Won’t run without clogging. Tried new head but no difference. Also pressure only goes to 75psi, even with 120 psi coming in. What a waste of time and money!

Starting from the top. Loading material is less than ideal. It takes a LONG time with a funnel that will fit in the pressure tank cap. A solid 5 minutes to do 50lbs while holding the bag up. Next is the instruction on operation. The media adjustment is the last thing to do. You have to have the trigger pulled while adjusting the valve on the bottom most of the tank (which is essentially on the ground) . If you let the trigger go at all, the material backs up in the siphon tube quickly. thus you have to shut the valve for the material before you release the trigger... which essentially means you have no control over where youre spraying the media. Also the tube from the tank to the gun is only 8ft, which may seem ok from an advertising standpoint, but since the gun is straight,, so if youre working 3ft up on saw horses, and you have a min 2ft bend radius on the hose, you're pretty much out of hose already. The way that the gun works, if you don't shut off the media, it blows a the side of the nozzle apart. in 20lbs of material i smoked a nozzle, and clogged the main tube. yes operator error on both, but it's because normal operation is unorthodox

Definitely make sure that you have a strong enough air compressor for this unit. The one that I bought looked like it had been used before and I had to purchase additional parts to get it to work correctly.

Do not buy this product.   Keeps clogging.  Just have spent  Probably a bag of abrasive, unclogging and unclogging.  Dont do it.