J-B Weld 2 oz. HighHeat Epoxy Putty
J-B Weld 2 oz. HighHeat Epoxy Putty
Item # 104570499
Stocked & Ready
Spend $49.99 to unlock free delivery!
Get everything you need
Neighbor’s Club Members earn points with purchases.
Spend $49.99 to unlock free delivery!
Shopping at
Grassland (franklin) TN
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
J-B Weld HighHeat is a hand mixable epoxy putty stick specifically formulated to bond and repair materials that will be exposed to high temperatures in automotive and industrial maintenance applications. It cures to a tough, hard bond with little to no shrinkage. This industrial-strength product outperforms conventional epoxy putties at high temperatures and sets in 1 hour at room temperature. After 8 hours, it can be drilled, tapped, machined, ground, filed and painted. HighHeat is rated at a strength of 4000 PSI and cures to a machine gray in color. It can withstand continuous heat exposure of 500 degrees F and intermittent heat exposure to 550 degrees F.
- Hand mixable epoxy putty stick specifically formulated to bond and repair materials that will be exposed to high temperatures
- Great for exhaust manifolds, tail pipes, mufflers, engine blocks, machinery and other high temperature projects
- Sets in 1 hour at room temperature, functionally cures in 8 hours and withstands continuous heat of 450 degrees F (500 degrees F intermittent)
- Once cured, it forms a permanent bond and can be drilled, tapped, machined, ground and filed
| Brand | J-B Weld |
|---|---|
| Country of Origin | Made in USA |
| Adhesion Level | High |
| Adhesive Surface Compatibility | Metal |
| Applicator Type | Other |
| Color When Applied | Gray |
| Color When Dried | Gray |
| Container Type | Tube |
| Cure Time | 8 hours |
| Dry to Touch Time | 1 hours |
| Features | High strength, High Temperature resistant |
| Indoor/Outdoor | Indoor and Outdoor |
| Maximum Application Temperature | 400 deg. F |
| Package Quantity | 1 |
| Product Height | 7.50 in. |
| Product Length | 1.25 in. |
| Product Weight | 2 oz. |
| Product Width | 3.87 in. |
| Recommended Adhesive Usage | Automotive |
| Volume | 2 oz. |
| Warranty | N/A |
| Manufacturer Part Number | 8297 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 26 Questions
Newest questions
Q: My glass oven door came apart from the original glue tabs, cant get the glue tabs at the moment so will this work to keep the oven glass door sealed from the bottom again? Thanks!
2 years ago1 Answer
- A: This does not adhere well to glass. I don't recommend an item for this due to the heat and glass.2 years agoHelpful?
Q: Zipper to canvas repair will this hold up I heat and water?
4 years ago1 Answer
- A: Yes, it will.4 years agoHelpful?
Q: Will this (or another JB Weld product) be the best to stop a leak in a cast iron hot water heat boiler?
4 years ago1 Answer
- A: To answer this inquiry please contact the manufacturer directly.4 years agoHelpful?
Q: Will this work on wood stove glass temporary? It usually burns around 300-350 degrees.
4 years ago1 Answer
- A: Yes. It is able to withstand continuous heat exposure of 400°F and intermittent heat exposure of 550°F. HighHeat is hand-mixable two part epoxy putty stick that is forumlated to repair and rebuild material that will be exposed to high temperatures in automotive and industrial maintenance applications.4 years agoHelpful?
Q: Will JB high heat stick to aluminum surfaces
4 years ago1 Answer
- A: Yes, it will work.4 years agoHelpful?
Q: Can this be used on copper fittings for a boiler heating system in the house?
4 years ago1 Answer
- A: No. we would not recommend using 8297 for a copper fitting on a boiler. We would recommend using item 8265S, it will work better for copper and withstands a higher temperature. It can withstand temperatures as high as 550 degrees F, but your surface must remain completely dry for a full 24 hours.4 years agoHelpful?
Q: I have a crack on the side of my radiator. Will it stop the leak??
4 years ago1 Answer
- A: Yes. Great for exhaust manifolds, tail pipes, mufflers, engine blocks, machinery and other high temperature projects Sets in 1 hour at room temperature, functionally cures in 8 hours and withstands continuous heat of 400F (550F intermittent)4 years agoHelpful?
Q: Can this product be used to patch a gas tank?
4 years ago1 Answer
- A: Great for exhaust manifolds, tail pipes, mufflers, engine blocks, machinery and other high temperature projects4 years agoHelpful?
Q: Will this expoxy stick and hold firm aluminum caliper covers onto original calipers? Tried another brand and came off after a day.
4 years ago1 Answer
- A: If you are putting this inside the wheel the vibrations are going to be to much for an epoxy to handle.4 years agoHelpful?
Q: I have a hole in my exhaust manifold about the size of a pea. Can it seal that?
5 years ago1 Answer
- A: HighHeat is 3x stronger at higher temperatures than conventional epoxy puttys and can be tapped and drilled. MAJOR USES: Exhaust Manifolds, Tail Pipes, Mufflers, Engine Blocks, Duct Work, Machinery and other high temperature equipment.5 years agoHelpful?
1 - 10 of 26 Questions
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 26 Questions
Newest questions
Q: My glass oven door came apart from the original glue tabs, cant get the glue tabs at the moment so will this work to keep the oven glass door sealed from the bottom again? Thanks!
2 years ago1 Answer
- A: This does not adhere well to glass. I don't recommend an item for this due to the heat and glass.2 years agoHelpful?
Q: Zipper to canvas repair will this hold up I heat and water?
4 years ago1 Answer
- A: Yes, it will.4 years agoHelpful?
Q: Will this (or another JB Weld product) be the best to stop a leak in a cast iron hot water heat boiler?
4 years ago1 Answer
- A: To answer this inquiry please contact the manufacturer directly.4 years agoHelpful?
Q: Will this work on wood stove glass temporary? It usually burns around 300-350 degrees.
4 years ago1 Answer
- A: Yes. It is able to withstand continuous heat exposure of 400°F and intermittent heat exposure of 550°F. HighHeat is hand-mixable two part epoxy putty stick that is forumlated to repair and rebuild material that will be exposed to high temperatures in automotive and industrial maintenance applications.4 years agoHelpful?
Q: Will JB high heat stick to aluminum surfaces
4 years ago1 Answer
- A: Yes, it will work.4 years agoHelpful?
Q: Can this be used on copper fittings for a boiler heating system in the house?
4 years ago1 Answer
- A: No. we would not recommend using 8297 for a copper fitting on a boiler. We would recommend using item 8265S, it will work better for copper and withstands a higher temperature. It can withstand temperatures as high as 550 degrees F, but your surface must remain completely dry for a full 24 hours.4 years agoHelpful?
Q: I have a crack on the side of my radiator. Will it stop the leak??
4 years ago1 Answer
- A: Yes. Great for exhaust manifolds, tail pipes, mufflers, engine blocks, machinery and other high temperature projects Sets in 1 hour at room temperature, functionally cures in 8 hours and withstands continuous heat of 400F (550F intermittent)4 years agoHelpful?
Q: Can this product be used to patch a gas tank?
4 years ago1 Answer
- A: Great for exhaust manifolds, tail pipes, mufflers, engine blocks, machinery and other high temperature projects4 years agoHelpful?
Q: Will this expoxy stick and hold firm aluminum caliper covers onto original calipers? Tried another brand and came off after a day.
4 years ago1 Answer
- A: If you are putting this inside the wheel the vibrations are going to be to much for an epoxy to handle.4 years agoHelpful?
Q: I have a hole in my exhaust manifold about the size of a pea. Can it seal that?
5 years ago1 Answer
- A: HighHeat is 3x stronger at higher temperatures than conventional epoxy puttys and can be tapped and drilled. MAJOR USES: Exhaust Manifolds, Tail Pipes, Mufflers, Engine Blocks, Duct Work, Machinery and other high temperature equipment.5 years agoHelpful?
1 - 10 of 26 Questions
Similar Items
-
-
-
-
Top Rated
-
-
-
-
-
-
-
-
Reviews
1 to 4 of 24 Reviews .
1 – 4 of 24 Reviews
Most Recent
Hoover Alabama
Reviews 3
4 out of 5 stars.
Great to seal holes but does not harden up
a year ago
Good stuff but does not hard enough as the desription says. I put ion my charcoal pit due to I had holes on the side and bottom on the smoker and the putty seems to do ok but it is not what I was expecting for 10 dollars a tube to me it was not worth it.
No, I do not recommend this product.
ivyg38
Review 1
5 out of 5 stars.
Strong and Heat Resistant Epoxy Putty
2 years ago
First, I want to state that I received this product in exchange for my honest review. The JB Weld high heat temperature resistant epoxy putty is great for jobs that require a strong bond that can withstand high heats. It can withstand continuous heat up to temperatures of 450 degrees Fahrenheit. I was able to use this to put 2 pieces of metal that needed to be bonded together. This table needed to be able to withstand heat due to the nature of the job. No complaints here!
Originally posted on JBWeld.com
cassandrad52
Review 1
5 out of 5 stars.
Great to have on hand!
2 years ago
My husband usually keeps a package of JN Weld Putty on hand. He was excited to receive the HighHeat Epoxy Putty version to have on hand when he needs it for high heat projects!
Originally posted on JBWeld.com
crystallee99
Review 1
5 out of 5 stars.
Tough, long lasting
2 years ago
I received this product free through influenster in exchange for my honest review.
JB weld is a great product to have on hand, it truly is so powerful and does what it claims. I was talking to family members about it and they told me all the ways they’ve used JB weld in the past and they’ve never had it fail ever. Those uses included fixing a dropline for fishing and truck engines, they swear by it. It’s definitely a quality product that you can trust.
Originally posted on JBWeld.com