Marathon Motors 5 HP 208-230V Electric Air Compressor Motor
$699.99
Marathon Motors 5 HP 208-230V Electric Air Compressor Motor
Marathon Motors 5 HP 208-230V Electric Air Compressor Motor
Item # 112548099
$699.99
or
or
Add a protection plan
Powersport plans are not available in CA & MD.
Neighbor’s Club Members earn points with purchases.
$699.99
or
or
$39/mo.† suggested payments with 18 Months Financing or earn $34 in Rewards+ on this purchase.
Valid 8/24/2026 - 9/7/2026
Valid 8/24/2026 - 9/7/2026
Out of stock at or near
Grassland (franklin) TN
Out of stock delivering to
37027
Add a protection plan
Powersport plans are not available in CA & MD.
Neighbor’s Club Members earn points with purchases.
Keep the job running smoothly with this Marathon Motors Electric Air Compressor Motor. The Marathon Motors Electric Air Compressor Motor features a Capacitor Start/Capacitor Run design for reduced amperage. This 5-HP compressor motor is suitable for commercial and residential air compressors, fans, dairy and poultry equipment, and table saws. Backed by a 1 year limited warranty.
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
- Air compressor motor is suitable for commercial and residential air compressors, fans, dairy and poultry equipment, table saws
- 5-HP, 3600 RPM, 208-230 V motor provides ample power
- FL Amps: 22.0
- 56Hz frame
- 7/8 shaft size
- Drip-proof, rigid base for quality
- Single-phase footed air compressor motor offers manual reset thermal protection
- Capacitor Start/Capacitor Run design for reduced amperage
- Gexpro Cat # GEX0B386
- 1 year limited warranty
| Brand | Marathon Motors |
|---|---|
| Country of Origin | Imported |
| Amperage | 22A |
| Compatibility | NONE |
| Hertz | 56 Hz |
| Horsepower | 5 HP |
| Maximum RPM | 3,600 RPM |
| Minimum RPM | 3,600 rpm |
| Frame Type | 56Hz |
| Phase | Single |
| Mounting Type | Bracket |
| Primary Material | Carbon Steel |
| Product Height | 9.09 HEIGHT |
| Product Length | 14.56 LENGTH |
| Product Weight | 49 lb. |
| Product Width | 6.5 WIDTH |
| Rotation Direction | Clockwise |
| Shank Diameter | 78 DIAMETER |
| Stage Type | N/A |
| Voltage | 230V |
| Warranty | 1 Year |
| Manufacturer Part Number | GEX0B386 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 10 Questions
Newest questions
Q: Will this motor replace Ingersoll Rand motor for SS4 model IR# 23378805
4 years ago1 Answer
- A: Please contact the manufacturer at 615-742-7000.4 years agoHelpful?
Q: Is this product made in the USA
6 years ago1 Answer
- A: No, it is imported.6 years agoHelpful?
Q: Where can I find a wiring diagram at to reverse winding direction. Called the manufacturer and I was transferred with no end solution.
7 years ago1 Answer
- A: Per the manufacturer this information can be obtained at https://www.regalbeloit.com/Products/Catalog?model=5KC36LN7.7 years agoHelpful?
Q: can the rotation be changed it is turning counter clock wise in stead of clock wise
7 years ago1 Answer
- A: No, it cannot be changed. It is not by directional.7 years agoHelpful?
Q: What is the shaft diameter of this motor?
8 years ago1 Answer
- A: 7/8” shaft diameter.8 years agoHelpful?
Q: Is this motor water proof, we are replacing on on a powerwasher?
9 years ago1 Answer
- A: No, this motor is not waterproof.9 years agoHelpful?
Q: The specs indicate clockwise rotation; from which end? Shaft end or other end? How do I change direction if necessary?
9 years ago1 Answer
- A: The rotation of the motor is clock wise. The rotation is determined by looking down the motor opposite drive end. IE standing behind motor looking across to shaft end. That would be clock wise. Unfortunately, this motor can not be reversed.9 years agoHelpful?
Q: what kind of oil we can add if needed and where is the location of oil plug?
9 years ago1 Answer
- A: The motor is electric and needs no oil. Also, the bearings are sealed so no lube is needed.9 years agoHelpful?
Q: What is the length of the motor shaft
9 years ago1 Answer
- A: The overall length of shaft is 2.25”. The keyway is cut 1.40” from end of the shaft.9 years agoHelpful?
Q: The website says that the list motor is CW rotation only. The nameplate on the motor in the pic shows this motor to be reversable. Which is correct?
10 years ago1 Answer
- A: We spoke with the manufacturer. The motor rotates both directions. We will correct the error on our website.10 years agoHelpful?
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 10 Questions
Newest questions
Q: Will this motor replace Ingersoll Rand motor for SS4 model IR# 23378805
4 years ago1 Answer
- A: Please contact the manufacturer at 615-742-7000.4 years agoHelpful?
Q: Is this product made in the USA
6 years ago1 Answer
- A: No, it is imported.6 years agoHelpful?
Q: Where can I find a wiring diagram at to reverse winding direction. Called the manufacturer and I was transferred with no end solution.
7 years ago1 Answer
- A: Per the manufacturer this information can be obtained at https://www.regalbeloit.com/Products/Catalog?model=5KC36LN7.7 years agoHelpful?
Q: can the rotation be changed it is turning counter clock wise in stead of clock wise
7 years ago1 Answer
- A: No, it cannot be changed. It is not by directional.7 years agoHelpful?
Q: What is the shaft diameter of this motor?
8 years ago1 Answer
- A: 7/8” shaft diameter.8 years agoHelpful?
Q: Is this motor water proof, we are replacing on on a powerwasher?
9 years ago1 Answer
- A: No, this motor is not waterproof.9 years agoHelpful?
Q: The specs indicate clockwise rotation; from which end? Shaft end or other end? How do I change direction if necessary?
9 years ago1 Answer
- A: The rotation of the motor is clock wise. The rotation is determined by looking down the motor opposite drive end. IE standing behind motor looking across to shaft end. That would be clock wise. Unfortunately, this motor can not be reversed.9 years agoHelpful?
Q: what kind of oil we can add if needed and where is the location of oil plug?
9 years ago1 Answer
- A: The motor is electric and needs no oil. Also, the bearings are sealed so no lube is needed.9 years agoHelpful?
Q: What is the length of the motor shaft
9 years ago1 Answer
- A: The overall length of shaft is 2.25”. The keyway is cut 1.40” from end of the shaft.9 years agoHelpful?
Q: The website says that the list motor is CW rotation only. The nameplate on the motor in the pic shows this motor to be reversable. Which is correct?
10 years ago1 Answer
- A: We spoke with the manufacturer. The motor rotates both directions. We will correct the error on our website.10 years agoHelpful?
Similar Items
-
-
-
-
-
-
Top Rated
-
-
-
-
-
-
Reviews
- purchase
- price
- warranty
- large
- noise level
- application
- for rainy weather
- product features
1 to 4 of 73 Reviews .
1 – 4 of 73 Reviews
Most Recent
Review 1
5 out of 5 stars.
Electric Motor
2 years ago
Good quality and fit rite in place
2023 Q4 SweepstakesYes
Review 1
5 out of 5 stars.
great motor, good price
3 years ago
have had great luck with this motor, replaced ingersol rand that went out, would recommend
Review 1
5 out of 5 stars.
electric motor for stand up compressor
3 years ago
The store had in stock was easy to pick up. I will be back for my other needs. Staff super helpful.
Yes, I recommend this product.
Louisiana
Review 1
1 out of 5 stars.
Don’t lose your receipt!
4 years ago
Don’t lose your receipt! If you do and even though they can remember you have bought 3-4 of them they still won’t warranty it and the manufacture says the store is liable so that game too
No, I do not recommend this product.