Doing the job that we wanted it to do.

Good value and works as it should. Tines seem to not be as rigid as they should be as I find myself having to bend them to proper shape after use.

The lower top link is an inch too high to fit a Kubota BX three point quick connect. It has no stand in the front so it has to either be lifted or propped up on blocks.

Has mostly held up for me when used with a 35hp HST Kioti, no tine fractures yet. Shortly after purchase I added the wheel kit to the implement and a hydraulic top link to the tractor. This changes everything since it's now a light grading tool. I over stressed the thing and bent the main c-channel, this is fine because I was able to remove the tines and flip the whole bar around, now I can work on bending it the other way. This will work for a time, but the c-channel is a fairly standard item I wouldn't mind cutting out and replacing, it should be boxed for strength anyway. Another interesting problem popped up this winter, the main box frame between the pivot support and the 3 point frame has expanded due to water filling from the positioning pin bore and freezing up. I don't think this is terribly harmful but I'll be drilling a few holes in the lower seam to allow drainage... guess I'll just point a heater at it to drive out the water and spray oil in there to stop corrosion until this summer anyway... I agree with others that it needs landing gear... Again, I will add that myself. Last item that would make a nice optional purchase, would be a drop-down blade. I might buy a 6ft loader cutting edge and mount that to an added pivot point.