The Ultimate Trailer Jack 2,000 lb. Capacity Lift Capacity Trailer Jack
$99.99
The Ultimate Trailer Jack 2,000 lb. Capacity Lift Capacity Trailer Jack
The Ultimate Trailer Jack 2,000 lb. Capacity Lift Capacity Trailer Jack
Item # 105898799
$99.99
Get everything you need
Neighbor’s Club Members earn points with purchases.
The Ultimate Trailer Jack 2,000 lb. Capacity Lift Capacity Trailer Jack
Item # 105898799
$99.99
New Cardmembers earn a $75 Reward‡ with qualifying purchase of $75 or more plus earn 5% in Rewards+ on this purchase. Valid through 7/12/26.
Shopping at
Grassland (franklin) TN
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
Try the Ultimate Trailer Jack Trailer Jack on your boat trailer, four-wheeler trailer, jet ski trailer, lawn mower trailer, farm equipment, camper trailer, utility trailer and cargo trailer. The trailer jack retracts flush with bottom of trailer eliminating potential damage to the jack and the trailer as a result of hang-ups or snags while crossing uneven terrain. A mounting bracket may be welded or bolted onto the trailer jack. The easy grip handle on the trailer jack allows for safer and easier cranking.one year limited warranty related to manufacture only
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
- Quick release locking pin allows for faster operation of the trailer jack
- All metal construction for value and durability
- Interior roller bearings for product performance, easier cranking power and trailer jack longevity
- 2000 lb. lift capacity
- Zinc-coated trailer jack for maximum corrosion resistance
- Rapid quick release adjustment saves time
- 14 in. of rapid adjustments with seven available height settings
- Pre-drilled for optional foot pad or wheel
- In addition to the rapid adjustments, there is an additional 14 in. available by cranking the handle
- No extra blocks needed under trailer jack to gain extra height
- Easy grip handle for safe cranking
- Retracts flush with the bottom of the trailer to eliminate potential damage to the jack and trailer
| Brand | The Ultimate Trailer Jack |
|---|---|
| Country of Origin | Imported |
| Base Type | Steel |
| Collapsed Height | 18 in. above base and 2 in. below base |
| Compatibility | Fits most trailers with standard A-frame mount |
| Crank Type | Top Wind |
| Extended Height | 26 in. |
| Features | Rust/Corrosion Resistant |
| Handle Length | 7 in. |
| Hoist Lift Height | 14 in |
| Hoist Weight Capacity | 3000 lb |
| Lift Capacity | 2,000 lb. |
| Mechanism Type | Mechanical |
| Mounting Type | Other |
| Power Type | None |
| Primary Material | Steel |
| Product Height | 30 in. below mounting bracket fully extended |
| Product Length | 22 in. |
| Product Weight | Approx.. 12 lb. |
| Product Width | 2-1/4 in. |
| Retracted Height | 2 in. |
| Jack Style | A-Frame |
| Tube Width | 2-1/4 in. |
| Warranty | One year limited on manufacturing only |
| Manufacturer Part Number | RDJ-2K |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 21 Questions
Newest questions
Q: Is it 2000 lb tongue weight?
4 months ago1 Answer
- A: Hi Neighbor! Yes. The Ultimate Trailer Jack with a 2,000 lb. lift capacity is designed to handle a maximum tongue weight of 2,000 lbs.4 months agoHelpful?
Q: Top of the page1 of the manual says (Tri-Base & Side Mount) and I see a product question" Do you make a side mount for boat trailers?" and the answer is "No we do not.." This is confusing to me- what does the Side Mount on the manual refer to?
3 years ago1 Answer
- A: Please see the video and picture provided by the vendor for instructions for use.3 years agoHelpful?
Q: need a bearing washer,where can i get one or specs on on one
4 years ago1 Answer
- A: Please review the link below. https://www.tractorsupply.com/tsc/search/bearing%20washer4 years agoHelpful?
Q: I have issues with the jack dragging. What is the minimum extension? If not less than 8", do you have an accessory to shim the jack mounting plate above the frame to reduce the overall extension?
5 years ago3 Answers
- A: Mine will pull up all the way to the bottom frame of my trailer only leaving like 2 inches below the trailer so I don’t have a dragging issue5 years agoHelpful?
Q: What is the warranty or expected lifespan of this jack?
5 years ago1 Answer
- A: Click here for warranty info: https://media.tractorsupply.com/is/content/TractorSupplyCompany/Assets/Product%20Images/1003/1058987_Man2.pdf5 years agoHelpful?
Q: What is the max trailer weight?
5 years ago1 Answer
- A: Lift Capacity: 2,000 lb.5 years agoHelpful?
Q: I've had this about 2 years. My main problem is the shaft binding up. What do you recommend to lubricate it? Since it sits between the rig and the trailer, grease picks up all kinds of dirt pretty quickly.
7 years ago1 Answer
- A: You can take an oil can and apply oil to the shaft of the jack just above the top of the jack and below the handle. It will run down through the jack and oil the threaded shaft that raises and lowers the jack. Also we recommend WD-40.7 years agoHelpful?
Q: my trailer is not an A-Frame but a 3" square tube.Currently have a bolt on style but can't tell model/manufacturer..Is there a way to mount or what jack do you suggest
7 years ago1 Answer
- A: This jack will not work on your specified trailer. We suggest a side mount jack with wheel.7 years agoHelpful?
Q: Can you elaborate more on what it takes to remove the entire body from the mounting flange? Is it practical to remove it every time after you attach the trailer t the tow vehicle ball? (I want to attach a hitch mount bike rack to a double receiver)
7 years ago1 Answer
- A: You could remove the jack every time, but you will have to loosen black plastic before removing it and also remove any wheel or foot attached to bottom of jack7 years agoHelpful?
Q: will SKU #184001399 fit the ultimate jack for a foot?
8 years ago1 Answer
- A: SKU 1840013 is for jacks with a 2 in tube width. The Ultimate Trailer Jack has a 2-1/4 in tube width. This would not fit as a foot for the jack.8 years agoHelpful?
1 - 10 of 21 Questions
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 21 Questions
Newest questions
Q: Is it 2000 lb tongue weight?
4 months ago1 Answer
- A: Hi Neighbor! Yes. The Ultimate Trailer Jack with a 2,000 lb. lift capacity is designed to handle a maximum tongue weight of 2,000 lbs.4 months agoHelpful?
Q: Top of the page1 of the manual says (Tri-Base & Side Mount) and I see a product question" Do you make a side mount for boat trailers?" and the answer is "No we do not.." This is confusing to me- what does the Side Mount on the manual refer to?
3 years ago1 Answer
- A: Please see the video and picture provided by the vendor for instructions for use.3 years agoHelpful?
Q: need a bearing washer,where can i get one or specs on on one
4 years ago1 Answer
- A: Please review the link below. https://www.tractorsupply.com/tsc/search/bearing%20washer4 years agoHelpful?
Q: I have issues with the jack dragging. What is the minimum extension? If not less than 8", do you have an accessory to shim the jack mounting plate above the frame to reduce the overall extension?
5 years ago3 Answers
- A: Mine will pull up all the way to the bottom frame of my trailer only leaving like 2 inches below the trailer so I don’t have a dragging issue5 years agoHelpful?
Q: What is the warranty or expected lifespan of this jack?
5 years ago1 Answer
- A: Click here for warranty info: https://media.tractorsupply.com/is/content/TractorSupplyCompany/Assets/Product%20Images/1003/1058987_Man2.pdf5 years agoHelpful?
Q: What is the max trailer weight?
5 years ago1 Answer
- A: Lift Capacity: 2,000 lb.5 years agoHelpful?
Q: I've had this about 2 years. My main problem is the shaft binding up. What do you recommend to lubricate it? Since it sits between the rig and the trailer, grease picks up all kinds of dirt pretty quickly.
7 years ago1 Answer
- A: You can take an oil can and apply oil to the shaft of the jack just above the top of the jack and below the handle. It will run down through the jack and oil the threaded shaft that raises and lowers the jack. Also we recommend WD-40.7 years agoHelpful?
Q: my trailer is not an A-Frame but a 3" square tube.Currently have a bolt on style but can't tell model/manufacturer..Is there a way to mount or what jack do you suggest
7 years ago1 Answer
- A: This jack will not work on your specified trailer. We suggest a side mount jack with wheel.7 years agoHelpful?
Q: Can you elaborate more on what it takes to remove the entire body from the mounting flange? Is it practical to remove it every time after you attach the trailer t the tow vehicle ball? (I want to attach a hitch mount bike rack to a double receiver)
7 years ago1 Answer
- A: You could remove the jack every time, but you will have to loosen black plastic before removing it and also remove any wheel or foot attached to bottom of jack7 years agoHelpful?
Q: will SKU #184001399 fit the ultimate jack for a foot?
8 years ago1 Answer
- A: SKU 1840013 is for jacks with a 2 in tube width. The Ultimate Trailer Jack has a 2-1/4 in tube width. This would not fit as a foot for the jack.8 years agoHelpful?
1 - 10 of 21 Questions
Similar Items
-
-
-
-
-
-
-
-
Top Rated
-
Top Rated
-
-
Top Rated
-
Items You May Like
-
-
-
-
Top Rated
-
-
-
Top Rated
-
-
-
-
Top Rated
-
Top Rated
Customers Also Bought
-
-
Top Rated
-
-
-
-
-
-
Top Rated
-
-
-
Top Rated
-
Reviews
- satisfaction
- purchase
- installation
- price
- quality
- for tailgating
- adjustability
- design
1 to 4 of 670 Reviews .
1 – 4 of 670 Reviews
Most Recent
Anonymous
Review 1
5 out of 5 stars.
Great
2 months ago
So easy to install
SweepstakesYes
Pittsburgh, PA
Review 1
3 out of 5 stars.
Some install frustrations
5 months ago
Bought one of these jacks for a trailer couple years ago, and have loved the use. Bought these two and both of the trailers, from different manufacturers, need to have the Jack Mounts bored out before we can finish installing them. Not sure what has changed, but it is a frustrating install, and hope they are as useful as the original one. Also, the neck of the Jack is a little wider, so more difficult to get sockets in, and have to manually finish tightening the bolts into the mount !!!
SweepstakesYes
Yes, I recommend this product.
Alabama
Review 1
5 out of 5 stars.
6 months ago
It seems to work great. I had to weld a little skid plate onto the existing one though. The little foot just wasn't cutting it. Other than that, it works well for it purpose.
Yes, I recommend this product.
Review 1
1 out of 5 stars.
Throw your money out of the window !
a year ago
This LOOKS exactly what you need ,it is designed to go on Barbie trailer .Weak is the proper description.