Marathon Motors 3-1/2 HP 230V Electric Air Compressor Motor, 3,600 RPM
Marathon Motors 3-1/2 HP 230V Electric Air Compressor Motor, 3,600 RPM
Item # 324119299
$399.99
Sale
Was529.99
Save $130 (25%)
or
or
Neighbor’s Club Members earn points with purchases.
Marathon Motors 3-1/2 HP 230V Electric Air Compressor Motor, 3,600 RPM
Item # 324119299
$399.99
Sale
Was529.99
Save $130 (25%)
or
or
$45/mo.† suggested payments with 12 Months Financing or earn $26 in Rewards+ on this purchase.
Out of stock at
Grassland (franklin) TN
Delivery to
Pickup Nearby at FAIRVIEW TN(13.2) miles FREE
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Neighbor’s Club Members earn points with purchases.
The Marathon Motors 3-1/2 HP Electric Air Compressor Motor is made to get the job done right. This air compressor motor can be used for commercial and residential air compressors, fans, dairy and poultry equipment and table saws. The capacitor start/capacitor run design of the air compressor motor reduces the amperage needed. The electric air compressor motor has manual reset thermal protection and a rigid base. Made with carbon steel, this compressor motor is designed for durability and strength.
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
- Power: 3-1/2 HP
- Backed by a 1-year limited warranty
- Speed: 3,600 RPM
- 230V
- Fl amps: 15
- 56 frame
- Shaft size: 5/8 in.
- Drip-proof electric air compressor motor
- Rigid base air compressor motor
- Ball bearings
- Manual reset thermal protection
- Capacitor start/capacitor run design for reduced amperage
- Single phase footed air compressor motor
- Single direction (clockwise rotation)
- General-purpose air compressor motor
- Applications of the air compressor motor include: Commercial and residential air compressors, fans, dairy and poultry equipment and table saws
| Brand | Marathon Motors |
|---|---|
| Country of Origin | Imported |
| Amperage | 15A |
| Compatibility | NONE |
| Hertz | 60 Hz |
| Horsepower | 3.5 HP |
| Maximum RPM | 3,600 RPM |
| Minimum RPM | 3,450 rpm |
| Frame Type | 56 |
| Phase | Single |
| Primary Material | Carbon Steel |
| Product Height | 8.16 HEIGTH |
| Product Length | 12.64 LENGTH |
| Product Weight | 35 lb. |
| Product Width | 6.42 WIDTH |
| Shank Diameter | 9/14 in. x 1-6/7 in. |
| Stage Type | N/A |
| Voltage | 230V |
| Warranty | 1 Year Limited |
| Manufacturer Part Number | GEX09040 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 4 of 4 Questions
Newest questions
Q: will this operate on 208 volts?
a year ago1 Answer
- A: Hello Neighbor, The short answer is yes, this motor will operate on 208v. Most motors are usually rated to run at +-10% voltage, so this falls within that range, however we would not recommend doing so due to the potential for reduced performance, lifespan, and overheatinga year agoHelpful?
Q: Doc54 Would this motor be good for operating a hydraulic system like a forging press?
6 years ago1 Answer
- A: The manufacturer has advised that they would not recommend using this with anything other than an air compressor as it is only rated for an air compressor.6 years agoHelpful?
Q: Can this motor be powered with a generator?
7 years ago1 Answer
- A: According to factory the 9040 is not to be run with a generator. The motor will run on a generator But will shorten the life of the motor a lot. It will blow out the start & run capacitors. This also voids warranty.7 years agoHelpful?
Q: Motor says its CW rotation. Is the rotation direction viewed from the output shaft end or the connection end (what I would call the rear) of the motor? Hoping the CW rotation is viewed from the rear.
9 years ago1 Answer
- A: It would be viewed from the rear.9 years agoHelpful?
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 4 of 4 Questions
Newest questions
Q: will this operate on 208 volts?
a year ago1 Answer
- A: Hello Neighbor, The short answer is yes, this motor will operate on 208v. Most motors are usually rated to run at +-10% voltage, so this falls within that range, however we would not recommend doing so due to the potential for reduced performance, lifespan, and overheatinga year agoHelpful?
Q: Doc54 Would this motor be good for operating a hydraulic system like a forging press?
6 years ago1 Answer
- A: The manufacturer has advised that they would not recommend using this with anything other than an air compressor as it is only rated for an air compressor.6 years agoHelpful?
Q: Can this motor be powered with a generator?
7 years ago1 Answer
- A: According to factory the 9040 is not to be run with a generator. The motor will run on a generator But will shorten the life of the motor a lot. It will blow out the start & run capacitors. This also voids warranty.7 years agoHelpful?
Q: Motor says its CW rotation. Is the rotation direction viewed from the output shaft end or the connection end (what I would call the rear) of the motor? Hoping the CW rotation is viewed from the rear.
9 years ago1 Answer
- A: It would be viewed from the rear.9 years agoHelpful?
Similar Items
-
-
-
-
Top Rated
-
Top Rated
-
-
-
Top Rated
-
Top Rated
-
-
-
Top Rated
Items You May Like
-
-
-
-
-
-
Top Rated
-
-
Top Rated
-
-
-
-
Top Rated
Reviews
- purchase
- installation
- packaging
- powerful
- price
- reliable
- holding
- satisfaction
1 to 4 of 23 Reviews .
1 – 4 of 23 Reviews
Most Recent
Review 1
5 out of 5 stars.
Just what I needed
7 years ago
Perfect replacement motor for my husky air compressor
Yes, I recommend this product.
Soso
Review 1
5 out of 5 stars.
Works great
7 years ago
Works perfect. Lot cheaper than others I found. Would buy again
Yes, I recommend this product.
Reviews 2
4 out of 5 stars.
Warning wired for 220v
7 years ago
Even though the box started it was a 120v replacement motor, it was wired for 220v. I notice a slow start and no power. Immediately turned it off. Was able to rewire with diagrams of side of motor.
Lawton ok
Reviews 2
5 out of 5 stars.
Looks great
7 years ago
Bought it to replace old motor compressor then just end up buying brand new compressor instead motor probably would’ve worked pump was bad
Yes, I recommend this product.