KBS Coatings 1 qt. Clear DiamondFinish 1K Water Coating, Direct To Metal or Other Coatings
$59.39
Sale
Was$65.99
Save $6.60
KBS Coatings 1 qt. Clear DiamondFinish 1K Water Coating, Direct To Metal or Other Coatings
Limited Time Deal
Online Only
KBS Coatings 1 qt. Clear DiamondFinish 1K Water Coating, Direct To Metal or Other Coatings
Item # 2381943
Color:
Get everything you need
Neighbor’s Club Members earn points with purchases.
Limited Time Deal
Online Only
KBS Coatings 1 qt. Clear DiamondFinish 1K Water Coating, Direct To Metal or Other Coatings
Item # 2381943
Color:
This item is available online only
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
Diamond Finish Clear is a crazy tough Clear Coat that can be applied Direct To Metal or over other coatings. Diamond Finish Clear is a water clear high gloss clear coat that remains permanently flexible and is able to perform in the toughest environments without yellowing, cracking or peeling. Formulated to Apply Directly Over Other Coatings and Paints or Direct To Metal (DTM)! Permanent Clear Coat, High Solids (over 60%), and low VOC's Clear Coat. It's great for high temperature automotive applications including the use on cylinder heads, engine blocks, brake components and even inlet manifolds, without yellowing up to 300 Fahrenheit.
- Formulated to Apply Directly Over Other Coatings and Paints or Direct To Metal (DTM)!
- Permanent Clear Coat, High Solids (over 60%), and low VOC's Clear Coat.
- Ideal for Direct To Metal (DTM) applications - No Adhesion Additives Needed!
- Moisture Cured Urethane, an advanced coatings technology offering durability, flexibility, corrosion, and chemical resistance.
- Easy To Apply directly to Painted Surfaces with Minimal Surface Prep.
- Incredibly Tough and Hard like no other clear coat on the market.
- Water clear high gloss clear coat remains permanently flexible and is able to perform in the toughest environments without yellowing, cracking, or peeling.
- Exterior grade UV Stable Clear Coat. Diamond Finish Clear is not affected by sunlight. Does not chalk, yellow, or fade.
- Can be applied with a brush (without leaving any brush marks), roller and conventional spray gun.
- Compatible with fully cured water based acrylics, urethanes, and other water based base coats to add protection, durability, and clarity.
- Extremely easy to wet sand, cut, buff, and polish to create a deep mirror finish.
- Unlike normal two part (2K) coatings, no hardener or activator is needed. You can simply stir well and go. Diamond Finish ClearCoat will cure without heat or UV lights in temperatures from 50 to 86 Fahrenheit.
- Can be applied directly to a cured Automotive basecoat, Standard solid color paints, and Single Part (1K) or Two Part (2K) paints. It can be applied to Ferrous Metals such as mild steel, carbon steel, stainless steel, cast iron, and wrought iron. It can also be applied to Non-Ferrous metals including Aluminum, Alloys, Brass, Chrome, and Copper.
- Able to withstand the harshest of chemicals including fuels, solvents, Battery acid, Brake fluid, Ethanol, Methanol, MEK, Hydrochloric Acid, Fertilizers, and Acetone.
- Great for high temperature automotive applications including the use on cylinder heads, engine blocks, brake components and even inlet manifolds, without yellowing up to 300 Fahrenheit.
- Once fully cured, Diamond Finish Clear is 100% non-toxic
- Wet sand, cut, buff, and polish to create a deep mirror finish
| Brand | KBS Coatings |
|---|---|
| Country of Origin | Made in USA |
| Cleanup | Other |
| Container Size | 32 oz. |
| Coverage Area | 100 sq ft |
| Dry to Touch | 3-8 hr. |
| Features | Easy To Apply |
| Finish | Gloss |
| Minimum Application Temperature | 55 deg. F |
| Package Quantity | 1 quart |
| Paint Base | Other |
| Recommended Number Of Coats | 2 |
| Time Before Recoating | 4 hr. |
| VOC Content | 195 g/l |
| Warranty | 2 Years Unopened |
| Color | No Color |
| Manufacturer Part Number | 8404 |
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 25 Questions
Newest questions
Q: Can this be applied over a lacquer finish on wood?
13 days ago1 Answer
- A: Hi Neighbor! Yes, KBS Coatings DiamondFinish Clear can be applied directly over a lacquer finish on wood. Because of its moisture-cured urethane formula, it adheres to fully cured coatings.12 days agoHelpful?
Q: is this good for polished copper
a month ago1 Answer
- AI-assistedA: Hi Neighbor- Yes, this clear coat is ideal for non-ferrous metals, including copper. It can be applied directly to metal without the need for adhesion additives and provides a high-gloss, permanent finish that is resistant to chemicals and corrosion.a month agoHelpful?
Q: Can this be applied over rusted galvanized corrugated steel
2 months ago1 Answer
- AI-assistedA: Hi Neighbor- Yes, this clear coat can be applied directly to metal, including non-ferrous metals like alloys and ferrous metals like steel. It is designed for direct-to-metal (DTM) applications with minimal surface preparation and provides corrosion and chemical resistance.a month agoHelpful?
Q: Can this be applied over oil based enamel?
2 months ago1 Answer
- AI-assistedA: Hi Neighbor Yes, this clear coat can be applied over standard solid color paints and single-part (1K) or two-part (2K) paints. It is designed to be applied directly over other coatings and paints with minimal surface preparation.2 months agoHelpful?
Q: Is this product water based? What is used to clean up brushes and or equipment?
3 months ago1 Answer
- A: Hi Neighbor! KBS Coatings DiamondFinish Clear is a solvent-based, moisture-cured urethane, not water-based, despite the "water clear" description (which refers to its transparency). It is designed to be highly durable, flexible, and resistant to chemicals. Cleanup requires strong solvents like KBS #1 Thinner, Xylene, or Acetone.3 months agoHelpful?
Q: Can mica powder be added to this product? Or colorants
4 months ago1 Answer
- A: Hi Neighbor- Yes, you can add colorants and mica powder to KBS DiamondFinish 1K Clear to create custom metallic, pearlescent, or color-shifting effects, but it's crucial to mix it gently into the clear coat rather than shaking vigorously to prevent clumping and ensure even dispersion, often adding to a tinted base or clear topcoat for best results.4 months agoHelpful?
Q: What can it be reduced with?
6 months ago1 Answer
- A: Hi Neighbor! The manufacturer's recommended choice is KBS #1 Thinner as it is ideal for proper evaporation and leveling.6 months agoHelpful?
Q: Can I use it on a boat?
9 months ago1 Answer
- A: Hi Neighbor! Yes, you can use KBS Coatings DiamondFinish Clear on a boat.9 months agoHelpful?
Q: Can it be use on a boat under water
9 months ago1 Answer
- A: Hi Neighbor! Yes this can be used on a boat. Please see directions for application.9 months agoHelpful?
Q: Can you put it on fidergass
9 months ago1 Answer
- A: Hi Neighbor! Yes, this should work for this application.9 months agoHelpful?
1 - 10 of 25 Questions
Q&As
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 25 Questions
Newest questions
Q: Can this be applied over a lacquer finish on wood?
13 days ago1 Answer
- A: Hi Neighbor! Yes, KBS Coatings DiamondFinish Clear can be applied directly over a lacquer finish on wood. Because of its moisture-cured urethane formula, it adheres to fully cured coatings.12 days agoHelpful?
Q: is this good for polished copper
a month ago1 Answer
- AI-assistedA: Hi Neighbor- Yes, this clear coat is ideal for non-ferrous metals, including copper. It can be applied directly to metal without the need for adhesion additives and provides a high-gloss, permanent finish that is resistant to chemicals and corrosion.a month agoHelpful?
Q: Can this be applied over rusted galvanized corrugated steel
2 months ago1 Answer
- AI-assistedA: Hi Neighbor- Yes, this clear coat can be applied directly to metal, including non-ferrous metals like alloys and ferrous metals like steel. It is designed for direct-to-metal (DTM) applications with minimal surface preparation and provides corrosion and chemical resistance.a month agoHelpful?
Q: Can this be applied over oil based enamel?
2 months ago1 Answer
- AI-assistedA: Hi Neighbor Yes, this clear coat can be applied over standard solid color paints and single-part (1K) or two-part (2K) paints. It is designed to be applied directly over other coatings and paints with minimal surface preparation.2 months agoHelpful?
Q: Is this product water based? What is used to clean up brushes and or equipment?
3 months ago1 Answer
- A: Hi Neighbor! KBS Coatings DiamondFinish Clear is a solvent-based, moisture-cured urethane, not water-based, despite the "water clear" description (which refers to its transparency). It is designed to be highly durable, flexible, and resistant to chemicals. Cleanup requires strong solvents like KBS #1 Thinner, Xylene, or Acetone.3 months agoHelpful?
Q: Can mica powder be added to this product? Or colorants
4 months ago1 Answer
- A: Hi Neighbor- Yes, you can add colorants and mica powder to KBS DiamondFinish 1K Clear to create custom metallic, pearlescent, or color-shifting effects, but it's crucial to mix it gently into the clear coat rather than shaking vigorously to prevent clumping and ensure even dispersion, often adding to a tinted base or clear topcoat for best results.4 months agoHelpful?
Q: What can it be reduced with?
6 months ago1 Answer
- A: Hi Neighbor! The manufacturer's recommended choice is KBS #1 Thinner as it is ideal for proper evaporation and leveling.6 months agoHelpful?
Q: Can I use it on a boat?
9 months ago1 Answer
- A: Hi Neighbor! Yes, you can use KBS Coatings DiamondFinish Clear on a boat.9 months agoHelpful?
Q: Can it be use on a boat under water
9 months ago1 Answer
- A: Hi Neighbor! Yes this can be used on a boat. Please see directions for application.9 months agoHelpful?
Q: Can you put it on fidergass
9 months ago1 Answer
- A: Hi Neighbor! Yes, this should work for this application.9 months agoHelpful?
1 - 10 of 25 Questions
Similar Items
-
-
-
-
Top Rated
-
-
Top Rated
-
-
-
-
-
Top Rated
-
Items You May Like
-
-
-
-
-
-
Top Rated
-
-
-
-
-
-
Top Rated
Customers Also Bought
-
-
-
-
-
-
-
-
-
-
Top Rated
-
-
Top Rated
Reviews
- coats
- quality
1 to 4 of 12 Reviews .
1 – 4 of 12 Reviews
Most Recent
Indiana
Review 1
5 out of 5 stars.
Keep it like new.
3 months ago
I use this product as a clear coat on my custom painted fishing lures. Works great. I use it as a dip. Coats the lures with a clear thin coat that protects the lure from any harm.
SweepstakesYes
No, I do not recommend this product.
Maryland
Review 1
5 out of 5 stars.
KBS diamond clear
5 months ago
Excellent quality and exactly as described works great
Yes, I recommend this product.
Pentwater mi
Review 1
5 out of 5 stars.
Super clear
6 months ago
I've been looking for a product like this for a long time. Great stuff. Was looking for etching clear and found this
SweepstakesYes
Yes, I recommend this product.
Anonymous
Review 1
5 out of 5 stars.
Worked great.
7 months ago
Used this product to seal several fiberglass ladders that I use.It brought them back to life. No more loose fibers causing skin irritation. Dried rock solid. Full cure took around 48 hours.
SweepstakesYes
Yes, I recommend this product.