Skip to Main Content

Marathon Electric Air Compressor Motor, 2 HP

SKU # 324117699
Product price

Save Up To
See price at checkout Why?
Product Rating is 3.6

Financing Available! Click here for more details...


Delivery Options:

Protect Your Purchase

We'll fix it, replace it, or reimburse you for it. Learn More

power plus

Item Information

The Marathon Electric Air Compressor Motor is made to get the job done right.

  • Gexpro cat# GEX09035
  • 2 HP
  • 3,600 RPM
  • 115/230 V
  • Fl amps: 17/8.5
  • 56 Frame
  • 5/8 shaft size
  • Drip proof
  • Rigid base air compressor motor
  • Ball bearings
  • Manual reset thermal protection
  • Capacitor start/capacitor run design for reduced amperage
  • Single phase footed motor
  • Single direction (clockwise rotation only) general purpose
  • Applications include: Commercial & residential air compressors, fans, dairy & poultry equipment, table saws
  • 1 year limited warranty

Specification Description
Brand: Marathon Motors
Amperage: 17/8.5 A
Frame Type: 56
Hertz: 60 Hz
Manual Overload Protection: Yes
Motor Phase: Single
Open Drip Proof Housing: Yes
Product Type: Air Compressor Motors
Product Weight: 51 lb.
Rotation Direction: Clockwise
Shank Diameter: 9/14 in. x 1-6/7 in.
Use: Air Compressor
Voltage: 115/230V
Warranty: 1-Year Limited
Power Type: Electric
Manufacturer Part Number GEX09035
Marathon Electric Air Compressor Motor, 2 HP is rated 3.6 out of 5 by 5.
Rated 4 out of 5 by from Solid yet inexpensive motor I use this to drive a custom built electric lawn mower. Packs plenty of power. Probably run it 3 hrs straight once a week. Only complaint is it's not reversible, limiting its applications.
Date published: 2016-05-28
Rated 1 out of 5 by from Be careful! Not so much a review of the motor but for TSC; as RLWPE mentioned, the rotation is actually CCW when looking directly at the shaft, instead of CW as stated online, and on the store shelf. I bought this motor to replace a table saw motor, and I can't imagine a saw configuration that would use this non-reversible motor, as the product description suggests. This reflects quality; a simple decal on the motor indicating shaft rotation and better attention to product detail would have saved half of my time today.
Date published: 2013-10-18
Rated 4 out of 5 by from I bought this motor to modify a belt sander I bought from Harbor Freight, and I was not disappointed. It runs fast and hard, and works like a charm. The only way it could get better would be if it had a switch installed, but it's not a problem.
Date published: 2012-12-09
Rated 4 out of 5 by from Rotation The web site should specify that the "clockwise" rotation is from the motor side. From the shaft side, where most drive products are specified from, the rotation is counter-clockwise and the rotation is not reversible. Therefore, this motor cannot be used on many table saws as stated on the web site as a suitable use for this motor. Also, the packaging could have been better. The sheet metal legs were bent during shipment. Not a big deal to fix, but could have been avoided with proper packaging. I had to return the motor, due to the fixed rotation direction. Other than these issues, it seemed like a quality product.
Date published: 2012-05-13
  • y_2018, m_8, d_15, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_324117699, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_tractorsupply
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 5ms

Will this motor work for a Porter Cable Single Stage Oillube Compressor model CPLC7060V-1

Asked by: Will13
The GEX09035 should work fine on the Porter Cable compressor as long as it is same spec motor on compressor as the Marathon GEX9035 replacement. We do not have any specs on a Porter Cable part number.
Answered by: BrittanyH
Date published: 2017-11-14

Motor description states CW (clockwise) rotation. Viewed from which direction? I have seen motor rotation direction referenced looking from eirther direction, shaft end or back end...

Asked by: DSG_Ohio
Rotation is measured from rear of motor over to shaft.
Answered by: AmandaW
Date published: 2018-06-15
  • y_2018, m_8, d_15, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_324117699, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING)]
  • clientName_tractorsupply
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 4ms