Champion Power Equipment ATLAS Truck/SUV Synthetic Rope Winch Kit with Speed Mount Hitch Adapter, 12,500 lb.

The Champion Power Equipment ATLAS 201611 12,500 synthetic winch kit changes how a recovery winch fits into your life. Instead of dedicating one vehicle to winch duty with a custom bumper, the included Speed Mount hitch adapter drops the entire winch into any 2 in. receiver front or rear, on the truck, on the SUV, on a trailer, wherever you need it. Pull the pin and it's off in seconds. Behind the portability is a serious recovery tool. A 3 HP series-wound motor drives a 261:1 planetary gear reduction for sustained torque under load, with 12,500 lb. of pulling capacity for trucks, SUVs, and heavy property work. The included snatch block lets you rig a 2:1 line and double your effective pull to roughly 25,000 lb. when you need it. The 3/8 in. synthetic rope spools 85 ft. off the drum and is meaningfully lighter than steel cable in your hands, easier to repack, and drops to the ground rather than snapping back with stored energy if it ever fails a real safety advantage in a recovery. It also floats, which matters in water crossings. Brake strength is rated at 18,000 lb. to hold under load, and a hawse fairlead feeds the synthetic rope cleanly across the mouth of the drum. Control comes from a 12 ft. corded handheld remote, letting you operate the winch from a safe distance and spot your line from outside the vehicle. Three 50A fuse protectors are wired into the heavy 3-gauge battery cables to guard the circuit against the high current draw a series-wound motor pulls during recovery work. A 6 ft. battery lead and a 3.4 ft. winch lead join at a quick connector with protective caps on both halves, so you wire the battery side once and plug the winch in when you need it front receiver, rear receiver, or moved to another vehicle entirely. Caps keep the contacts clean and shielded between uses. An IP67 rating and salt-fog-tested finish stand up to mud, water, and corrosion across a broad operating temperature range, so the kit is ready whether it lives in your garage between trips or rides along permanently in the truck bed. Included in the box: winch body with built-in circuit breaker, Speed Mount hitch adapter, hawse fairlead, 12 ft. corded remote, snatch block, fuse-protected battery cables with quick connector, clevis hook, and the hardware to mount it. For permanent installs, a bumper-mounted plate is not included the winch fits the industry-standard 10 x 4.5 in. bolt pattern on most truck and SUV winch-ready bumpers and aftermarket mounts. This model comes with a 2-year limited warranty, FREE lifetime technical support, and access to nationwide service centers-giving you peace of mind with your purchase.Included: Remote Control, Hawse Fairlead, Speed Mount Hitch Adapter (2 in.), Snatch Block, Clevis Hook, Hook Strap, Battery Connection Cable