AgKNX 12 in. Heavy-Duty Auger with 2 in. Round
AgKNX 12 in. Heavy-Duty Auger with 2 in. Round
Item # 192950999
$174.99
Get everything you need
Neighbor’s Club Members earn points with purchases.
$174.99
New Cardmembers earn a $20 Reward‡ with qualifying purchase of $20 or more plus earn 5% in Rewards+ on this purchase. Valid through 8/9/26.
This item is available online only
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
The AgKNX 12 in. Heavy-Duty Auger with 2 in. Round is for use with tractor mounted post hole diggers and skid steers to make fence installation easier. The heavy-duty auger attaches to most 2 in. gearbox output shafts. This auger features thick double flighting with more extensive welding and a reinforced input shaft collar. for tractors and skid steers with 2 in. round output shafts, this auger bit is perfect. Shop all AgKNX augers today.
- Diameter: 12 in.
- Height: 48 in.
- Bolt on spiral tip
- 4 replaceable, heavy-duty high carbon cutting teeth
- This auger is capable of auguring a 4 ft. deep hole
- Heavy-duty 3-point auger bit compatible with 2 in. round drive post hole diggers
- Reinforced collar (takes two 1/2 in. diameter bolts at 90 degrees apart)
| Brand | AgKNX |
|---|---|
| Country of Origin | Imported |
| Auger Diameter | 12 in. |
| Auger Length | 48 in. |
| Auger Material | Steel |
| Auger Speed | 0 rpm |
| Boom Diameter | 0 in. |
| Boom Pole Shape | N/A |
| Compatibility | Post Hole Digger, Skid Steer Digger |
| Features | Replaceable Cutting Blade |
| Gearbox Ratio | N/A |
| Hitch Type | N/A |
| Lift Capacity | 0 lb. |
| Maximum Tractor Horsepower | 200 hp |
| Minimum Tractor Horsepower | 50 hp |
| Number Of Lifting Loops | 0 |
| Primary Material | Steel |
| Product Height | 12 in. |
| Product Length | 48 in. |
| Product Weight | 58 lb. |
| Product Width | 12 in. |
| Recommended Auger Part Number | 23-042 |
| Manufacturer Part Number | 23-042 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 11 Questions
Newest questions
Q: What type of extension would fit this auger if I want to dig deeper than 48”?
10 months ago1 Answer
- A: Depends on the output shaft side of your gearbox. For this particular auger, you will need 2" round extension. You can give us a call to discuss the plan. Thank you10 months agoHelpful?
Q: What is the actual inside diameter of the auger shaft that fits over the gearbox's output shaft?
11 months ago1 Answer
- A: per my calipers, 2 5/128" or 51.84mm or 2.04" Cheers11 months agoHelpful?
Q: what are the bolt hole centers for the 2" shaft?
a year ago1 Answer
- A: We're not sure what measurement you are asking for. From the end of the shaft to the center of the bolt holes?a year agoHelpful?
Q: will it fit a 3033 r John deer
3 years ago1 Answer
- A: I'm not really sure what the question is. The 12" HD auger will fit a 2" round drive gearbox output shaft. For the John Deere 3033R, I would recommend our Model 650 post hole digger. This post hole digger has a 2" round output shaft from the gearbox and you can use the 12" HD auger. Without the post hole digger you can't use the auger on the tractor. Hope this helps. Thanks3 years agoHelpful?
Q: Will this work on your Model 650 Post Hole Digger, plan on it being used with a kubota 4701?
3 years ago1 Answer
- A: This is a pretty big tractor. Our model 1500 would be the best fit for this. Thanks3 years agoHelpful?
Q: Is the thickness of the first flute .3" (where the cutting tips mount)or is that the thickness of the main flute ? If the main flute is that thick, it is a heavy duty auger.
3 years ago1 Answer
- A: The thickness is hard to measure based on how the flighting is manufactured. The flat material is made from 0.229" thick steel. The base flighting is the same as the main flighting other than the revolutions.3 years agoHelpful?
Q: Will this dig a 48" deep hole?
3 years ago1 Answer
- A: Yes, the length of the auger is 48" so to dig a 48" deep hole you need to drive the auger the full length.3 years agoHelpful?
Q: Will this work on the countyline 3 point auger?
3 years ago1 Answer
- A: Yes, this will work on a Countline 3-pt Digger.3 years agoHelpful?
Q: How thick is the material for the flutes?
3 years ago1 Answer
- A: The material thickness is 0.3".3 years agoHelpful?
Q: Will this work with the 400 model for AgKNX 400 series pots hold digger?
3 years ago1 Answer
- A: Per the description: Heavy-duty 3-point auger bit compatible with 2 in. round drive post hole diggers; attaches to most 2 in. gearbox output shafts3 years agoHelpful?
1 - 10 of 11 Questions
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 11 Questions
Newest questions
Q: What type of extension would fit this auger if I want to dig deeper than 48”?
10 months ago1 Answer
- A: Depends on the output shaft side of your gearbox. For this particular auger, you will need 2" round extension. You can give us a call to discuss the plan. Thank you10 months agoHelpful?
Q: What is the actual inside diameter of the auger shaft that fits over the gearbox's output shaft?
11 months ago1 Answer
- A: per my calipers, 2 5/128" or 51.84mm or 2.04" Cheers11 months agoHelpful?
Q: what are the bolt hole centers for the 2" shaft?
a year ago1 Answer
- A: We're not sure what measurement you are asking for. From the end of the shaft to the center of the bolt holes?a year agoHelpful?
Q: will it fit a 3033 r John deer
3 years ago1 Answer
- A: I'm not really sure what the question is. The 12" HD auger will fit a 2" round drive gearbox output shaft. For the John Deere 3033R, I would recommend our Model 650 post hole digger. This post hole digger has a 2" round output shaft from the gearbox and you can use the 12" HD auger. Without the post hole digger you can't use the auger on the tractor. Hope this helps. Thanks3 years agoHelpful?
Q: Will this work on your Model 650 Post Hole Digger, plan on it being used with a kubota 4701?
3 years ago1 Answer
- A: This is a pretty big tractor. Our model 1500 would be the best fit for this. Thanks3 years agoHelpful?
Q: Is the thickness of the first flute .3" (where the cutting tips mount)or is that the thickness of the main flute ? If the main flute is that thick, it is a heavy duty auger.
3 years ago1 Answer
- A: The thickness is hard to measure based on how the flighting is manufactured. The flat material is made from 0.229" thick steel. The base flighting is the same as the main flighting other than the revolutions.3 years agoHelpful?
Q: Will this dig a 48" deep hole?
3 years ago1 Answer
- A: Yes, the length of the auger is 48" so to dig a 48" deep hole you need to drive the auger the full length.3 years agoHelpful?
Q: Will this work on the countyline 3 point auger?
3 years ago1 Answer
- A: Yes, this will work on a Countline 3-pt Digger.3 years agoHelpful?
Q: How thick is the material for the flutes?
3 years ago1 Answer
- A: The material thickness is 0.3".3 years agoHelpful?
Q: Will this work with the 400 model for AgKNX 400 series pots hold digger?
3 years ago1 Answer
- A: Per the description: Heavy-duty 3-point auger bit compatible with 2 in. round drive post hole diggers; attaches to most 2 in. gearbox output shafts3 years agoHelpful?
1 - 10 of 11 Questions
Similar Items
-
-
-
-
-
-
-
Top Rated
-
-
-
-
-
Reviews
Summary of Reviews
The auger is generally well-received for its quality, performance, and value. Many users found it effective for digging holes, even in difficult soil conditions. The auger is described as sturdy and easy to use. However, some customers reported minor quality control issues that required additional w...
- English
- German
- French
- Spanish
- Portuguese
- Italian
- Korean
- Chinese
- Japanese
- Arabic
- quality
- wait time
1 to 4 of 50 Reviews .
1 – 4 of 50 Reviews
Most Recent
Lawrence, KS
Reviews 2
4 out of 5 stars.
Auger
6 months ago
Good auger and is very quick and efficient. Bring extra set of sheer pins with you to the job site to save a lost afternoon of work.
SweepstakesYes
Anonymous
Monroe, Ga.
Review 1
5 out of 5 stars.
12 inch auger
9 months ago
Great product. The auger looks and works good.
SweepstakesYes
Response from ToolTuff Direct Team:
8 months ago
ToolTuff Direct Team
We appreciate your purchase!
Anonymous
Cumberland County, PA
Review 1
5 out of 5 stars.
Great Buy
a year ago
Replaced my old 12” auger. This one has replaceable cutting teeth and center screw, digs much better and straighter. I like the collar giving it extra strength. Fit perfect on my 1960s PTO driven gearbox. I’m surprised the 2” collar and shear bolts are still the same pattern. Great buy, much cheaper online.
SweepstakesYes
Yes, I recommend this product.
Response from ToolTuff Direct Team:
a year ago
ToolTuff Direct Team
We appreciate your purchase!
Belton, MO
Reviews 5
5 out of 5 stars.
Great Tool
a year ago
High Quality, Heavy Duty. Easy to connect to transmission.
SweepstakesYes
Yes, I recommend this product.
Response from ToolTuff Direct Team:
a year ago
ToolTuff Direct Team
Thank you for purchasing!