got a workout. As noted elsewhere, be sure you have on hand gear oil and a grease gun - the unit ships dry. The real beast is the PTO shaft attachment. The shield collar is retained by 3 nylon tabs, part of a ring collar near the end of the shaft. In theory, you press on them with a screwdriver to release them, slide the collar down to perform the attachment steps, then snap the collar back in place over the tabs. Short version: NOT so easy. Finally got it off after many, many tries, and had to place a nylon zip tie over that ring collar and whack the shield a few good whacks with a mason's hammer to get it to seat. Manufacturer: it should NOT be that hard!
Date published: 2017-08-27
  • y_2018, m_7, d_20, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_27
  • loc_en_US, sid_212723099, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_tractorsupply

Will this work with a Kubota BX 2350d?

Asked by: Mkate
No, recommended sku# is 2122515.
Answered by: ErlindaC
Date published: 2018-05-23

what kind of warranty is with this unit

Asked by: samharb
The manufacturer offers a 1-year manufacturers defect warranty on all non-commercial use of standard and sub-compact products. Any use by commercial, state, and municipalities will void warranty. Please contact your dealer to initiate all warranty claims. Warranty specifications: • Must show proof of purchase within 1 year of purchase date. • Photos must be provided to ensure proper warranty claim. The above information must be provided in order for us to process your claim. Once a warranty claim is accepted, the manufacturer will issue full credit or exchange the product at no cost to the store or customer. Warranty limitations: • Normal wear items are excluded from the manufacturer’s warranty. If you have questions concerning our warranty program or any questions concerning our products, please contact your dealer.
Answered by: ErlindaC
Date published: 2018-06-28

Will this work with Ford 1510 3hp diesel engine at 20hp at PTO ?

Asked by: Blazer 64
No, the recommended SKU is 2122476.
Answered by: Valery
Date published: 2017-07-12

Will it work on John Deere 1023e

Asked by: Wingate
No, the recommended sku is 2122515.
Answered by: ErlindaC
Date published: 2018-05-17

Will this work with Mahindra 28HST tractor?

Asked by: CHTom
No, the recommended sku is 2122515.
Answered by: Valery
Date published: 2017-08-18

Will this work with a John Deere 670?

Asked by: EAND1
No, it will not fit. It is recommended sku# is 2122515.
Answered by: Tbeacher
Date published: 2018-05-15

I have a Mahindra Mighty Max 28. The PTO is 23.5 HP, the tractor is 28HP. Which 4foot Cutter would you recommend?

Asked by: R Cribb
SKU 2127230, CountyLine Rotary Cutter, 4 ft., is a very good pairing.
Answered by: PHailey
Date published: 2017-02-09

Will this cutter work with a Massey Ferguson GC1705 22.5 hp tractor

Asked by: Binor
No, the recommended SKU is 2122515.
Answered by: Valery
Date published: 2017-05-04
  • y_2018, m_7, d_20, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_121
  • loc_en_US, sid_212723099, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING)]
  • clientName_tractorsupply
Attachments (  1 - 1 of 1  )