Permatex 50 mL Gasket Maker
Holiday Deal
Permatex 50 mL Gasket Maker
Item # 163785499
Neighbor’s Club Members earn points with purchases.
This item is available online only
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Neighbor’s Club Members earn points with purchases.
This Permatex Gasket Maker is a single component, medium-strength, thixotropic, anaerobic sealant that cures rapidly. The gasket maker sealant cures when confined in the absence of air between close fitting aluminum surfaces. It provides a tough, resilient, solvent and temperature resistant seal that flexes with flange movement caused by vibration, pressurization, or thermal changes.
- This single component, medium-strength, thixotropic, anaerobic sealant cures rapidly
- Delivers a tough, resilient, solvent, and temperature resistant seal that flexes with flange movement caused by vibration, pressurization, or thermal changes
- Cures when confined in the absence of air between close fitting aluminum surfaces
- The automobile gasket maker does not require mixing
- Non-corrosive to aluminum or cast iron parts for safe use
- Cannot cure outside of the joint
- The non-corrosive gasketing material is designed primarily for use on aluminum, iron, and steel flanged mating surfaces
- Ideal for on-the-spot and emergency repairs or when a conventional gasket is unavailable
- Fills gaps up to .015 in. and cures to a solvent-resistant seal that will not tear or decay during service
- The parts of this medium-strength gasket maker disassemble easily even after extended service
- Old gasket material can be removed in minutes with a simple putty knife for convenience
- This motorcycle gasket maker is also OEM specified
- Suggested applications for automobiles include: machined aluminum metal components, transmission pans, transmission case covers, transaxle casings, transfer cases, split crankcases, pumps, and housings
- Suggested applications for motorcycles include: machined aluminum metal components; transmission pans, transmission case covers, transaxle casings, axle covers, gear cases, split crankcases, pumps, housings, and with O-ring replacement
- Suggested marine applications include: crank case flanges drive unit joints and with O-ring replacement
- Suggested heavy-duty applications include: case covers, power divider shaft housings, input/output power shafts, PTO covers to housing, cover housing gasket, differential, assembly to rear axle housing, power dividers, and axle shaft flanges
- Volume: 50 ml tube
- NSF White Book registered for assurance
- Gasket-making directions: Clean both flange surfaces and remove paint, dirt, grease or old gasket completely. Spray Permatex Surface Prep activator on one surface only and allow it to dry 1-2 minutes. Apply a continuous bead of sealant to the unprimed surface. Assemble the mating surfaces with minimal lateral movement. Excess sealant can be wiped away with a cloth and shop solvent.
- Gasket-dressing directions: Clean both flange surfaces and remove paint, dirt, grease or old gasket completely. Spray Permatex Surface Prep activator on one surface only and allow it to dry 1-2 minutes. Completely cover both sides of the pre-cut gasket with sealant and place the coated gasket on the flange. Assemble mating surfaces with minimal lateral movement.
| Brand | Permatex |
|---|---|
| Country of Origin | Made in USA |
| Cure Time | 4-24 hr. |
| Features | Solvent Resistant |
| Flash Point | 203 deg. F |
| Maximum Temperature | 400 deg. F |
| Minimum Temperature | -45 deg. F |
| Package Quantity | 50 ml |
| Product Height | 6 in. |
| Product Length | 4 in. |
| Product Weight | 0.25 lb. |
| Product Width | 3 in. |
| Volume | 50 mL |
| Manufacturer Part Number | 51813 |
No questions have been asked about this product.
No questions have been asked about this product.
Q&As
No questions have been asked about this product.
No questions have been asked about this product.