YesWelder 110V/220V/205 Amps Stick/Lift TIG 2-in-1 Stick Welder, Big LED Display, Dual Voltage, Hot Start
YesWelder 110V/220V/205 Amps Stick/Lift TIG 2-in-1 Stick Welder, Big LED Display, Dual Voltage, Hot Start
Online Only
Item # 2439574
Buy a Welder and Get 15% off Welder accessories.
Get everything you need
Neighbor’s Club Members earn points with purchases.
Online Only
Item # 2439574
Buy a Welder and Get 15% off Welder accessories.
This item is available online only
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
ARC-205DS PRO is a Stick / Lift TIG 2-in-1 welder, designed for easy welding with most 6010, 6011, 6013, and 7018 electrodes. This welder is programmed with an automatic Hot start function to increase the current when starting, providing a fast, high-quality, and stable arc. The Arc force & Anti-stick prevent electrodes from sticking to the workpiece, allowing you to obtain deeper and smother seams. This welder comes with a big LED display for easy adjustment and reading the welding data. It is 110V and 220V dual voltage compatible, with a welding current up to 250 amps, which is suitable for various kinds of metal materials, such as stainless steel, mild steel, cast iron, sheet metal, and square pipe. This welder is programmed with over-current protection, overload protection, and temperature control to guarantee safety. It is compact and portable design, suitable for professionals and DIY users.WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ADVERTENCIA: Este producto puede exponerlo a sustancias qumicas que el Estado de California reconoce como causantes de cncer y defectos de nacimiento u otros daos reproductivos. For more information: www.P65Warnings.ca.gov
Looking for more information on welders? Check out our guide on welding in the product documents section.
- 110V /220V, 60Hz dual voltage compatiable
- With Hot Star, Arc Force, and Anti-stick functions
- Big LED display for easy setting and reading the welding data
- Over current protection, over load protection and temperature control
- Automatic compensation for voltage fluctuation
- Input current: 40A@110A & 30A@220V
- Insulation Grade: F
- Protection Degree: IP21S
| Brand | YesWelder |
|---|---|
| Country of Origin | Imported |
| AC/DC Stick | DC stick |
| Amperage Adjustments | 20-205 A |
| Compatible Metal | Stainless Steel, Carbon Steel, Steel |
| Electrode Cable Length | 9.84 ft. |
| Features | Hot Star, Arc Force, and Anti-stick functions, Big LED display, Over current protection, over load protection and temperature control, Automatic compensation for voltage fluctuation |
| Maximum Electrode Size | 4 mm |
| Maximum Open Circuit Voltage | 65 V |
| Maximum Welding Amperage | 205A |
| Maximum Material Thickness | 15mm |
| Minimum Amperage Output | 20A |
| Minimum Electrode Size | 1.6 mm |
| Minimum Generator Power Required | 7.5 KW |
| Power Cord Length | 6.56 ft. |
| Product Height | 9.45 in. |
| Product Length | 11.81 in. |
| Product Weight | 8.38 lb. |
| Product Width | 5.12 in. |
| Welding Applications | Stick Welding (SMAW) |
| Warranty | 1 year |
| Welder Input Voltage | 110V, 220V |
| Welding Applications | TIG Welding (GTAW) |
| Work Cable Length | 98.42 ft. |
| Manufacturer Part Number | ARC-205DS PRO |
Q: What cables does it come with?
2 months ago- A: The YesWelder ARC-205DS PRO sold at Tractor Supply includes a 10 ft. electrode holder cable, a 10 ft. work clamp cable, a 6.56 ft. power cord, and a 110V/220V adapter. While the unit is designed for both stick and lift TIG welding, the TIG torch is not included and must be purchased separately.2 months agoHelpful?
Q: How thick of metal can you weld with this welder
4 months ago- A: Hi, the YesWelder ARC-205DS PRO can weld up to 1/2 inch (12.7 mm) of mild steel when using 220V input power, and up to 1/4 inch (6.35 mm) of steel with 110V input power.3 months agoHelpful?
Q: Can this do aluminum angle stock?
7 months ago- A: No, the YesWelder 110V/220V/205A Stick/Lift TIG 2-in-1 Stick Welder (ARC-205DS) cannot be used for welding aluminum angle stock. A representative for the brand confirmed that this model "cannot weld aluminum".7 months agoHelpful?
Q: Will it weld 1/4 frame
8 months ago- A: Hello, thank you for your question. Yes, it can weld 1/4" steel.8 months agoHelpful?
Q: Can it weld aluminum
a year ago- A: Hi, This model can not weld aluminum.a year agoHelpful?
Q: This welder says it does DC Big and a Tig torch is pictured in the ad, but it has no.gas connection, what does it use for shield gas when welding in the mode? Does the fit torch just attach to a.regulator directly?
a year ago- A: Hi Paul, Thanks for reaching out. You will need to buy a separately Lift TIG torch for this model if you would like to use the TIG function. The model No. is YesWelder WP-17V 13ft, there is an extra pipe attached to the Lift TIG torch, which can directly connect to the gas tank. Thanksa year agoHelpful?
Q: What amps breaker is needed for the power source
a year ago- A: Hi Bill, Thanks for reaching out, we recommend to use a 45-60A breaker for this welder. Thanksa year agoHelpful?
Q&As
Q: What cables does it come with?
2 months ago- A: The YesWelder ARC-205DS PRO sold at Tractor Supply includes a 10 ft. electrode holder cable, a 10 ft. work clamp cable, a 6.56 ft. power cord, and a 110V/220V adapter. While the unit is designed for both stick and lift TIG welding, the TIG torch is not included and must be purchased separately.2 months agoHelpful?
Q: How thick of metal can you weld with this welder
4 months ago- A: Hi, the YesWelder ARC-205DS PRO can weld up to 1/2 inch (12.7 mm) of mild steel when using 220V input power, and up to 1/4 inch (6.35 mm) of steel with 110V input power.3 months agoHelpful?
Q: Can this do aluminum angle stock?
7 months ago- A: No, the YesWelder 110V/220V/205A Stick/Lift TIG 2-in-1 Stick Welder (ARC-205DS) cannot be used for welding aluminum angle stock. A representative for the brand confirmed that this model "cannot weld aluminum".7 months agoHelpful?
Q: Will it weld 1/4 frame
8 months ago- A: Hello, thank you for your question. Yes, it can weld 1/4" steel.8 months agoHelpful?
Q: Can it weld aluminum
a year ago- A: Hi, This model can not weld aluminum.a year agoHelpful?
Q: This welder says it does DC Big and a Tig torch is pictured in the ad, but it has no.gas connection, what does it use for shield gas when welding in the mode? Does the fit torch just attach to a.regulator directly?
a year ago- A: Hi Paul, Thanks for reaching out. You will need to buy a separately Lift TIG torch for this model if you would like to use the TIG function. The model No. is YesWelder WP-17V 13ft, there is an extra pipe attached to the Lift TIG torch, which can directly connect to the gas tank. Thanksa year agoHelpful?
Q: What amps breaker is needed for the power source
a year ago- A: Hi Bill, Thanks for reaching out, we recommend to use a 45-60A breaker for this welder. Thanksa year agoHelpful?
Similar Items
-
-
-
-
-
-
Top Rated
-
-
-
-
-
-
Top Rated
Items You May Like
-
-
Top Rated
-
-
-
-
-
-
-
-
-
-
Top Rated
Customers Also Bought
-
-
Top Rated
-
-
-
-
-
-
Top Rated
-
-
-
Top Rated
-
Top Rated
Reviews
- price
- quality
- small
Welder
Yes, I recommend this product.
Quick and easy
Yes, I recommend this product.
Great quality
Yes, I recommend this product.