Tarter 5 ft. Finish Mower
Tarter 5 ft. Finish Mower
Item # 212054799
$2399.99
or
or
Neighbor’s Club Members earn points with purchases.
$2399.99
or
or
$72/mo.† for 36 months totaling $2592 at 3.99% APR or earn $119 in Rewards+ on this purchase.
Out of stock at or near
Grassland (franklin) TN
Out of stock delivering to
37027
This is a Big & Bulky item.
Neighbor’s Club Members earn points with purchases.
The Tarter 5 ft. Finish Mower gives customers a nice, well-manicured lawn. This is for folks who like to continually maintain their property and keep it looking great. Our mower works great even in ankle-deep grass with its rear-discharge design. Tarter's free-floating hitch system and 10 tires allows the mower to follow the contours of the ground to mow evenly, even when the terrain is uneven. Three cast iron spindle housings feature grazable bearings and the top gearbox has heat-treated gears. This finish mower is Cat 1 and quick hitch compatible, ideally suited for tractors 20-60 PTO HP. A 6 version is also available.
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
- Heavy-duty steel deck and cast iron gearbox
- Shielded PTO shaft with shear pin
- 34 in. H x 63 in. W x 71 in. L, 60 in. cutting width
- Quick hitch compatible
- Rear discharge
- 20-60 HP
- Free-floating hitch system and 10 tires allows the mower to follow the contours of the ground to mow evenly
| Brand | Tarter |
|---|---|
| Country of Origin | Made in USA |
| Blade Length | 19.75 in. |
| Blade Material | Steel |
| Blade Thickness | 0.25 in. |
| Blade Width | 2 in. |
| Cutting Thickness Range | cutting width 60 in. |
| Cutting Width | 60 in. |
| Discharge Location | Rear |
| Frame Material | Steel |
| Handle Length | 0 N/A |
| Handle Material | Steel |
| Head Length | 0 N/A |
| Head Material | Steel |
| Head Type | N/A |
| Head Width | 0 N/A |
| Maximum Cutting Height | 5.25 in. |
| Maximum Tractor Horsepower | 60 HP |
| Minimum Cutting Height | 0.75 in. |
| Minimum Tractor Horsepower | 20 HP |
| Number Of Blades | 3 |
| Number Of Wheels | 4 |
| Product Height | 34 in. |
| Product Length | 71 in. |
| Product Weight | 628 lb. |
| Product Width | 63 in. |
| PTO Drive Type | Shear pin |
| Wheel Size | 10 in. diameter tires x 3.15 in. wide with nylon bushing |
| Manufacturer Part Number | FM205 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 127 Questions
Newest questions
Q: Do they make a 4ft
21 days ago1 Answer
- A: No, these are only offered in 5' and 6' widths18 days agoHelpful?
Q: Will this work with MF 245 with dual speed
21 days ago2 Answers
- A: Yes, this should be compatible with this unit.19 days agoHelpful?
Q: I have all the height adjustment washers on top and the lowest it will cut is 3” what can I do to make it lower?
a month ago1 Answer
- AI-generated, Human-approvedA: The minimum cutting height for this mower is 0.75 inches. To adjust the height, you can move the spacers on the wheel yokes; placing more spacers below the wheel arm will raise the deck, while placing them above the arm will lower it.a month agoHelpful?
Q: Will this work with a John Deere 1025R?
a month ago1 Answer
- A: No, this tractor does not meet the horsepower requirements for this unit. No recommendations.a month agoHelpful?
Q: Will this work with a kabota b7610 tractor
a month ago1 Answer
- A: No, this tractor does not meet the horsepower requirements for this unit. No recommendations.a month agoHelpful?
Q: Will this work on a 2305 John deere
3 months ago1 Answer
- A: Hello, the Tarter 5 ft. Finish Mower (FM205) is physically compatible with your John Deere 2305 as both use a Category 1 three-point hitch and a standard 540 RPM PTO. However, it is a demanding match for this specific tractor's power and weight limits.3 months agoHelpful?
Q: Will this work with my BX2660?
4 months ago1 Answer
- A: The Tarter 5 ft. Finish Mower is a functional but tight match for your Kubota BX2660, as it sits right at the tractor's 19.5 PTO HP and lift capacity limits. While it will handle a maintained lawn effectively, you will likely need front weights to keep the steering stable and a slower ground speed to prevent the engine from bogging down in thick grass.4 months agoHelpful?
Q: Would this work with Lipton cx2510
7 months ago1 Answer
- A: No, this tractor does not meet the horsepower requirements for this unit. No recommendations.7 months agoHelpful?
Q: Will this work on john deere 755
8 months ago1 Answer
- A: No, this tractor does not meet the horsepower requirements for this unit. No recommendations.8 months agoHelpful?
Q: I have a 15 horse Kabota tractor with that work behind a tractor
11 months ago1 Answer
- A: No, this would not meet the horsepower requirements for this unit.11 months agoHelpful?
1 - 10 of 127 Questions
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 127 Questions
Newest questions
Q: Do they make a 4ft
21 days ago1 Answer
- A: No, these are only offered in 5' and 6' widths18 days agoHelpful?
Q: Will this work with MF 245 with dual speed
21 days ago2 Answers
- A: Yes, this should be compatible with this unit.19 days agoHelpful?
Q: I have all the height adjustment washers on top and the lowest it will cut is 3” what can I do to make it lower?
a month ago1 Answer
- AI-generated, Human-approvedA: The minimum cutting height for this mower is 0.75 inches. To adjust the height, you can move the spacers on the wheel yokes; placing more spacers below the wheel arm will raise the deck, while placing them above the arm will lower it.a month agoHelpful?
Q: Will this work with a John Deere 1025R?
a month ago1 Answer
- A: No, this tractor does not meet the horsepower requirements for this unit. No recommendations.a month agoHelpful?
Q: Will this work with a kabota b7610 tractor
a month ago1 Answer
- A: No, this tractor does not meet the horsepower requirements for this unit. No recommendations.a month agoHelpful?
Q: Will this work on a 2305 John deere
3 months ago1 Answer
- A: Hello, the Tarter 5 ft. Finish Mower (FM205) is physically compatible with your John Deere 2305 as both use a Category 1 three-point hitch and a standard 540 RPM PTO. However, it is a demanding match for this specific tractor's power and weight limits.3 months agoHelpful?
Q: Will this work with my BX2660?
4 months ago1 Answer
- A: The Tarter 5 ft. Finish Mower is a functional but tight match for your Kubota BX2660, as it sits right at the tractor's 19.5 PTO HP and lift capacity limits. While it will handle a maintained lawn effectively, you will likely need front weights to keep the steering stable and a slower ground speed to prevent the engine from bogging down in thick grass.4 months agoHelpful?
Q: Would this work with Lipton cx2510
7 months ago1 Answer
- A: No, this tractor does not meet the horsepower requirements for this unit. No recommendations.7 months agoHelpful?
Q: Will this work on john deere 755
8 months ago1 Answer
- A: No, this tractor does not meet the horsepower requirements for this unit. No recommendations.8 months agoHelpful?
Q: I have a 15 horse Kabota tractor with that work behind a tractor
11 months ago1 Answer
- A: No, this would not meet the horsepower requirements for this unit.11 months agoHelpful?
1 - 10 of 127 Questions
Similar Items
-
-
-
-
-
Top Rated
-
-
-
Top Rated
-
-
-
-
Reviews
Most Helpful Favorable Review
5 out of 5 stars.
TAKE RESPONSIBILITY AND CHECK IT OUT FIRST!
5 years ago
I read all the reviews and did my research before buying this 5 ft Countyline finishing mower. I bought one this morning and spent the afternoon greasing it, checking all the bolts, replacing the pins that hold the wheels on with 1/4 inch bolts and nylon lined nuts, and when all that was done I checked the gear oil in the gear box. The gear box was dry but that seemed a common problem when I read the reviews. It may seem like a lot of hassle for a new mower but after I finished putting in that extra effort it cuts like a champ and this thing is built like a tank. I was really impressed with the thickness of the steel in the mower. I do lots of research before it but most anything. You'll be disappointed if you try to find another mower of this quality anywhere close to this price. Save time and just buy the Countyline Mower at Tractor Supply. Just be sure to take the time to check it out thoroughly before you ever engage to power take off. MOST IMPORTANTLY, CHECK THE OIL IN THE GEAR BOX! Once again, I find myself saying, "Thank you Tractor Supply for another great product and more great service!"
38 people found this helpful
Show Reviews:
Most Helpful Critical Review
2 out of 5 stars.
Mix Review
13 years ago
Cuts well but there are problems. The pins fall off the wheels. I finally had to do them differently. Also, the grease nipples on the wheels fall off since they are not machined correctly and can not be screwed tight. Had to re-do those differently too. Greasing the drive-train u-joints is extremely hard because there is very little room to get that done. When you pay this much for a piece of equipment you expect more than that. I bought it about 40 days ago. I hope I do not have further problems. I am disappointed.
35 people found this helpful
Show Reviews:
Customer Images and Videos
- purchase
- wheels
- wheels
- price
- grass
- satisfaction
- quality
- returns
1 to 4 of 101 Reviews .
1 – 4 of 101 Reviews
Most Recent
Central Minnesota
Review 1
5 out of 5 stars.
Tarter 5 ft Finish Mower
11 days ago
Assembly wasn't too bad. The hardest part was getting it out of the shipping crate. The first time I mowed, two wheels froze up. Adjusted and regreased them and things are fine with the wheels. Have mowed a couple times now and doing a great job. I have a JD 855 which is handling it well. It was bulky mowing with the bucket on. Had concerns about removing it because of reading about needing front end weight of some kind. However, without the bucket on, the tractor is very stable with the mower on back.
Yes, I recommend this product.
Anonymous
Louisiana
Review 1
4 out of 5 stars.
Tarter 5ft mower
11 months ago
This mower cuts excellent for me, only downfall I found is if you ordered it online like I did it comes in a crate and it is difficult to take out of the crate by yourself but it is simple to put together.
SweepstakesYes
Yes, I recommend this product.
Review 1
1 out of 5 stars.
Dont cut low enough
a year ago
Cannot get it to cutt 1 1/2 incheslike was told it would.
No, I do not recommend this product.
Silver Springs, FL
Review 1
3 out of 5 stars.
WARNING
a year ago
Unit was scraped due to packaging and shipping. Furthermore, no grease or gear oil provided from Tarter. A bit unfortunate as to how much this unit costs...
SweepstakesYes
No, I do not recommend this product.